Ubuntubr

Extremely hot? PBO gets the cpu to 5ghz and gpu is only 90ºC on the hotspot and it's aircooled....doesn't look like it's that hot. Also the psu was the problem. So yes pretty brave LOL. Never again though

So it's a PSU problem? Since the PC is not Overheating and the minimum requirements are met, by elimination it could be it. But after looking at windows event viewer i'm starting to think it's my Nvme...is this plausible?

Just as the title says. I'm getting random reboots when I enter a game (CS2, TCGR Breakpoint, Deep rock Galactic....). Sometimes it lets me play for hours, while sometimes it just reboots on bootup. Thought at first it was windows related so i formatted the pc. Then after releasing it didn't work tried to pull out the ram sticks. No luck also. No overclock applied. The last thing I did to the pc was change the AIO rads position. Temps are at low 70ºc in all cpu cores and 90 on the gpu. It's at a point that I suffered 3 reboots while writing this post. What should I do right now? CPU: Ryzen 7 5800x GPU: Asus Strix RX 5700 XT Mobo: Asus Crosshair VIII Hero Mem: Gskill trident Z 3600mhz 2*8gb PSU: Gigabyte 750M 80+gold Storage: 1x HDD 931GB Seagate ST1000DM003-1CH162NVME 1x NVME 931GB Western Digital WDC WDS100T2B0C-00PXH0 Cooler: Deepcool CASTLE 360RGB V2

So i'm having some trouble with mounting a 360 radiator to the front of the case since i'm trying to use a push pull config with two 200mm fans (sickleflow 200 argb). The problem is that the included fan radiator screws can't bite the radiator because of the dents that exist in the front of the chassis(i'd say 5 more mm would help). Thought of just mounting the 3 120mm fans and the 2 200mm fans to the case and letting the radiator chill in the middle with out mounting it because of this. It stays in place even if i have it not touching the bottom. Is there a work around or something i'm missing? Should I just leave the radiator sandwiched in between with out mounting it and call it a day?

I'm trying to get it down just because I do not think 80ºC is good for the cpu's expected life. I may be very wrong though.

So I have a H500p mesh case and I was wondering if I could get better CPU temps by changing my 360 AIO Deepcool Castle v2 from the top to the front and use the included 200mm as intakes and still have the 3x120mm on the rad as a pull config. I have 3 MF120R fans that I was wanting to put on the top after this. My current max temp is 85ºC on the CCD and 80.3ºC on the package. CPU: Ryzen 7 5800x (PBO2 hitting 5ghz While gaming) GPU: Asus Strix RX 5700 XT Mobo: Asus Crosshair VIII Hero Mem: Gskill trident Z 3600mhz 2*8gb PSU: Gigabyte 750M 80+gold Storage: 1x HDD 931GB Seagate ST1000DM003-1CH162NVME 1x NVME 931GB Western Digital WDC WDS100T2B0C-00PXH0 Cooler: Deepcool CASTLE 360RGB V2 IMG_20230207_222102.jpg

As the title says. I'm interested in using my MA610P to cool a Ryzen 7 5800x. But I'd like to know if it can and what are the temps I should be expecting.

So basically i'm looking for a software to control the RGB's in my system. But ASUS moved from Aura to Armoury and it does not let me control my rams individually nor can I control any other RGB device individually. Ended up downloading an older version of Aura and although it lets me set the parts to a specific color I can't access the frequency(Hz to make the mirage effect on the fans) or set different effect modes like static color on the fans and wave on the rams. Can anyone help? I will provide any necessary information that is not listed already. Part list: Mobo: Crosshair Hero 8 Ram: Trident Z RGB 3600mhz GPU:Strix RX 5700 Xt Cooler:MA610P Case:H500p Mesh Fans: 3x Cooler master MF120R RGB and 2x MF200R RGB ARGB Strip

