craMP2706

It's a leak isn't it? What to do? Covered by warranty or something?

I'm now getting notifications from CAM saying that CPU fan is at 0 RPM but it is showing that it's at 920 RPM, it's usually at 450. So it's probably the pump right?

I can't tell if can hear it or not the fans are too loud. Would changing the thermalpaste cancel my RMA?

Okay, just found out that a zip tie has been touching the back of the motherboard where the socket is could that be the reason? When I remove the AIO are there any "clues" to look for on the pump, cpu or something else?

I don't have another cooler and I don't have any friends with one I can borrow. Is the cpu or mobo completely ruled out as being the cause for the issue?

One of the tubes is a bit warm near the pump. I just booted and got to nothing but a black screen, a reboot got me the CPU temp error and then BIOS with temps at 89C

It did feel warm but not much and I haven't noticed any stuttering. I have used the AIO since the pc was built.

Yes, it was pre applied

Yesterday my pc's fans started going full speed despite the pc being idle so I looked at my temperatures using NZXT CAM and it hit 94°C while usage was at 4% so I quickly shut it down. After maybe 2 minutes I turned it back on and got "CPU temperature error" I pressed F1 to run setup and got to the BIOS. While in the BIOS my CPU temperatures started rising with about 1-2 °C per second, I turned it off before it hit 90°C. After having it turned off over night I booted up and got to windows but it didn't take long before the fans started speeding up and the temps hitting 98°C with 6% usage, so I shut it down. I have had it turned on a few times throughout the day but all with the same result. I built my pc (first time) in July 2016 and haven't had any issues at all, till now. The cooler is connected to water pump and not CPU fan (I have tried connecting the cooler to CPU fan but with the same result), my normal temps are at 24°C to 66°C depending on usage. I am not using Corsair Link for the cooler as I found that the fans got too loud (even after adjusting fan curves) while it was installed. I have ordered some Noctua NT-H1 thermalpaste so will reinstall the cooler with fresh thermalpaste when it arrives. This is my first time ever using a forum so I have no idea what I'm doing, hope it was posted correctly My specs: Asus Maximus VIII Hero Alpha i7 6700K not overclocked 16GB Corsair Vengeance LPX Corsair H100i V2 GTX 980 Reference Corsair RM750x PSU