Jump to content

menyus420

Member
 View Profile  See their activity

  • Posts

    66

  • Joined

  • Last visited

 Content Type 

Everything posted by menyus420

  1. menyus420
    This should be live now but i can't find any stream
  2. menyus420
    It would recommend to use the nvidia encoder to steream. The 20 series came a long way in quality and performance.
  3. menyus420
    So i tried to record it but the nvidia shadowplay record does not capture it, i think thats because the noise sits on the analog side of the back jack connection (makes sense to me). Tomorrow i will try to plug a speaker to it and record with my phone.
  4. menyus420
    Thanks for the answers! The noise filter jack extension would be an okay price, but i wouldnt want want to shill out more for the solution. But the other interesting thing is, i plugged the headphones into the front panel jack, and i can not hear the noise at all. Strange. It is bit inconvinient and a bit ugly but i think i will use that.
  5. menyus420
    Hi My GPU coil whine is audible trough the 3.5mm audio jack when there is high load on the GPU, and got worse over time. Does someone know any solution to this? Is this because a super noisy graphics card or bad audio circuit design on the motherboard? Would a discrete sound card solve the issue? Thanks, Ryzen 5 3600 Gigabyte B450 AORUS ELITE (rev. 1.0) 4x8 GB Corsair DDR4 3333 MHz CL16 Asus Cerberus 1070 ti
  6. menyus420
    Stock current limit is 114 A, but the fets are 70A each, but i wouldn't run them anywhere near that limit.
  7. menyus420
    I dont think thats true. The board can handle the CPU very well for overclocking, the 3600 that is bad for binning and clocks. Thats a lower tear product. I can push mine easily to 4250 MHz all core with this board. The 3600 is a terrible overclocker. I did some digging, gamers nexus gives a great explanation for PBO and auto overclocking: On the other hand, i found an other setting for socket power that actuall works in the bios. PBO is only for raising power and current maximums, Auto Overclocking would raise your boost clocks. But in my case none of them helped. I guess ryzen boost clocks are more dependent on temperature, like GPU-s. I enabled auto OC and there is no power limit any more, but these did not raise my clocks....
  8. menyus420
    The power limit seems to be stuck even if i dont open ryzen master after reboot. Checked it with HWinfo
  9. menyus420
    Hi! I turn on PBO for manual setting is the bios with 200 offset and custom power and current limits, the bios saves, but these wont get applyed when booting into windows. PPT TDC EDC wont change from stock. I check it with ryzen master and the values are the stock values. The CPU only does 3950 MHz with CinabenchR15 at 1.37 V (79°C) and ryzen master indicates power limit at ~80W. If i enable maual overclocking it overrides the power and voltage limits. The CPU can easily do 4200 MHz at 1.37 V (84°C) with only ~95W. The CPU is far from the stock current limits. My goal was to raise the max clocks, but keep the dinamic IDLE clocks and voltages. I think that the only thing limiting the CPU to boost is the power limit. The manual setting has to be set after every reboot and i dont want to lock the voltage, thats why i wanted to use the PBO override PPT. Thanks for your time. Rig: Ryzen 5 3600 Gigabyte B450 AORUS ELITE (rev. 1.0) (bios version: F50) 4x8 GB Corsair Vengeance 3333 MHz CL16 ASUS Cerberus 1070 ti Be quiet! PURE ROCK CPU cooler 1000W PSU
  10. menyus420
    Anyone reading this in the future: I declared the motherboard dead. Bought a Gigabyte B450 Aorus Elite, works like charm with the 2200G and now with a 3600.
  11. menyus420
    Hi! My ASUS X370 Prime Pro wont boot after bios update. Here is the long story: I tried to update the bios to the latest version. When the bios update completed, the system rebooted, but it did not boot into bios ever again. I found a guy in the local crags list who writes bios chips and he succesfully updated the bios chip to the latest version: 5008. He even read back the bios content and everything was okay, but the board still does not boot. I have a speaker installed, but it does not beep. The board powers up, the RGB wire lites up, CPU and GPU fans spin up but there is no post. The 2200G and the ram works in an MSI B450i (friend brought over). What i tried: -2 different ram kits, swap them around -Power on without ram -2 different PSUs (i know they work), bot 4 and 8 pin CPU headers -On board HDMi, Display Port video outs -HDMI, VGA, DVI from a HD6770 that i had on the shelf -Cry myself to sleep -Cmos reset with the headers -Disconnect every cable expect from the power cables -Cleaned sockets with compressed air -Reseated CPU like 3-4 times There is no sign of any physical damage or short circuit. Thanks for your time!
  12. menyus420
    A really helpful gentleman at overclock.net on a thread about this mobo gave me the answer: https://www.overclock.net/forum/11-amd-motherboards/1626011-my-experience-asus-prime-x370-pro-931.html#post28028644 Thanks to him!
  13. menyus420
