felix920506

2 minutes ago, Spotty said:

None of those PSUs.

What motherboard are you using? Do you already have a motherboard or are you looking to buy?
 

2x6TB drives in RAID1 will give you 6TB of storage, not 12TB.

I have a ASUS M4A785D-M Pro and a Gigabyte GA-M61PME-S2P
If None of those PSUs what should I use?

I would go with Ryzen for Encoding

Building My own Nas but can't decide what components to use
Already Decided:
2 6TB Nas Drives in RAID 1

8GB of DDR2-800 Non ECC

This box is for Purely Storing Files
Will Be accessed from Windows MacOS Linux iOS Android

I installed 4GB of Ram into a board but it only shows 3319MB in the BIOS

CPU: Pentium D 820
MB: Gigabyte GA-8I945GZME-RH
RAM: Kingmax DDR2-800 2GB *2

This board requires Floppy to update BIOS but I don't have a Floppy Drive

9 minutes ago, paddy-stone said:

Did you check in BIOS that it had actually reset to defaults though... just asking as I have seen BIOS bugs where it didn't reset properly.

Oh i found out that it just wont post with DDR2-800 sticks but it works with DDR2-667 sticks

Just now, paddy-stone said:

Did you reset CMOS?

Yes. Multiple times

I have a RC410-M2 Rev 2.1 Board From ECS

Is it possible to run Core 2 Duo/Quad CPUs on this board with a bios mod?
If so Can anyone Tell me how to mod it or do it for me?

CPU: Core 2 Quad Q8300
Mobo: EG31M V1.1 from Acer Prebuilt
 

this board won't POST if I use other Ram sticks instead of the one it came with.
The one it came with is a Kingston DDR2-667 2GB Stick
I tried ram from Samsung, Transcend, Umax, Kingmax, Adata, Some No Name Sticks and even Kingston Ram and it wouldn't POST without using the stick it came with.

14 minutes ago, narrdarr said:

thought you tried different kit?

tried multiple kits

i think I tried ones from transcend Samsung and micron

3 hours ago, narrdarr said:

what is the model of the ram?

the stickers fell off

36 minutes ago, narrdarr said:

how many sticks do you have?

can you try 1 stick at a time?

do you have different ram to try?

other than that you can keep trying. i have a build where installing ram is vary touchy. i took several hours of reinstalling to get it to work. just make sure it is perfectly straight and insert with even pressure

Tried different configs,different sticks, All won’t work

3 minutes ago, narrdarr said:

reinstall the ram try different slot

Tried that already

CPU: AMD Phenom X4 9550

MB: Gigabyte GA-M61SME-S2

Ram: random DDR2 stock

Beep code: Ram error

All components known good

I got a ruckus zoneflex 7372 for free. After I reset it with a 30-30-30 reset I can't get into the settings page.

For some reason when i try to boot from a windows installation USB it just gets stuck

I pulled the CMOS battery out, let it sit for 10 minutes then installed the battery back, set the correct time and it worked!

35 minutes ago, Master Disaster said:

Go here

 

https://pcsupport.lenovo.com/gb/en/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thinkcentre-m82/downloads

 

Select BIOS, download the latest version and flash it. There's a readme on that site with instructions on how to do it.

It Won't even boot to the bios update CD

1 minute ago, Docretier said:

Did the computer function after the cpu change? If not it may be an incompatible cpu.

It POSTs and recognizes the new CPU and it even attempted to boot from PXE before I cleared the CMOS

BTW the CPU was changed

Just now, Master Disaster said:

Try opening BIOS then pressing F10 to save & exit without loading defaults. Does that help?

No

Just now, Master Disaster said:

Nevermind this ^^^^

 

Simply go into BIOS, load defaults, save & exit.

 

Source - https://www.manualslib.com/manual/462274/Lenovo-Thinkcentre-M82.html?page=73

Tried that, Still the same

2 minutes ago, Master Disaster said:

Looks like it's a TPM issue, go into BIOS and see if there's an option to reset the TPM or failing that to disable it entirely.

Can't find one

I Picked an old Thinkcentre M82 that was originally used in a company.

It was trying to boot to PXE so I cleared the CMOS

then this screen showed up when I tried to boot prompting me to press F1 to enter setup

Some keys on my keyboard stop working randomly (Esc,Windows,Ctrl,Alt are known to have this problem and fail at the same time)

The keys start working again after a reboot then it fails again after some time.

Keyboard: Logitech G610 Blue

OS: Windows 10 Pro 1803

I have a Xeon E5 ES CPU with the IHS saying:

Sandy Bridge EP

Need a NON GIGABYTE MB