ringo
-
Posts
451 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Posts posted by ringo
-
-
no, signal is always on max level, wifi stick is always on same place. My front panel (case is define R5) layout is:
1 2 3 4
1 and 2 are USB 2.0, 3 and 4 are USB 3.0
Running speedtest.net:
If wifi stick and usb stick are both in USB 3.0 (3 and 4) speed test doesn t start and I can t surf internet.
When usb storage stick is 2 and wifi stick is 3 or 4 everything is great.
-
On my case on front panel I connected couple of days ago my new USB wifi TP link 822n. Everything works great, internet speed is high and fluid. Today I connected usb storage stick next to that wifi on front panel and I noticed that my internet speed is slow. Both USB ports are USB 3.0 When I disconnect usb stick or connect it to USB 2.0 on front panel internet speed is high again. Is this normal? It si maxing usb power or somethng is broken?
-
hmmm then there is no point in buying used mech keyboard, keys it will eventually started to chatter. Since keyboard has more than 100 key it can become a problem that there is a chance that every once in a while new key will started to chatter. Maybe is better to buy some cheap new mech keyboard with full warratny.
-
Are all mechanical keyboard prone to this problem, even clones like kalih and outemu switches??
So dust inevitably goes in switch and chattering happens?
-
3 hours ago, mariushm said:
Any HDMI 2.0 cable will be good enough, HDR doesn't add a semnificant amount to the bandwidth requirement and your monitor is only 1080p.
Ex. this would work just as well : https://www.amazon.it/AmazonBasics-velocità-supporta-Ethernet-standard/dp/B014I8SSD0/
Are you 100% sure?
I already order that cable I posted, I was afraid because I read that it requires HDMI 2.0a
-
Does this cable support HDR10? I have benq Ew277HDR...
-
Does anybody here has Benq EW277HDR monitor (false HDR, I think it has HDR10 certificate)?
RX 580
HDMI cable is one that I got from monitor.
In Radeon setting color depth is set to 12bpc (it jump to 12bpc when I activate windows HDR option and it stays there after deactivation) and pixel format is set to Full RGB.
Monitor driver in installed.
Situation is this one:
On monitor I have button for HDR and in windows there is a HDR option. Do I need to activate both to have HDR? (when windows HDR is activated automatically monitor HDR in ON)
- When windows HDR is activated picture becomes flooded, when only monitor HDR button is activated I got notification on monitor OSD - HDR: Emulated and picture is brighter and not flooded
- In game like Hellblade Senua sacrifice (Windows HDR disabled) there is HDR option ingame, when I select it I got notification on Monitor OSD that HDR is ON. I tryed also with Windows HDR activated and in game graphics seems the same one like when I activated only monitor HDR.
- In game like PES 2019 option HDR is possible to activate only if windows HDR is turned ON.
On youtube video I will only get option HDR video in youtube settings if windows HDR is activated. Picture looks washed out. If I only activate monitor HDR I will get notification HDR: Emulated but on youtube videos I don`t have in settings HDR option. Picture will look a little brightier and little greenish.
My friend gave some movie in mkv format. On movie name it says that movie is HDR 1080p 10bit. If I watch with windows HDR on picture is washed out. With only monitor HDR activated it looks brighter and little greenish.
So what is the right way to use HDR while gaming, watching youtube HDR and watching movies?
-
5 minutes ago, Minibois said:
I mean.. Depends on how you look at them as extra button. It's not like macro buttons can add a 27th character to the alphabet, but they can make it more simple to do certain actions.
25 minutes ago, Uptivuptiz said:Not this time. But macros can be almost as powerful if you know how to use them
Main reason I bought this keyboard is because of them. It seemed very useful that I could add additional buttons in some games like RTS (group, building shortcut) or RPG (spells, potions), at least what I first imagined. Can you give me some short useful gaming example?
-
29 minutes ago, Uptivuptiz said:
Yes. They mimic other buttons or button combinations such as CTRL + Z.
24 minutes ago, Minibois said:They are macro buttons. Macro buttons mimic a specific button or combination of specific buttons.
Keep in mind some of the programs used to do macros are seen as cheating programs by some games.
Damn, I always thought that I would get additiaonal buttons like I got with Razer Naga
-
I got speedlink parthica keyboard.
Keyboard has 5 macro buttons (M1 - M5). I always thought that in game when I change commands to that buttons it will be displayed to key M1 but everytime I changed button to this in game it always switches to ctrl.