    Hi! Does anyone know what this header is wired to on the Asus X370 Prime Pro? It is misteriously close to the bios chip. I can not find any documentation of it in the manuals. My buddy bricked the mobo during bios flashing and it does not post any more.I tried the cmos clear and all other options. I found a way to flash the bios with my raspberry pi 2 via the SPI interface, but i do not want to solder the chip. If that header is wired to it than i could use it to update the bios image. I already ordered an IC clamp for the chip, but it takes 3 weeks for it to arrive from china Thanks for your time!
  14. menyus420
    My friend already took the PC home with him, i dont have it any more, but CPUZ and HWINFO64 reported 3200 MHz boost clocks (that i trust).
  15. menyus420
    My buddy bought a used mobo with a i5-2400 and 8GB of ram, but i was suprised it is the i5-2400 6 GHz special edition. I know its just a windows bug, but i was laughing so hard when i first saw it i tought i share it with you guys
  16. menyus420
    Hi! I recently purchased an ASUS Cerberus 1070 ti, and was playing around with overclocking. With Unigine Valley, i stopped the camera in the forest, and noticed that i incresed fps from 81 to 90 just with a +415 MHz offset on the memory. But! My consern is that there is no direct contact cooling for the GDDR5 memory modules in this card (on my Gigabyte 1060 it had). But the coolers fin stack is open above the memory modules, so i think there is airflow over them. I cant measure the temperatures of the memory moduels, and wondering is it safe to run the memory overclocked, because the higher temperature may cause faster degradation in them. (i already set a custom frequency voltage curve with stable 1949 MHz core clock on 992mV, droping to around 85-90% TDP) Thanks for your time!
  17. menyus420
    So we tried carcassonne at christmas, and it was a lot of fun with my brothers and friends. Also i got two packs of french cards for smaller card games
  18. menyus420
    thanks! i check them out
  19. menyus420
    Hi! Recently me and my friends started to explore boardgames (so we dont just drink and talk), and i am looking for not so difficult and fun games. I would prefer easy to learn, but fun games, because lot of the time, someone new comes, and it is always suffering to teach one person the rules for a game that takes 30 minutes and 3-4 rounds to understand. Its not a problem if it requires to buy a kit or game, just keep in mind i live in the EU. I didnt find a better subforum for the question, but if you can tell me where, i pos it there. Thanks!
  20. menyus420
    If you are not dependent on OS X software, and not afraid of linux you can also try lubuntu. It is just as easy to install as ubuntu, and has a really low overhead. https://lubuntu.net/
  21. menyus420
    My workhorse is folding when i'm not using it for programming, the latop is folding 24/7
  22. menyus420
    Dude u have a guest pc? thats lit! My girlfriend would not allow me to keep an other pc around, just in case Respect!
  23. menyus420
    Hi! I have a Gigabyte 1060 and it was doing a buzzing sound, that is caused by vibration of the plastic shroud if the fanspeed is int the 75-80% range. It is not coil whine, because the buzzing apperas with no load, just setting the fan speeds manually. First i thought that it is the fans vibrating, i put padding under them, no change. After that i figurd it might be the back and front plate hittin each other, and i think it was that. I took off the front, and put some cellux tape on the plastic that migth contact. If the buzzing is still audable, try maybe put something rubberry, thicker tape, like this. And try to put padding under the fans also. Sorry for the bad pictures, i did not plan to make a guide when i did the mod. Here is where you put the tape: it looks a bit ghetto, but hey, if it works To remove the front plate, just undo the screws on both sides (4 in total), and dont forget that the fans are still connected, but the taping can be done without disconnecting the fans I hope this will be helpful to someone
  24. menyus420
    Hi! My friend is building a budget gaming pc, and we setteled for an i5-8400 and a used graphics card. For budget options the best bets are the GTX 970 and GTX 1060 3GB on the used market in my country, both going for around 190-215$. New 1060 3gb is 300$, others are much more expensive. I know that the 1060 3GB is slightly more powerfull, but the vram is less. I am also conserned about the miner 1060-s, because it was really popular for mining here. He will mostly play PUBG, GTA 5, CS GO. Pros and Cons appreciated. Thanks! The system: Gigabyte B360M H i5-8400 2x4GB gskill DDR4 2666 MHz 256 GB SSD + 1 TB HDD EVGA 500 B1
  25. menyus420
    Hi! Is there any way to check a graphics cards manufacturing date or the date of first use? I see a lot of cheap 1070-s in my area that was miner cards and are selling 30-35% lower than new price, and say that were only used for 3 monts of mining. If its true, that would be a good deal in my opinion. But here is the catch: the guy promisses 1 month warranty and says that the card has warranty, but has no paper for it. And thats where i feel that he is lieing about that 3 month mining usage. The warranty paper would show the real warranty status and the mining time (probably was bougth new for mining). Is there any way to check on that by product number or something?
×