mghgs91

both in seprate loop or in single Loop.

l have deattached the tubes of my antec 920 and cooler master sedion 120. i have ordered a 240 rad and a 12v dc pump. now my question is that can i connect external pump with both pumps in single loop or should i connect them seperately? i am going to use transparent tubing for all loop.

two r9 290 consumes 600w of power i.e. only 200w left for everything else.also running power supply on full load is not good for power supply.so i am considering vs450 to power only r9 290 alone. vs 450 provides single 12v rail with 34 amp current while a r9 290 needs maximum of 31 amp current.also will vs550 be any good? it can provide 42 amp of current on single 12v rail.

i know but to power only single gpu.is vs series so bad? on current gs800 i have to run everything on stock.but i want to overclock everything.

but there is no space for overclocking.

does 12v rail current output(amperage) matters.

what's your recommendation.because i am using corsair gs800 for four years.its now powering my both r9 290.(no problem, no fan ramp) but i want be on safe side.so buying another psu.

what minimum power smps would be required to power only one r9 290.other hardware will be running on seperate power supply.would a corsair vs 450 be perfect. it have 34 amp on its 12 volt rail.or a corsair vs 550 which have 42 amp on its 12 volt rail.

also take a look at this

i know that two r9 290 pulls near 600w maximum, and its a 800w continuous power supply, nothing overclocked. how possibly it could be smoky smoky

can u please elaborate these platform( CX, CWT PUQ-B) things

CORSAIR GS800 -800w continuous power, 880w peak power.

can corsair gs800 handle two r9 290, both running on stock, one water cooled and one on stock cooler. i have 2tb seagate hdd+1tb seagate hdd+128gb ssd+i5 4670k at stock clock(water cooled)+6 case fans+8gb ram. motherboard is msi h87m-g43.