So I recently bought a new pc and was going to start gaming, but I had a few issues. I bought a Crosshair hero 8, 16gbs of ram and an Rx5700 xt Strix. My cousin was going to give me a CPU so I did not bother looking for one. When he got to my house he had a R5 1400 processor which is not compatible with the MB. So to not go to a complete waste until the other CPU arrives, I thought why not put it in my old system(when I say old I mean Old). I get a black screen on boot to windows every time. After looking on some forums I found a way to boot. I need to make the PC boot using the internal GPU and use the rx5700xt as the gaming gpu. But there's a problem. Games are pretty lagy and it's not only the processor bottlenecking the card. When I open up a game the GPU clock and vram don't ramp up to the target and I get lots of FPS drops. Can someone help me? Old system specs: CPU: FX 8320E MB: Asus M5A78L-M / USB3 MEM: 8GB corsair DDR3 PSU: EVGA 600b bronze

So it's basically what the tittle says, every time I install CAM on my desktop it works until a reboot or shutdown. The next time I boot the system It freezes and I start having GPU problems. The first time I had this issues was with an old HD5850. Now I'm having this issue with an R9 270X. Both times I had to reflash the cards BIOS or it would not ramp up its clock or cause the GPU to not let the PC boot. Even tried removing the GPU and setting it in my friends system with the same result. The reflash was the only solution. Why am I worried if its fixed now you may ask. Well I recently saw a PC mod that you put an old cellphone in the PC so you could use it as a second screen to monitor temps and stuff. Thought it was nice since I could remove it if I wanted and since I do have an old fone just chilling in the closet. I wanted to know if there is a way to fix this or if there is a software thats "nice" looking just like CAM. Would like to have GPU,CPU, MEM and HDD info in one place. Customization is a factor that interest me on CAM. Any help? Current system AMD based: CPU: FX 8320E GPU: R9 270X black edition Memory: 10GB DDR3 1600mhz Storage: 480WD SSD MB: Asus M5A78L-M PSU: EVGA 600B non modular Case:Cooler Master H500P Mesh CPU cooler: Cooler Master MA610P Its a pretty old system that I will be switching for a new one by the end of the year.

My MA610P Is connected to the RGB controller that comes with it(a simple mode, color and brightness controller). But I'm looking for a Software controlled device.

So I was looking for a hub or something that would be able to control my RGB fans (3 Cooler master MF120R case fans and a Cooler master MA610P CPU cooler). My CPU cooler is connected to the CPU fan header so the bios is controlling its speed. My other 3 fans are right now connected to a fan controller that came with my case(which I can only control Low speed, off and High speed). I was looking for a hub that would be able to control the 3 fans speeds and the RGB from them and the CPU cooler. My mobo does not have a RGB header on it, and I think I may have shorted my other fan header(Will confirm later today). So basically I'm looking for something that I can connect to my mobo via Pci express or USB header that would allow me to control the speed and color of these fans. Is there such a thing? Or do I need to buy 2 different hubs to do this?

So thats the Elite. I have the normal Pulse. https://http2.mlstatic.com/fone-ps3-pulse-wireless-stereo-headset-71-original-sony-D_NQ_NP_944405-MLB25021676493_082016-F.jpg That's just like the one I have. But I saw that there is a wired version of it. https://images-americanas.b2w.io/produtos/01/00/item/113025/2/113025239SZ.jpg So I was wondering if I were to "install" a 3,5 or even a 2,5mm jack to it would it work?

So my friend recently gave me his old PS3 pulse headset because he bought a PS4 gold headset since the pulse was not charging. I fixed the charging problem and I want to use the headset to game on PC and on a Xbox one(ironic I know). So I was wondering if there was a way to plug it to the tv or on the xbox? Yes I know its not the best headset and I know its a Ps3 product. The thing is I never used headsets to game. I always used my phones earphones and after using the pulse I want to use it on the xbox too even if I get audio only the microfone I can use the kinects. My tv is a Sony KDL-40W600b. Any help?

Well I know it's an old LCD panel, but I am not currently living in the US. Here where I live a new monitor is too expensive for my current budget. A new panel would be 500-700 (60hz) and even more as the refresh rate climbs. The controller would be 100. I already have a 240hz monitor so this one would just be so I could have an extra and make it more portable.