Oskarw90

Hi guys!

This is a build log about a build i started about two months ago.
The goal with the build is to create a clean looking computer for both gaming and 3D graphics which im currently studying.
This build will go in the color scheme, Green, White, Black.
Featuring a Plastidipped motherboard, watercooling using rigid acrylic tubing, sleeved PSU and a delided processor.
Check Pictures for more information.
 
Components:
MSI GTX 780
Intel i7 4770k Delid
Gigabyte G1. Sniper m5
Corsair Dominator Platinum
White Fractal Design 630W PSU
Fractal design  Define R4 White
I will be watercooling using two 280mm radiators
 
To Do List:
Sleeving the PSU (DONE)
Plasti-dip motherboard (DONE)
Choose watercooling parts (DONE)
Install watercooling (DONE)
Create custom Chassi mod (DONE)
Delid Processor  (DONE)
Sponsors:



 
Corsair is sponsoring this build with Two neutron GTX 120Gb SSD Drives,
Dominator Platinum RAM and all around of their awesome AF 140mm Fans.
Aquatuning is sponsoring this build with a Alphacool 280mm radiator
 
Sleeva.se provided the sleeving for this build

Apperance Goals:
I am going for a really clean look, with a White motherboard and with bent acrylic tubing with lime green coolant.
Cables will be kept to a minimum and will as much as possible be hid behind my motherboardtray.
HDDs will be mounted behind the motherboardplate, which i got a mod for.
The Neutron SSDs will be mounted visible in the chassi.
I am using a cylindrical reservoir, which also will be mounted visible


Updates:

I finally Finished my project!
The sleeving was harder to get straight then what i thought! since my Sataports are filled up there are almost no room for a clean run
But i'll let the images speak for themself!

Big Thanks to Corsair, Sleeva.se and Aquatuning for their support in this Project! you made it Awesome!













Thanks again! Now it's time to start planning for my next project which i hope will be finished by Dreamhack Summer 2014! it will be a VERY special one, so stay tuned!


Best Regards
Oskar Wallin

Hi guys!

This is a build log about a build i started about two months ago.
The goal with the build is to create a clean looking computer for both gaming and 3D graphics which im currently studying.
This build will go in the color scheme, Green, White, Black.
Featuring a Plastidipped motherboard, watercooling using rigid acrylic tubing, sleeved PSU and a delided processor.
Check Pictures for more information.
 
Components:
MSI GTX 780
Intel i7 4770k Delid
Gigabyte G1. Sniper m5
Corsair Dominator Platinum
White Fractal Design 630W PSU
Fractal design  Define R4 White
I will be watercooling using two 280mm radiators
 
To Do List:
Sleeving the PSU (DONE)
Plasti-dip motherboard (DONE)
Choose watercooling parts (DONE)
Install watercooling (DONE)
Create custom Chassi mod (DONE)
Delid Processor  (DONE)
Sponsors:



 
Corsair is sponsoring this build with Two neutron GTX 120Gb SSD Drives,
Dominator Platinum RAM and all around of their awesome AF 140mm Fans.
Aquatuning is sponsoring this build with a Alphacool 280mm radiator
 
Sleeva.se provided the sleeving for this build

Apperance Goals:
I am going for a really clean look, with a White motherboard and with bent acrylic tubing with lime green coolant.
Cables will be kept to a minimum and will as much as possible be hid behind my motherboardtray.
HDDs will be mounted behind the motherboardplate, which i got a mod for.
The Neutron SSDs will be mounted visible in the chassi.
I am using a cylindrical reservoir, which also will be mounted visible


Updates:

I finally Finished my project!
The sleeving was harder to get straight then what i thought! since my Sataports are filled up there are almost no room for a clean run
But i'll let the images speak for themself!

Big Thanks to Corsair, Sleeva.se and Aquatuning for their support in this Project! you made it Awesome!













Thanks again! Now it's time to start planning for my next project which i hope will be finished by Dreamhack Summer 2014! it will be a VERY special one, so stay tuned!


Best Regards
Oskar Wallin

*left speechless*

Hi guys!

This is a build log about a build i started about two months ago.
The goal with the build is to create a clean looking computer for both gaming and 3D graphics which im currently studying.
This build will go in the color scheme, Green, White, Black.
Featuring a Plastidipped motherboard, watercooling using rigid acrylic tubing, sleeved PSU and a delided processor.
Check Pictures for more information.
 
Components:
MSI GTX 780
Intel i7 4770k Delid
Gigabyte G1. Sniper m5
Corsair Dominator Platinum
White Fractal Design 630W PSU
Fractal design  Define R4 White
I will be watercooling using two 280mm radiators
 
To Do List:
Sleeving the PSU (DONE)
Plasti-dip motherboard (DONE)
Choose watercooling parts (DONE)
Install watercooling (DONE)
Create custom Chassi mod (DONE)
Delid Processor  (DONE)
Sponsors:



 
Corsair is sponsoring this build with Two neutron GTX 120Gb SSD Drives,
Dominator Platinum RAM and all around of their awesome AF 140mm Fans.
Aquatuning is sponsoring this build with a Alphacool 280mm radiator
 
Sleeva.se provided the sleeving for this build

Apperance Goals:
I am going for a really clean look, with a White motherboard and with bent acrylic tubing with lime green coolant.
Cables will be kept to a minimum and will as much as possible be hid behind my motherboardtray.
HDDs will be mounted behind the motherboardplate, which i got a mod for.
The Neutron SSDs will be mounted visible in the chassi.
I am using a cylindrical reservoir, which also will be mounted visible


Updates:

I finally Finished my project!
The sleeving was harder to get straight then what i thought! since my Sataports are filled up there are almost no room for a clean run
But i'll let the images speak for themself!

