Kovi

I can't get the phone to turn off in order to put it into DFU.

Yes, I have. When I try and update it, it says "Your iPhone can't be updated; you must restore it to factory settings. And when I try to restore it, it prepares to restore, then fails with "An unknown error occurred (4013)"

I recently got an iPhone 6 plus with a cracked screen from a friend that had upgraded to the S8. I replaced the screen with one off ebay, and the phone still displayed things correctly, it just got stuck in a bootloop. I've tried updating via iTunes, using iTunes' recovery from an existing backup, and restoring to factory default via iTunes. Those all failed with error code 4013. I dug a little deeper and found a program called 3uTools. I've tried using that to flash it with the latest update, that also failed with error code -2. That error code means that there is a hardware problem. So, do any of y'all have and troubleshooting steps I can take to help identify the problem? I'm stuck in my house for the next few days (Thanks Harvey), so I'd like to get this problem fixed.

All AMD FX processors should work with that motherboard, and motherboards with FM2+ sockets will be compatible with your processor.

Duh! Sorry for my stupidity :P. Have you tried downloading the drivers from AMD's website (not XFX's, as they AMD might have updated drivers)?

I'm sorry, but I don't think that the RX480 supports crossfire.

Are you able to put it into the 'Hibernate' state?

You're going to want to clone the 500GB Barracuda onto the WDBlue, then boot from the WDBlue.

Just set the location to where you want Forza to be installed.

Do you have Forza Horizon 3 on Steam?

Do you have any extra components that you could try switching out with your current ones? (Hard drive from another PC, GPU, ect.)

I'd go with a 650 watt, to give plenty of room to grow. Keep in mind, this is one of the few components you can really future-proof. Also, make sure to buy from a reputable supplier (Corsair, CoolerMaster, ect.)

At the bottom right of your motherboard there is a section called JFP1. It is laid out like this: 1 2 3 4 A B C D E Plug the cables into the following pins: 1= Power LED + 2= Power LED - 3= Power Switch + 4= Power Switch - A= HDD LED + B= HDD LED - C= Reset Switch - D= Reset Switch +

$250 is the most I'd like to spend upgrading right now.

Edited out crappy link