Matt115

The overclock that worked yesterday will no longer boot. What could be the issue? It runs fine on 2666MHz.

Gotcha, thanks for the help and explanation!

I'm not sure what the default timings were for the RAM besides the default DOCP profile settings. I just changed the timings to 17 17 17 17 41 with 2933MHz with 1.35V and it is working. Should I tighten the timing and or decrease the voltage, or leave it be?

It is base 2133MHz, I’m overclocking to 3000MHz which is its labelled capacity here are the DOCP profile settings

I’m going to preface this by saying that I am very new to overclocking and don’t really understand how to tweak ram timing well. I have been trying to overclock my corsair vengeance ram to its proper 3000MHz. I started by just trying DOCP profile, which resulted in a boot loop. I manually changed the timings to those from a video on youtube and that has worked so far, but only at 2666MHz. My voltage is currently 1.35 and I can’t figure out how to make 3000MHz work (EDIT) Last night I enabled OC tuner which worked to boost my ram and cpu, but this morning it did not boot with the same settings. I’ve learned that auto tuning can over-increase voltage so I’ve decided not to use this. Perhaps my voltage is just too low manually for 3000MHz? I’ve also successfully slightly boosted my cpu to 3.7GHz Asus B350 Prime Plus Ryzen R5 1600 Corsair Vengeance LPX3000 GTX 1060 3gb Thank you!

Ok thanks guys ill keep searching around

I dont know if youve seen any of Linus’ “multiple people 1 pc” videos, but that seems like essentially the same thing.

I don’t know much about this but can you run for example two PUBG’s on one pc if you have two steam accounts that own it? Maybe you can use windows “desktop 2,3,4, etc.”

Yea sorry thats what i meant, just had to buy a new usb drive we didnt have an extras

System ended up being too unstable to reinstall windows with reset tool. Going to buy a usb with windows iso

Ive tested new ram and it didnt work either. Ive tried many things, if the windows install doesnt work maybe new mobo? It seems to be working fine

Recently I’ve built a new pc, and it ran well, untill i decided to overclock my ram without knowning what i was doing. I set the ram target speed higher without changing anything else. Windows didnt boot, so i put it back to default. It still has not booted since. Ive tested new ram, clearing cmos, updating bios, everything seems fine but it still runs into “service_error_exception.” Ive ran sysscan in safe mode and it said no violations were found. Could the os be messed up? Im planning a reinstall of windows later

Can it be done in safe mode? Ive tried and the program is not working (i can only boot safe mode)

Is it possible to reinstall windows without usb or dvd. Also it can only be done in safe mode. Thanks

New ram didnt work, updating bios praying it works Bios update did not work I recently installed new nvidia drivers could that be the issue