RickySrx

To be quite honest with you im not using it as I don’t understood how it works I belive it won’t the inscrutions are terriable or I’m just stupid ?usually I don’t have problems like this but I can’t figure this out My would Ps4 not support this like ?

I’ve a home theater setup I usually have my pc connected to the projector via 5m hdmi and audio running via Bluetooth to the sound bar the soundbar is basic with Bluetooth nothing special my problem is the PS4 refuses to connect via Bluetooth leaving me to run an aux from the projector to achieve what I’m trying to do but this is not what i want as it’s really cable messy I bought a Bluetooth transmitter/reciver but can’t figure out how this works or if it will ? There must be a way surely THE END GOAL: to be able to have the Projector connected to the PS4 via HDMI For sound bar to out get audio via Bluetooth or other means preferable not cable messy (wireless) from the PS4

that won’t work because the PlayStation refuses to connect via Bluetooth to the sound bar therefor I’m left runnning a 5m aux from the projector to the sound bar to get it to work I tried to run a optical cable from the sound bar to PS4 but couldn’t get it to work

I got a PS4 and PS4 doesn’t support Bluetooth audio devices or something I have my PS4 directly connected to my projector and the audio from the projector is crap ?i was able to get the audio working but I had to run a 5M aux from the projector to speaker which looked horrible I’m looking for a wireless solution I bought a Bluetooth transmitter and reciver but don’t know how that works lot if it works for what I’m trying to do

[WARNING] Ignoring FILE_ATTRIBUTE_SPARSE_FILE of 44692 files this is another error that pops up during the installation in the cmd console

Hi there im trying to create a multiboot USB with YUMI and the i want one boot to be kali linux and the other windows7 to go I can create a bootable iso for windows 10 and Kali Linux etc to the USB but when it comes to the Windows 7 ISO I keep getting problems. I watched the console this time from start to end and realized it never installed successfully even though it said installation was completed. so basically this is the reason why it won't boot and I get the crash when booting to it. I've tried another iso for windows 7 x64 but they were the same size in GB, I might try x32 windows 7 cause I know it works because I have windows 10 working through YUMI and I used windows to go basically means its set up and done the partitions etc for me. And my purpose for all this is because my HDD doesn't work in my laptop and I want to try Kali Linux and windows on the one USB at the moment, I've Windows 10 and Kali Linux working fine on the USB at this moment but I want windows 7? Also I've been checking if the multiboot is working on my main machine and it does on my main PC if I go to the Boot menu I see UEFI : San Disk 58GB I click on it to boot and it flashes black and returns me straight to the bios where the boot selection is then there's a boot called just San Disk 58GB and that's what works but I've to manually do it it doesn't come up in the autoboot selection in my UEFI bios ? if that makes sense ill include pictures if you don't understand what I am talking about when I go to my laptop the drive doesn't show completely but I believe the laptop is different it ain't like UEFI think its EFI has a boot option called EFI Shell ? and when I boot into it its like a console I've no clue what this is . Good Syslinux Exists... A Previous MultiBoot Installation was detected... proceeding to add your new selections. Delete file: F:\multiboot\Installed.txt Rename: F:\multiboot\nsr2485.tmp->F:\multiboot\Installed.txt Create folder: F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\YUMI Creating a Virtual Hard Disk for Windows-7-SP1-Ultimate-(64-Bit). Please be patient, this may take time... Microsoft DiskPart version 10.0.17134.1 Copyright (C) Microsoft Corporation. On computer: RICKYSPC 100 percent completed DiskPart successfully created the virtual disk file. DiskPart successfully selected the virtual disk file. 100 percent completed DiskPart successfully attached the virtual disk file. DiskPart succeeded in creating the specified partition. 0 percent completed 0 percent completed 0 percent completed 0 percent completed 0 percent completed 100 percent completed DiskPart successfully formatted the volume. DiskPart marked the current partition as active. DiskPart successfully assigned the drive letter or mount point. Leaving DiskPart... Copy to F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\dskvol.txt C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp>echo H: 1>F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\dskvol.txt Installing Windows-7-SP1-Ultimate-(64-Bit) to Virtual Hard Disk. Please be patient, this may take time... Create folder: C:\Users\Ricky's-PC\Downloads\TEMPYUMI Execute: "C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp\7zG.exe" e "D:\Downloads\ISOs\Windows 7 SP1 Ultimate (64 Bit)\Windows 7 SP1 Ultimate (64 Bit).iso" -ir!boot.sdi -ir!install.wim -ir!install.esd -o"C:\Users\Ricky's-PC\Downloads\TEMPYUMI" -y Execute: "cmd" /c C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp\wimlib\wimlib-imagex apply "C:\Users\Ricky's-PC\Downloads\TEMPYUMI\install.wim" 1 H:\ C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp>REM THis file was created by Lance @ windows\ot H:\windows /s Copy failed Copy failed The boot configuration data store could not be opened. The system cannot find the file specified. The boot configuration data store could not be opened. The system cannot find the file specified. Delete file: F:\multiboot\menu\win2go.lst Rename: F:\multiboot\menu\nsw15B8.tmp->F:\multiboot\menu\win2go.lst Copy failed Copy to F:\boot\bcd Delete file: C:\Users\Ricky's-PC\Downloads\TEMPYUMI\boot.sdi Delete file: C:\Users\Ricky's-PC\Downloads\TEMPYUMI\install.wim Remove folder: C:\Users\Ricky's-PC\Downloads\TEMPYUMI\ Microsoft DiskPart version 10.0.17134.1 Copyright (C) Microsoft Corporation. On computer: RICKYSPC DiskPart successfully selected the virtual disk file. DiskPart successfully detached the virtual disk file. Leaving DiskPart... Copy to F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\YUMI\win2go.lst Windows to Go (Virtual Hard Disk) (Windows-7-SP1-Ultimate-(64-Bit)) and its menu entry were added! All Finished, Process is Complete!

