Roadrunt

dinosaur

Hello, I'm looking to purchase a replacement/upgrade for my hyperX cloud 2, one of the earphones has stopped working. I'm not interested in getting anything extra, just something that i can plug in and use. Budget is 100-200 usd. I've looked into the the Audio-Technica ATH-m50X's wired/wireless versions and the Sennheiser 599's but was wondering if anyone else had any suggestions or if these headsets were good for gaming. I couldn't find a lot on how they perform for competitive gaming for footsteps or how well they perform surround sound wise for being shot at. Thanks

Hello, I'm currently able to purchase a Evga 3080 FTW ultra, however i've heard that 3080tis will be releasing within a few months. The main question is should i wait?

Hello, i was wondering what results people were seeing temperature wise for their 5600x with either PBO enabled or Disabled across different cooling solutions. I'm currently using the 280mm Artic liquid freezer(SK140 PHANTEK FANS (Running silent at 990RPM) and my temperatures are : PBO Disabled: Idle: 34c Avg Light load: 45c Avg Full load: 56c avg Pbo Enabled: idle: 40c; Light load: 60c Full load: 76c PC specs: CPU : AMD 5600x MOBO: TUF GAMING X570-PLUS (2802 Bios) Cooler : 280mm Artic Liquid AIO RAM : CORSAIR VENGEANCE RGB PRO 16GB (2x8) u/3600 (CMW16GX4M2D3600C18) GPU: GeForce RTX 2060 GAMING Z 6G PSU : 750w EVGA G2

Issue resolved.

Hello, i'm not receiving a reading from the 280mm artic liquid Cooler on either of the pump header or the CPU fan header. When attached to the pump header the VRM fan doesn't spin but it does when attached to the cpu_fan header. As its not outputting a signal, is there any other way to test whether or not the pump is running? I'm able to boot to windows and i'm currently sat at 34c on idle. PC specs: CPU : AMD 5600x MOBO: TUF GAMING X570-PLUS (2802 Bios) Cooler : 280mm Artic Liquid AIO RAM : CORSAIR VENGEANCE RGB PRO 16GB (2x8) u/3600 (CMW16GX4M2D3600C18) GPU: GeForce RTX 2060 GAMING Z 6G PSU : 750w EVGA G2

Without PBO

With PBO enabled.

Running CODCW, Satelite(1) and Moscow(2)

Added

As the title says, i'm getting low scores for cine bench r20 runs, the highest i've seen is 3888 multicore. Although my SC performance is on par with what i've seen on reviews. 594. Thermals are great, i don't exceed 55c on the artic liquid 280mm aio. Below i have posted an image of the cpu during a cinebench r20 run. Edit Specs - CPU : AMD 5600x MOBO: TUF GAMING X570-PLUS (2802 Bios) RAM : CORSAIR VENGEANCE RGB PRO 16GB (2x8) @3600 (CMW16GX4M2D3600C18) GPU: GeForce RTX 2060 GAMING Z 6G PSU : 750w EVGA G2

Before buying anything check whether or not you will have to turn in the items you bought to the company , in the event that you leave or when working from home ends.

Hello, i was wondering if anyone knew or could confirm how many SK140 fans i could run on a single header, the mobo has 3 chassis fan headers and i plan to have 3 sk140's and a single 120, along with the 3 stock fans that will come with the Galahad AIO. These will run off of the CPU fan header. Each of the headers are 1a 12w, and a single sk140 fan is 0.15A, is it safe to say i would be able to run 3 sk140 fans off of a single header if i wanted to along with the single 120? All of the fans mentioned are also ARGB which i plan to use and the motherboard only has a single 3A 5v ARGB header and i was curious if i would be able to run all of the fans argb off of that header. From what I've found out so far, the sk120 fans have 12 LEDS each and the galahad aio has 47 embedded LEDS , however it doesn't mention how many leds are included within each fan. The manual says that there is a maximum of 120 LEDS for the header, and with the information so far that would be 95 LEDS, not including the galahad fans. Thanks.

Consider looking at the p500a if u can extend ur budget slightly.

I currently have the X570 gaming plus and i'm able to control the limited RGB available on the board through the ICUE corsair software, however i was wondering if i were to buy some fans that weren't corsair, would i also be able to control them through the motherboard on the icue software (they would sync to whatever the motherboard is doing) or would i have to go into the bios itself, or use the manufacturers software for the fans. Thanks.

Hello, i was wondering if anyone had the fans mentioned in the title from Phanteks. I noticed they were a cheaper alternative for fans with both RBG and PWM control, however with them being new there currently aren't any reviews covering them. Anyone information is appreciated.

What would be the best memory configuration, 8x4 3600 or 16x2 3600. I currently have 8x2 sticks however i was wondering if there would be any downsides to 8x4 over 16x2. I'm aware that quad channel is not supported. edit: not supported *

Hello, i'm looking for suggestions for a Mid-range 1080p IPS Panel with thin Bezels, this is to be used as a second monitor so visuals are the main priority. Thanks.

Hello, i'm looking to get a new office/gaming chair and was wondering if anyone had any suggestions. My budget is between £100-250 and I'm not looking to buy a used or refurbished chair. Preferably the chair should be mesh but i'm open to all suggestions. Thanks.

Hello, i'm currently looking at getting the Asus Tuf Gaming x570-plus which will be paired with a 3700x. However, before i finally decide i was wondering if anyone has any recommendations for other x570 boards, or if anyone has had this board and their experience so far. Thanks.

Update 4: Assuming either my MOBO or CPU is dead. Today the PC black screened and everything went silent, although the MOBO lights were still on, and no error code was present. I have moved my storage, GPU and PSU into an older PC and everything seems to be working fine currently, so i'm assuming those components aren't the issue.

I'm able to control both monitors separately (when they're both plugged in) and select the refresh rate for that specific monitor without it interfering with the other. I will post a picture once the other monitor is plugged back to show you.

Try changing the input source on your monitor.