-
Posts
66 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by louij2
-
nvidia RTX 3080 Founders Edition Overheating Memory
louij2 replied to louij2's topic in Graphics Cards
The main issue with fixing it is there is a lack of good quality thermal pads available at the moment. I can't find the 3mm fibre glass ultra soft pads Igor used alas I will try 1.5mm ThermalRight pads 12 W/m.K for the dies and 3mm AABCOOLING Thermopad 6W/mK for the back of the card- 13 replies
-
- rtx
- founders edition
-
(and 3 more)
Tagged with:
-
nvidia RTX 3080 Founders Edition Overheating Memory
louij2 replied to louij2's topic in Graphics Cards
Idle temps are 50/55c Great to hear that Steve will cover an issue as I thought it was a non issue. Also seems like a bit of oversight from Nvidia cheaping out on thermal pads...- 13 replies
-
- rtx
- founders edition
-
(and 3 more)
Tagged with:
-
nvidia RTX 3080 Founders Edition Overheating Memory
louij2 replied to louij2's topic in Graphics Cards
+150- 13 replies
-
- rtx
- founders edition
-
(and 3 more)
Tagged with:
-
nvidia RTX 3080 Founders Edition Overheating Memory
louij2 replied to louij2's topic in Graphics Cards
Yeah if overclocked & depends on the game and how long I'm playing. The cooler seems good just Nvidia cheaped out on the thermal pads of they used ultra soft ones for some manufacturing reason. Also I saw this https://www.igorslab.de/en/simple-pad-mod-for-the-force-rtx-3080-founders-edition-slowers-the-gddr6x-temperature-by-a-whopping-8-degrees/- 13 replies
-
- rtx
- founders edition
-
(and 3 more)
Tagged with:
-
Hi I can't seem to get my Memory junction temps lower than 108/110c. I have 80mm fans pointed at my 3080 and it's not helping at all. I have even tried with the card outside the case but Junction is 110c whilst core is 35c! Do I really have to water cool my brand new card and void warranty? Only thing I can think of is thermal pads but warranty too... At this rate the card wont last long. I have a 6800 xt and the junction temps on that never go above 80c This issue appears when mining dagger hashimoto and I can't go above 70/80 MH/s as mem overheats in seconds. I have some thermal pads on order as the ones they're using seem ultra soft and ultra low dissipation rate. New thermal pads and following this helps https://www.igorslab.de/en/simple-pad-mod-for-the-force-rtx-3080-founders-edition-slowers-the-gddr6x-temperature-by-a-whopping-8-degrees/
- 13 replies
-
- rtx
- founders edition
-
(and 3 more)
Tagged with:
-
Well I just did manual vcore at 1.28v and now my temps are 73c under load at 4.2ghz + PBO off
-
so I swapped cooler just in case but I still get the same temps with an air cooler
-
It's gone back up to 94c again
-
Okay so I have redone my paste and you just need to remember that even after 8 years of PC building you will not always get the thermal paste done right lol. On 83c from 88c, now which isn't really too much better though. Gonna see in Gigabyte forum if someone knows how to drop vcore offset
-
I remove the panels and it drops a bit but on auto vcore it's only the vcore I had before and I got better temps with 1.3v over auto
-
-
Got Ryzen master and get 93c on auto
-
-
I am trying to fold on my device and cpuid hwmonitor shows 78c just getting ryzen master
-
I have been folding on it for months do you think I should just turn it off?
-
Gonna take my top and front panel off again as it dropped a lot of c. So I did this and dropped to 79c from 88c
-
Okay but on auto it was even hotter than 90c, I'll try offset
-
Well if I set it to 1.25v manual mode it's unstable
-
NZXT Noctis 450
-
It's thermal throttling and I changed the paste when I upgraded the CPU recently and was fine before. I'm gonna check the mounting pressure and thermal paste of my cooler cos I had this problem before too. 1.3v 3.9 Ghz
-
My CPU load is 100%
-
Hi My vcore is 1.3v manually configured cos auto caused this problem of high temps before. My cooler is NZXT X62.
-
Hi I purchased CForce CF015Cv2 after looking at the many videos of people getting it to work in Mojave. I am able to get it working in Manjaro, Windows 10 & Yosemite but if I try in any later OS X I am presented with a grey static display? I contacted their support and was told Apple removed the firmware but this makes no sense to me if YouTubers got it working? I have tried another USB C cable and another newer Macbook but it does not work. download.jfif