Belzebuth

If Adobe CC is working on this ARM like it is on x86, man it will be a great product. It could even make me switch to mac...

I will probs make a topic on it when I get it! 

Good buy ! On paper the perf/value ratio is very high ! 

If Adobe CC is working on this ARM like it is on x86, man it will be a great product. It could even make me switch to mac...

YES! I found the solution, I had to right click just a little further to the right from where I did in the Disk Manager ^^
 
When clicking in the big area where it said it was unallocated I had the option to give it a drive letter thus allocating it and now it's available for use again

A typical server, in a business environment, handles hundreds of requests at the same time from systems all over the network. That's why

my question is how? usually the system is off when you're installing / removing components .... so just how?

Run it on 443 port like SSL, if it's still not working look for advanced hiding technique ... tunneling trough TOR or things like that...

Disconnect the disk you should be able to boot into the bios. If your windows data are corrupted then you need to reinstall windows

Yep sorry, I misread.
 
So even if you don't boot out of your HDD, if it's still pluged in, you can't boot ?

Is your 970 powered by 2 pcie power connector as  it should be ?

Yes that would happen if you connected the servo to the 5v rail on the Arduino when it's powered from 9v.
You need to plug the servo board into the 5V pack and and arduino into the 5V pack also.
Believe me these guys are over engineering the situation a bit. I have made many arduino projects and I am 2 years into an electrical engineering degree.

They will activate windows just fine, but it's grey market, so illegal because it doesn't fit the CGU of Microsoft

It could be a driver issue, if you can find the right driver it should work. Or you can go with a ps2 to usb adapter wich usually doesn't require driver

You could buy second hand DDR4, it's the only "cheap" way

For low noise and clean design at low price  : Nanoxia Deep Silence 4
Low noise aluminum build high end : Lian-Li PCA04B or Lian-Li M25B but more expensive
 

Does a TA Dario 286 keyboard fit the old and retro requirement ? I have the computer and the screen somewhere on storage but I need to dig a little...

Does a TA Dario 286 keyboard fit the old and retro requirement ? I have the computer and the screen somewhere on storage but I need to dig a little...

What is your laptop ? Brand, Model, ...
You may need to install a whole lot of drivers from the manufacturer support website.

Check what i said before.
And keep in mind that every mic have a noise level, sometimes it's very low sometimes not, static mic like the AT2020 have more noise than dynamic mic, plus the amp (48v) can cause ground loop too...

You won't see any real difference i mean 8ms is fast, and you wont see anything  between 8 and 1. You may see something with 15+ms screen, but most people just don't.

Definetly a PUP, you may have installed it without knowing, try Malwarebytes to remove it

Definetly a PUP, you may have installed it without knowing, try Malwarebytes to remove it

Definetly a PUP, you may have installed it without knowing, try Malwarebytes to remove it

Definetly a PUP, you may have installed it without knowing, try Malwarebytes to remove it