Jump to content

For Science!

Member
  • Posts

    5,365
  • Joined

  • Last visited

Everything posted by For Science!

  1. Have you tried this with all other PSU cables apart from the 24-pin ATX removed? It sounds like something is triggering some sort of protection
  2. You should always have inhibitor additives, and change water on a regular schedule.
  3. Set pump to a constant speed, and fans tied to coolant temperature. Nothing else required.
  4. I have not checked recently, but if you have specific interests in a particular coolant, I could have a look.
  5. IIRC most BIOSes I have dealt with let you save profiles on USB sticks that you can load up quickly. I personally think the chances of a small controller dying is much higher than a well-cooled motherboard dying, so to me it feels like your solution to the problem is simply another point of failure.
  6. I don't quite see the logic of "I want the cooling controls to be functional in case the main board breaks" --> If the mainboard is dead, why bother having a functional cooling system for it? I control my watercooling system through BIOS using 2-pin temperature headers on the mainboard itself. In the past I have also integrated flow sensors through fan_headers. These are OS agnostic settings, so fan curves are applied across all OSes, including linux.
  7. Imo Bambu labs has not been around for long enough to know its true "long-term" potential. Especially given its relatively closed ecosystem and proprietary parts, its a bit hazy outlook. Furthermore, if you look at issues with the AMS system, you can see there are teething problems that need addressing by the company. Obviously you are in the prusa territory, I personally really enjoyed using the Mk3S+(ish) and can recommend it. If input shaping ever releases on the Mk4, that would also make it faster generally too,
  8. As I said: So no, I am not okay with what is being done with the moon by Samsung. The comment you quoted me on is specifically about whether only a true-single exposure is considered a photo or not.
  9. I'll just grab my tin foil hat and say that Samsung has started developing a massive death-laser on the moon, and so want to make sure its details are never captured by "enhancing" the image and thereby wiping any images of the death laser.
  10. Ultimately, each to their own definitions and to gate-keep what they consider a "photo". I would for example consider a panoramic photo to be a "photo", but you evidently would not - and that's fine. A weird line to draw for example a single long-exposure with a star tracker vs stacking aligned shorter exposures in post.
  11. "fake" is a controversial term imo, its just a form of composite postprocessing. At least in the example you describe. Not much difference imo between HDR, or focus stacking macrophotography, or stacked astrophotography, or arguably long-exposures with filters. Photography has come a long way from a single exposure on film being the only thing considered a photo. I do agree that however the line should be drawn when you bring in detail to an image that was never captured in the first place. You can't make up the signal and claim it was captured.
  12. Also, tasty water is not pure water, removing all the ions is not going to achieve good tasting water. If the water is safe to drink, have you considered just passing it over a britta filter (for example) to see whether ion exchange is sufficient
  13. I think you're over simplifying the matter, and I would also recommend you to get professional help. Making drinking water is no joke task. But to answer your question, in terms of ease of removal Insoluble solids (dirt) --> Insoluble liquids (oils) --> Soluble charged compounds (Ions) --> Soluble partially charged organics would be order of ease of removal.
  14. Noise is somewhat of a delicate beast given that how it sounds to you will differ on its location and what its touching. So a D5 pump out in the open not resonating against anything may be quieter or noisier than if its in a enclosed case. Having said that I don't see any issue with testing it out, just be aware that you may not know what speed you are going to run your pump at, you need a suprisingly low flow to be adequate, and that can be achievable with relatively low D5 pump speeds,
  15. Yes it looks good to me. Also 2 loops almost makes sense here as you may want to turn on one system without turning on the other? If it was 1 loop you'd either have one idling pump if the other system was not on.
  16. Sounds like it depends on a certain brass fitting, but by default the way you have it looks like the suitable way. If you aren't bothered to opening it up yourself, you should contact EKWB support.
  17. Sulfur and iron or dirt, color...taste ect. are not methods of water purification, so yeah, reverse osmosis will be a better method than no method. However RO is generally a last polishing step for already clean water, so if you have dirty water, it is not so practical to use RO to clean it up, think of other pre-purification steps such as resin affinity, or distillation.
  18. I would have thought a true fresh install off windows would have achieved a wipe. So if that is the case, it may be hardware issues. As said above, you could try you Integrated graphics to see if it can output the correct resolution. Can't completely rule out the monitor is somehow buggy too, so worth seeing with the integrated GPU.
  19. Graphics drivers often leave ghosts that can't be removed with just writing over it with a new driver. In a nutshell DDU is a utlity to remove the drivers completely in safemode, so that then you can actually do a proper new installation of freshdrivers.
  20. Did you install the front base driver and ROG connect Plus? Did you install it correctly with power, ROG extension, and AAFP cable? Is the Front Base Firmware up to date?
×