[WARNING] Ignoring FILE_ATTRIBUTE_SPARSE_FILE of 44692 files this is another error that pops up during the installation in the cmd console

Thanks for the help, no YUMI works for my purpose I'm just having issues with it so basically I narrowed down the problem I can create a bootable iso for windows 10 and Kali Linux etc to the USB but when it comes to the Windows 7 ISO I keep getting problems. I watched the console this time from start to end and realized it never installed successfully even though it said installation was completed. so basically this is the reason why it won't boot and I get the crash when booting to it. I've tried another iso for windows 7 x64 but they were the same size in GB, I might try x32 windows 7 cause I know it works because I have windows 10 working through YUMI and I used windows to go basically means its set up and done the partitions etc for me. And my purpose for all this is because my HDD doesn't work in my laptop and I want to try Kali Linux and windows on the one USB at the moment, I've Windows 10 and Kali Linux working fine on the USB at this moment but I want windows 7? Also I've been checking if the multiboot is working on my main machine and it does on my main PC if I go to the Boot menu I see UEFI : San Disk 58GB I click on it to boot and it flashes black and returns me straight to the bios where the boot selection is then there's a boot called just San Disk 58GB and that's what works but I've to manually do it it doesn't come up in the autoboot selection in my UEFI bios ? if that makes sense ill include pictures if you don't understand what I am talking about when I go to my laptop the drive doesn't show completely but I believe the laptop is different it ain't like UEFI think its EFI has a boot option called EFI Shell ? and when I boot into it its like a console I've no clue what this is . Good Syslinux Exists... A Previous MultiBoot Installation was detected... proceeding to add your new selections. Delete file: F:\multiboot\Installed.txt Rename: F:\multiboot\nsr2485.tmp->F:\multiboot\Installed.txt Create folder: F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\YUMI Creating a Virtual Hard Disk for Windows-7-SP1-Ultimate-(64-Bit). Please be patient, this may take time... Microsoft DiskPart version 10.0.17134.1 Copyright (C) Microsoft Corporation. On computer: RICKYSPC 100 percent completed DiskPart successfully created the virtual disk file. DiskPart successfully selected the virtual disk file. 100 percent completed DiskPart successfully attached the virtual disk file. DiskPart succeeded in creating the specified partition. 0 percent completed 0 percent completed 0 percent completed 0 percent completed 0 percent completed 100 percent completed DiskPart successfully formatted the volume. DiskPart marked the current partition as active. DiskPart successfully assigned the drive letter or mount point. Leaving DiskPart... Copy to F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\dskvol.txt C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp>echo H: 1>F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\dskvol.txt Installing Windows-7-SP1-Ultimate-(64-Bit) to Virtual Hard Disk. Please be patient, this may take time... Create folder: C:\Users\Ricky's-PC\Downloads\TEMPYUMI Execute: "C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp\7zG.exe" e "D:\Downloads\ISOs\Windows 7 SP1 Ultimate (64 Bit)\Windows 7 SP1 Ultimate (64 Bit).iso" -ir!boot.sdi -ir!install.wim -ir!install.esd -o"C:\Users\Ricky's-PC\Downloads\TEMPYUMI" -y Execute: "cmd" /c C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp\wimlib\wimlib-imagex apply "C:\Users\Ricky's-PC\Downloads\TEMPYUMI\install.wim" 1 H:\ C:\Users\RICKY'~1\AppData\Local\Temp\nsw7681.tmp>REM THis file was created by Lance @ windows\ot H:\windows /s Copy failed Copy failed The boot configuration data store could not be opened. The system cannot find the file specified. The boot configuration data store could not be opened. The system cannot find the file specified. Delete file: F:\multiboot\menu\win2go.lst Rename: F:\multiboot\menu\nsw15B8.tmp->F:\multiboot\menu\win2go.lst Copy failed Copy to F:\boot\bcd Delete file: C:\Users\Ricky's-PC\Downloads\TEMPYUMI\boot.sdi Delete file: C:\Users\Ricky's-PC\Downloads\TEMPYUMI\install.wim Remove folder: C:\Users\Ricky's-PC\Downloads\TEMPYUMI\ Microsoft DiskPart version 10.0.17134.1 Copyright (C) Microsoft Corporation. On computer: RICKYSPC DiskPart successfully selected the virtual disk file. DiskPart successfully detached the virtual disk file. Leaving DiskPart... Copy to F:\multiboot\Windows-7-SP1-Ultimate-(64-Bit)\YUMI\win2go.lst Windows to Go (Virtual Hard Disk) (Windows-7-SP1-Ultimate-(64-Bit)) and its menu entry were added! All Finished, Process is Complete!

I want to create a multiboot USB drive with Kali Linux and windows but the USB is the main drive so its portable

So Let me begin when I create the Kali Linux boot it works fine but once I add windows7 to go it just either doesn't show in the bios boot menu anymore or it does, then when I try to boot into it, it gets me to the starting windows logo and just crashes and blue screens for like half a sec and reboots I recorded my screen and it said it was a hard drive problem, I think it's not working because I'm trying to create a window to go meaning its like already set up when I boot into it, I've been trying the other way of just doing the windows installer on YUMI but when I get to step where you've to select a drive it doesn't show my USB ? or some other drives I have? Thanks, This is really frustrating me

Im trying to get YUMI to create a multiboot usb with windows on the go and kali linux if its formatted to FAT32 it shows in my boot menu but just says UEFI : (myUSBname) i click to force boot to it and just flashes me back to UEFI bios when i try NFTS with kali and windows on the go (Windows 7) it just doesnt even show in the boot menu there is this thing called Uefi : built-in EFI shell i don't know what this is its on my laptop which is the device i want to use the multiboot on but it doesn't exist on my desktop PC so is there some sort of commands or something ive to write in to get this to work ?

found it thanks turned out to be ESC

That worked thanks im looking to USE another OS is there any other keys i should try to get into it while it boots

I've tried holding F2 while it boots and I've tried spamming F2 while it boots Laptop Link I've also asked Amazon customers how do I get into it and I got 3 replies and no one seems to know how to get into it, i googled it and I couldn't find anything either its quite frustrating Any help or explanation why this could be would be appreciated Thanks.

i have an Intel Core i5 4690K @ 4.20 GHz and this is the receiver i believe yeah i was unsure about the length id say id get away with 10m can you suggest any good 5.1 surround systems for around 300