Big Thanks to Corsair, Sleeva.se and Aquatuning for their support in this Project! you made it Awesome!













Thanks again! Now it's time to start planning for my next project which i hope will be finished by Dreamhack Summer 2014! it will be a VERY special one, so stay tuned!


Best Regards
Oskar Wallin

Hi guys!

This is a build log about a build i started about two months ago.
The goal with the build is to create a clean looking computer for both gaming and 3D graphics which im currently studying.
This build will go in the color scheme, Green, White, Black.
Featuring a Plastidipped motherboard, watercooling using rigid acrylic tubing, sleeved PSU and a delided processor.
Check Pictures for more information.
 
Components:
MSI GTX 780
Intel i7 4770k Delid
Gigabyte G1. Sniper m5
Corsair Dominator Platinum
White Fractal Design 630W PSU
Fractal design  Define R4 White
I will be watercooling using two 280mm radiators
 
To Do List:
Sleeving the PSU (DONE)
Plasti-dip motherboard (DONE)
Choose watercooling parts (DONE)
Install watercooling (DONE)
Create custom Chassi mod (DONE)
Delid Processor  (DONE)
Sponsors:



 
Corsair is sponsoring this build with Two neutron GTX 120Gb SSD Drives,
Dominator Platinum RAM and all around of their awesome AF 140mm Fans.
Aquatuning is sponsoring this build with a Alphacool 280mm radiator
 
Sleeva.se provided the sleeving for this build

Apperance Goals:
I am going for a really clean look, with a White motherboard and with bent acrylic tubing with lime green coolant.
Cables will be kept to a minimum and will as much as possible be hid behind my motherboardtray.
HDDs will be mounted behind the motherboardplate, which i got a mod for.
The Neutron SSDs will be mounted visible in the chassi.
I am using a cylindrical reservoir, which also will be mounted visible


Updates:

I finally Finished my project!
The sleeving was harder to get straight then what i thought! since my Sataports are filled up there are almost no room for a clean run
But i'll let the images speak for themself!

Big Thanks to Corsair, Sleeva.se and Aquatuning for their support in this Project! you made it Awesome!













Thanks again! Now it's time to start planning for my next project which i hope will be finished by Dreamhack Summer 2014! it will be a VERY special one, so stay tuned!


Best Regards
Oskar Wallin

I finally Finished my project!
The sleeving was harder to get straight then what i thought! since my Sataports are filled up there are almost no room for a clean run
But i'll let the images speak for themself!
Big Thanks to Corsair, Sleeva.se and Aquatuning for their support in this Project! you made it Awesome!










Thanks again! Now it's time to start planning for my next project which i hope will be finished by Dreamhack Summer 2014! it will be a VERY special one, so stay tuned!

beautiful, i once thought about painting my board but didn't know what paint to use. Already gonna plan on my next build 3 years from now

Never knew you could PAINT the PCB I thought it was the heat sinks and shields blah blah blah but NO 

dat mutherbord so sexy

very nice! I painted an old mobo a long time ago and it worked just fine. 
 
I have done blue, red, and orange builds... still want to do a green.

Uhhh.. AWSOME!!  :lol:

Wow looks awesome!

What kind of tubing did you use for this?

I know it's not a hole lot but I like your tubing.
Can't wait for water-cooled GPU!

Sweet!! Those green water filled hardtubes looks like candy  . It's just a bit unfortunate that the green on the motherboard and the sleevings doesn't exactly match its colour but I think that can be 'remedied' with a splash of green leds. Don't flood the whole case with green leds because it'll mask out those wonderfully covered white motherboard.

That tubing! That looks awesome. I like the fans and cables too.

Clean and amazing. Cookies for you sir!

Whats white lighting are you using? Is i just from the fans or do you have an LED strip. Fantastic build and photos

Love it, just love it.

That green backlight is driving me freaking wild.
 
I think I need to do something like that.  Is it an LED strip ?

Utterly loving this. Great color coordination, very clean execution. I'm
not usually a big fan of fans mounted outside the case on top, but I can
appreciate the form < function approach here, plus they're nice fans.
So:

Hello!
After finishing my last build, "Project White" i've decided to do something of my own again.
Last time i modded a R4 despite the convenience of having a ready made platform to start from, i wanted to build from scratch.
This build is in it's VERY early planning stages and im right now modeling it in 3d Software.
What i can tell you so far:
Scratch Chassi Build Watercooled Lightning fast The color scheme is not decided yet, so the teaser im posting here is a definite work in progress!  
Give me input!
Im thinking i might go for a round buttonbase, instead of the octagonal base.
I'd love to hear your Ideas! Keep stopping by and i'll keep posting updates
 

I finally Finished my project!
The sleeving was harder to get straight then what i thought! since my Sataports are filled up there are almost no room for a clean run
But i'll let the images speak for themself!
Big Thanks to Corsair, Sleeva.se and Aquatuning for their support in this Project! you made it Awesome!










Thanks again! Now it's time to start planning for my next project which i hope will be finished by Dreamhack Summer 2014! it will be a VERY special one, so stay tuned!

Thanks!
The UPS elf came with lovely presents from the Corsair Santa this morning!







I benched them using Aida64 and im getting ~30.000MB/s read/write/copy
I must say, this is the first Dominator Platinums i've had and oh lord do they feel good! You could feel the quality!
Thank you Corsair! Thanks to you two guys for making it possible! (you know who you are )

Updates and picture heavy parts: