bcguru9384

PUP PUA
pontentialy unwanted program/app
add exemption or change antivirus
 

Signed = that bit or byte value can be positive or negative.
So a 2 bit signed value can be -1 to 1, an 2 bit unsigned value would be 0-3. The first bit will be used to declare positive or negative.
-1 would be 1 1 and 1 would be 0 1
 
Unsigned = 0 - whatever the length is.
 
Floating point =  Same as signed where some bits will be used to decide for the exponent (where the comma goes)
 
When you use any of these you need to take the lenght into account. Because for example an 8bit (1byte) value can go to 255 the signed 8bit goes to 127.
You however have the same range. Unsigned its 0-255, signed -127 to 127
 
Its very simple and there are many sources to use for this stuff  

unless i'm mistaken the UWP app allows Netflix to make 1 app that works on both Windows 10 and Xbox One consoles which means less app development costs and fewer apps to maintain, which is a good thing in my book.

If the person was smart, they would just factory reset the router and then it would not have the same SSID or passcode, as that stuff can be changed easily. All you can do is call the police and file a report. 

oh you kiddos have it easy
back in my day we took the xmas tree lights and hooked those to our 3 way speakers
flash to that channels music note
if you had subwoofers and time you would splice sub to yellow lights, low of 3 way to red, mid to green, high to blue(our xmas lights were only 4 colors)
then play favorite tunes and watch the light show

what antivirus are you using?
whats the total running processes and mem load %?

i think m.2 requires a minimum of 2 pciex1 lanes
sata needs only 1 pciex1 lane
if laptop has only 2 sata type lanes available it may drop hdd
i would assume the optical drive and usb ports are run from a sata 3&4 with ram either direct cpu or sata0 port

why do you need a vpn for these activities?

goto satbox
menu then find tv modulation
note chan# and mode used(air/cable)
get old vcr and hook coax to input and tune vcr to sat tv chan
hook vcr to tv via redwhiteyellow rca plugs

your welcome
its a topic that only has individual best results as everyone sees and interprets light similarly yet differently
i use 32" 1080p tv and feel its little big for gaming(single player and about 6feet(2m)away)but its great for tv shows and movies(dishvip222k and xbox1s ,,, sat goes thru xbox hdmi(allows upscaling))
but im also cheap ass sooo slow adopter of tv display upgrades but was an early adopter to dvi when it appeared.
cut a few pieces of cardboard to diaginal #inches and tape where your going to watch tv from
on card board tape the eye chart for testing eye sight(easy to say this row letters equiv 24pt font this row to 4pt)
this should give nice analogous test and cheap to(print a few pictures and try to match thru print settings the dpi quality of tv as well although 4k gotta be hard to match but 1080p type dpi should be doable)

@xdeathshot20
The EA6900 because you can install 3rd party software and have even more tweaking capability than the default firmware, i don't think the mesh one can have that done to it.

go into one of the devices lan adapters 
go to adapters properties
advanced properties
select crossover if adapter allows?
no crosscable needed

figure out which hole you desire most
ass both sexes have
mouth both have
now where it differs do you want to hold a penis or vagina
most of the sexually confused steer towards homosexuality due to the fact they feel more comfortable around same sex as themselves which is easily viewed as "i'm gay cause im more secure feeling around same sex than opposite sex"
no matter what choice is made make it due to what your heart says not from fear/uncomfortableness around opposite sex to yourself
sorry for quite vulgar worded start but it is the least confusing words i know that hopefully are not viewed with wrong intent
personally i do not care what choice anyone makes as it has zero effect on me 
your body your life your choice how to use both
irregardless of gay/straight relationships domestic issues always happen
best question to ask is will i be able to forgive my partner when fights happen or is it trully just a physical relationship?

laugh all you want but i can tell you all your system clockrates with only knowing baseclock and multiplyer
every clock for every system component....
can you?????

laugh all you want but i can tell you all your system clockrates with only knowing baseclock and multiplyer
every clock for every system component....
can you?????

yup
get a few wintv4 cards and windows media center
now get windows media center extender app and voila "multi"media server
you can also use windows media player network stream option
all these softwares depreciated in win10 but work with win7 great
this just built in windows options and theres a plethora of third party options
just pick something thats hdcp/drm compliant

The problem here is probably that your new install has the same username/device name as the old one. Am I right in thinking that your old Windows 7 machine was called "DESKTOP" and your account was "Steve", the same as your current one?
 
The confusion here is that Windows is showing you DESKTOP\Steve and you're assuming it's your current user account, when in fact it's likely DESKTOP\Steve account from the previous install. You can confirm by looking at the GUID for the user.
 
To gain access to your data, open up an admin command prompt and run the following commands.
 
takeown /f D: /r /d y icacls D: /reset /c /t icacls D: /grant Administrators:F /t  
You'll get a scary warning with the second command about it creating an unusable ACL - ignore it, as that's the exact thing we're trying to do. The second icacls command reinstates full privileges for Administrators.
 
You'll also be told the recycle bin on that drive is corrupt after you access D:, this can safely be ignored as well as the bin will simply get remade on the drive.
 
 
Let me know if this fixes your problems. For a disk with a LOT of data this might take a while to run.

Looking like you have your shit together is much harder live, you only get one chance 
for exmaple
 
 
He's been late for 5 years. 

check bios for lucidlogix is for switching from pcicard to onboard gpu
this was on mobo web page
check and make sure there no power save feature enabled for ssd on bios and maybe disable POST for startup to see if ssd stays working

Hey Everyone!
 
Wanted to start a thread in regards to my home datacenter project where I will post updates on what equipment I am playing around with. Completed is in quotes as you and I both know that nothing is ever 100% complete and is always changing. Just a quick rundown of what I have in my "datacenter" as of 11/29/17 (Top to Bottom):
 
g
1x Cisco 2960s POE+ Switch 4x1GB uplink to the core switch 1x Cisco 3650 POE Layer 3 Core Switch 1x Cisco Meraki MX64 (Wanting to swap this out for an ASA-5506X) 1x Motorola SB6120 Cable Modem (Wanting to swap this out for an Arris SB8200) 1x Cisco 2504 Wireless LAN Controller Controls Cisco 1702, 2702 and one 1602 Access Points 1x Cisco 2901 Router Used as a basic firewall between my internal perimeter network and my internal network (Skype for Business, Exchange Transport, and Reverse Proxies Live Here 1x Cisco 2921 Router Used for a Cisco CUCM Deployment. I care more about Skype for Business but it gives me the chance to learn a migration path from one phone system to another. 2x Cisco 2960s Switches Stacked for Servers Each Server's Network team is split between the switches so that if either of the switches fail, the servers stay online. HV4 HP Gen8 Microserver 16gb RAM Xeon 1220L V2 LSI 9260-8i Raid Card 1x 250GB SSD for OS Used as a Hyper-V Host for the following VM's File Server System Center VMM Library System Center SCCM Storage HV3 Dell R210 II 32GB RAM Xeon 1265 LSI 9211-4i 2x 120GB SSDs for OS and Virtual Machines 2x 4TB WD Red Drives in RAID 1 for Storage Used as a Hyper-V Host for the following VM's: Veeam Backup and Replication HV2 HP DL160 Gen8 2x Xeon E5-2670 (8 Cores, 16 threads Each) 192GB Ram (8GB DIMMS) HP P420i Raid Card 2x 72GB 15K SAS Drives in RAID 1 for OS 6x 300GB 15K SAS Drives in RAID 5 for VM Storage Used as a Hyper-V Host for the following VM's: 2nd Domain Controller SCCM Server SCVMM Server System Center SQL Always on AG SQL Server 2 Skype for Business Back end SQL Always on SG SQL Server 2 2x Skype for Business Front-End Servers (3 and 4) Many More Skype for Business Servers Many Many More VM's HV1 HP DL380 Gen8 2x Xeon E5-2670 (8 Cores, 16 threads Each) 192GB Ram (8GB DIMMS) HP P420i Raid Card HP P420 Raid Card 2x 180GB Corsair SSD's in RAID 1 for OS 4x 300GB 15K SAS Drives in RAID 5 for VM Storage 2x random test drives Used as a Hyper-V Host for the following VM's: Primary Domain Controller KMS Server System Center SQL Always on AG SQL Server 1 Skype for Business Back end SQL Always on SG SQL Server 1 2x Skype for Business Front-End Servers (1 and 2) Many More Skype for Business Servers Many Many More VM's Here's a look at the different subnets that I have and some other configuration information that I document (What I consider Confidential information has been redacted) Note that this is just a small part of what actually runs on my network :):
Click to enlarge:
 

 
Here is a video on the current status:
 
 
Please let me know what you think and give some suggestions!

Security from/for what?

The modem is separate, and doesn't have a switch built in.  It's a basic Moterolla Modem.  It connects to the Asus Router, and The router connects directly via 1 port to the Netgear Switch.

try getting windows media player classic codecs pack from downloads.com
also go into add programs then add components
is wmp available here?
i used to install the minesweeper game from here and when i bricked a wrt54g i had to install tftp from here
trivial not the right word either 
tortoise file transfer protocol better but it did work(still donot understand how though no ip actually established yet setting my ip static and tftp to gateway completed the firmware update and turned red lights green )tftp of 2mb file took an hour
point is theres some nice features in add components

bcdedit.exe /?
found it 
says in article to enable legacy if other OS is ntdrl (pre vista)
but does not say a limit to # of OS in list
 
note each OS can be advanced configured for max ram and cpu core total (legacy support 32bit be capped 4096)

every gui was built from cmd line commands and scripts
you need to use the,,, hmm crap i dont remember the name but its the boot manager you want to script
in cmd prompt type bootmanagers exe with  spacebar /?
this activates help system
wonder if microsoft ever tie /? into cortana