pjlullo
-
Posts
9 -
Joined
-
Last visited
pjlullo's Achievements
-
If I was to do this and the DMZ worked, any idea what this could mean? Surely there would be a way around it.
-
I am using a Arris Surfboard 6183
-
Router: Asus RT-AC66u ISP: Comcast I have been struggling to make my NAT type open. I achieved this a few weeks ago, but since then, it reverted back to strict. Additionally as of now, I was able to make it moderate. Steps I have take so far are listed below: Assigned Static IP to desktop Port Forward 3074 both, 88, udp, 53 both, 80 tcp, 500 udp, 3544 udp, 4500 udp, and 52907 udp (will explain this port later) Ensured Teredo is enabled Reset Teredo Manually assigned port to Teredo ie the 52907 from above Disabled SIG ALG Ensured UPnP is enabled I am now stuck. I have done everything but create a DMZ - something I do not really want to do. Any suggestions?
-
Ah okay. Damn I do not have any thermal paste laying around.
-
Kraken x62. Isn't there a 20 degree offset?
-
I took the cooler off, and I could tell by the thermal paste that it was not tight on one side. I have reattached it took a screw driver to the thumb screws. Temps are now sitting at 61 Celsius in bios. Thanks.
- 10 replies
-
- 1
-
-
- ryzen
- temperature
- (and 1 more)
-
Hi, Just built my Ryzen system. In the bios right now, it says my CPU temperature is 94 degrees... What could be causing this? Mobo: Asus Crosshair VI hero CPU: 1800x GPU: 1080ti FTW3 RAM: G Skill Trident Z RGB 3200 PSU: 750 G2 Water Cooler: Kraken x62
-
Hi, Just built my Ryzen system. Specs: Mobo: Asus Crosshair VI hero CPU: 1800x GPU: 1080ti FTW3 RAM: G Skill Trident Z RGB 3200 PSU: 750 G2 Problem: On board LED is lighting up orange. I believe that is signaling something is wrong with the RAM. CPU light is green. I checked the manual and have the 2x8gb sticks setup as specified in A2 and B2 slots. I read the QVL and trident z was listed as supported. Any suggestions on what to do? EDIT: Getting no beeps either
-
Hey so I am building a new pc, but I really do not know much about audio setup. I have not bought the amp yet* Amp: Magni 2 or Magni 2 Uber (which ever one is easier) Mixer: Behringer 1204 (If I can go smaller, I will) I am trying to this up so I can switch seamlessly between my pc and ps4 for audio and mic usage. I do not mind if my pc has to be on or something for this to work, but I have no clue where to even begin. Anyone know how to do this?