In keyboard software setting to one of macro button looks like this:
So if I understood these button are not independent? It just mimic other buttons?
-
They are is same pri range +-5% but seems that TP-LINK TL-WN821N is newer model but doesn`t have antenna like TP-LINK TL-WN722N.
WN 821N also has 300mbp while WN722N has 150mbp. So which one is better, stable?
Some other to consider:
TL-WN823N
Asus USB-N10 NANO
Asus USB-N13
D-link DWA-127
-
I was thinking to install in browser Adguard (Ublock origin) + Privacy badger + Something for WebRTC like or HTTPS Everywhere
I see that there is now malwarebytes addon. Is it good? What about Avast online security, Avira browser safety or Bitdefender trafic light browser addon?
Any other?
-
Hello, I have Sandisk Ultra USB 3.0 Red stick but suddenly I got a message that my USB is write protected. I tried some solution like command prompt (disk part), Mini tool program, format in safe mode and Linux, EaseUS program but none of them can format usb stick. Is there solution to remove write protection?
-
anyone?
-
I connected my PC with my new Samsung 58" TV (VA panel). In Nvidia control panel I have options:
Full RGB
Limited RGB
Ycbcr 4:4:4
Ycbcr 4:2:2
Ycbcr 4:2:0
Which one of this is better? Also what bpc to select (I have option 8 and 10)?
Is it best to put TV to 4k 30hz or 24hz? Aren`t movie filmed in 24fps?
On Samsung TV I have option UHD color, should I turn that constantly on? There is also option Game mode. Activate that only when playing games?
-
2 hours ago, homeap5 said:
No way! Find program that can restore deleted partitions, not files!
I found few tools for that in few seconds using google:
https://www.easeus.com/partition-recovery/index.htm
https://www.cgsecurity.org/wiki/TestDisk
Try some of them or find better.
Thank you, I will try that!!!
-
4 hours ago, homeap5 said:
Look for some programs to restore deleted partitions. I cannot recommend any specific one, but in this case download and check is the only option.
My college from work can give me GetDataBack program. I think I read somewhere when you restore deleted files that it must be on another partition and not on restoring partition. Problem is that my friend only have active now C partition that is 80GB. So is it wise to first create simple volume on that D partition (probably quick format) and restore files directly on that partition?
-
My friend has strange problem. When he turned on PC his D partition was missing, only C is visible (one hard drive). In disk management there is only C partition and D partition is represented as 518Gb free space. I can only select New simple volume option. System restore is not possible because it was turned off. Is there a way to revive that partition and restore data from her?
-
-
I am planning to buy Magnetic Cable Organizer:
Can magnet that will come around cable interfere with cable normal work? I will use usb cable and audio extension cable for this.
-
37 minutes ago, Origami Cactus said:
You now need an API key to use google maps on your site.
is that free? How to get it?
-
I am running apartment for rent and I have my own webpage in wordpress. Is there a way that I can get a link for google reviews of my place? I have on my page part where google map is shown so that is easy to get to my location, everything worked fine but after some time it shows some letters for "development purposes only". With that sing I can use google street on that map. Any way to change these things?
-
On 3/20/2019 at 1:31 AM, RedArrow said:
Hi Ringo,
It's good to see I'm not alone with this problem! I have a MXQ Box and had pretty much the same exact issue as you are currently having (Although you posted this on the 2nd, so maybe you solved it?)
My MXQ Box had sound no problems yesterday, then this morning tried to watch some Sky1 channel and no sound.
Checked the Audio on the Skybox and no issues, it plays audio as it should. Then I switch the the MXQ Box and I hear the 'clicks' when navigating however, when trying to play any streams despite the App I use all have no audio what so ever.
So if you are anyone else reading this, has a solution or some other trouble shooting steps, it would be very appreciated.
-RedArrow
I deleted MX player and installed VLC player and after that everything works fine now.
-
I will buy card reader with 20pin connector. To connect that I need PCI-E Expansion Card PCI-E USB 3.0 HUB Controller Adapter. Mostly these adapter comes with 19pin connecttion. Does this adapter must have 20pin connector?
Card reader
https://www.axagon.eu/en/produkty/cri-s3
PCI card 19pin
or I can buy some like this 20pin card but I ma worried bacause it doesn`t say that it support win 10?
7zip - There are some data after the end of payload data
in Programs, Apps and Websites
Posted
I got this message couple of times. What does it mean? Googling tell me that is old 7zip problem.