ianspy1

Hello, I have a pi4 with a 7" touch screen and a second HDMI monitor pluged in. I want to open up a website in "kiosk" mode on the touchscreen. Which works if I unplug the HDMI monitor. I´ ve tried using "--display=:0". This just brakes the entire thing and nothing launches. Setting the touch screen as my primary display also dosnt do anything. Is there a way to specify which monitor to use in the autostart file ?

I in my time as an apprentice had to get one of HP´s thunderbolt cards working... And honsetly ? its really wasnt good and we ended up having to replace the system/motherboard. The drivers where just a mess and compatibility was a pain.

So I use a "Earstudio ES100" daily for my IEM´s. So far my setup has been, audio relay from PC to phone to ES100. Which adds latency and other issues. So I am looking for a bluetooth card that can handle 8h a day and bluetooth 5.0 for sub 20€. Dont know if its possible. I hope so. Also I have heard that PCIE and M.2 are more realiable then USB. I have free slots for both so any suggestions fire away :D

Hey every one I am still very new into audio so please excuse some "obvious" mistakes in my thinking xD. So I recently discovered that I like the feeling of wearing iem´s more then I do over ear headphones. With mine now dying (some focusrite AKG clones at my desktop with a focusrite 2i2 2nd gen. As well as my soundsport free´s.) I am looking to get a pair that fits both needs. Gaming and using guitar amps at my pc as well as having some form of bluetooth connection on the go. (preferably a bluetooth neck band but I am looking into small clip on amps and a short cable as well). For about 130€ ish all together. I mostly listen to Hard Rock, Metal, Rap and some synth stuff Considering all of this A. can it be done on this kind of a budget ? B. Considering I am going to wear them a lot is a 2 pin connection better then a mmcx ? C. Give me some recommendations I have been digging into all of this and am still a bit overwhelmed by the options. any help is appreciated

as far as my knowledge goes I see nothing odd any chance you have a confirmed working git clone that I could try? I even tried reflashing the sd card again

The thing is when I am in /home/pi and do a git clone that git clone also dosnt apear there

Hello I have set up a pi zero W with raspbian for a project. When I cloned a git that I need for this project I noticed that /home/pi is empty. Shouldnt there be like a Video and Download folder at least? I tried "ls -la" too of course and it gives me the following output: total 24 drwxr-xr-x 3 pi pi 4096 Mar 4 23:05 . drwxr-xr-x 3 root root 4096 Mar 4 22:47 .. -rw-r--r-- 1 pi pi 220 Mar 4 22:47 .bash_logout -rw-r--r-- 1 pi pi 3523 Mar 4 22:47 .bashrc drwx------ 3 pi pi 4096 Mar 4 23:05 .gnupg -rw-r--r-- 1 pi pi 807 Mar 4 22:47 .profile Any help?

Thank you again

Thx

Hi it's a bit weird I have this issue when I play recroom for example I constantly hit 55fps no matter the settings I settled on medium since low is even more laggy ? Is this a hidden setting somewhere? Or is this normal ? Oh and my specs are: Ryzen 7 3700x RX 5700 XT 16gb 3200mhz My headset is a Rift S

Hi I am really struggeling here ... Everytime I try to flash system it ends with writing 'system_b' 2/3... FAILED (remote: Operation not permitted) my bootloader is unlocked and I am in fastbootd. I so far tried: - other USB cables - other ROM´s - factory wiping - flashing stock image again (which does work in both fastboot and fastbootd) - reflashing recovery with stock one - relocking and unlocking - booting in to fastbootd via command and buttons - diffrent minimal adb and fastboot versions anyone have any ideas what I am doing wrong?

Let's say I have a bit to spend but only want to spend what is necessary... The other chip that comes to my mind would be a Ryzen 7 3700x?

Hi I am always running a Windows kvm on Debian for gaming and also some video editing... My GPU is a rx5700xt And my cpu is a i7 3770 I often feel Debian or Windows getting sluggish when I do something in parallel ( ar on separate drives) So I am wanting to upgrade... Would the threadripper 1920x make sense ore should I take something different.... And if possible give me like a "budget option " for maybe 300-400€ with Mainboard and a "nice to have pick"

Ok hw monitor says the same I am going to wait for Windows updates to complete but there all just security updates

Microsoft basic display adapter I am gonna try to run hw monitor

There's no GPU showing up and the CPU is a and Athlon II X2 255

Heyo it's running 8.1 pro

Hello I have found a old Fujitsu maschine which I want to get back up and running... The problem is I have no idea which graficscard this is all I know is that it has a and vision pro sticker on it....

big update I found this : pls tell me what he means by figuring out the second and third bite of the tag

Hi yes I have read out the ultralight chips that came with the lock ( screenshot comming) the id that is provided ( these weird 4 diget IDs I mentioned ) corospond with the position 3-7 with the uid. I am realativly new to this nfc stuff so forgive me if it is a stupid question but I wanted to use my implant ( a xm1 magic chip with backdor) to open the lock is there a way to clone an ultralight to this chip ? and regarding the secutrity of the lock its pretty good I wouldnt leave it out over night with it but it isnt supposed to. at night its in my cellar of a building and its just for my hopping in and out of a store stuf. The backplate is revited so no screwing it appart ( unless its unlocked there is a screw in the shakel hole for battery replacement ) its not shimmable becouse it uses halfmoons with a little servo.

I got a rfid implant and wanted to use it with a bike lock the only thing I found was a padlock.... soo I got a egee touch padlock with nfc and want to use my own nfc tag and this is what I found out : the ID is provided if you buy the tags frome THEM. These ID is also found in sector 0 / UID so for example 7abcd739 abcd is the manufacture provided ID so I thought what the hell lets try it but this UID "method" of using the 4 digets after the first 2 dosnt work .... I have been texting back and fourth with @ deviantollam on twitter btw great guy! and wanted to ask if you guys have an Idea reddit link :/https://www.reddit.com/r/NFC/comments/fiux4a/cloning_a_uid_with_a_twist/ best regard ianspy1

Im sorry maybe I have to tell you my job I work as a IT-Systemelktrician in a support companie for tv productions my job is to get the system up and running with the hardware installed but I am just not an expert in macs at all usually I work with the HP Z workstation lineup or with servers

The customer is an editor and has all his files on a server so that wont be an isue but I dont know if it reinstalls with the security patch

Its and mac pro and the gpu is the provided one

I wish it was a hackintosh :,(