Jump to content

soumyagent47

Member
  • Posts

    20
  • Joined

  • Last visited

Everything posted by soumyagent47

  1. I have a Gigabyte AB350M HD3 and I haven't updated my bios in like four years because I didn't find any reason to but my CPU started underclocking out of nowhere (Ryzen 5 1600) so I thought maybe it's a system instability issue and I wanted to update then so I update to F20 from F10 and I couldn't start my PC for a long time so I removed the CMOS and replaced it with a new one it solved getting past the bios screen but then I couldn't get into windows so I wanted to install a fresh copy of windows out of a flash drive but the pc is stuck in some kind of a booting loop whenever the installation starts and the windows logo pops out, the pc restarts on its own and I don't know what's the problem if somebody can help me I would very grateful thank you.
  2. Hello people, ok so my problem is that initially my headphones and mic (mine is decent HP H120 headset) used to work good and then all of a sudden the headphones started producing buzzing noise/ white noise/ electric interference and ultimately the static was so much that I gave up on the onboard audio and decided to buy a cheapo usb sound card, which was working fine 7-10 days until today when strangely headphones were fine but the mic is problematic (no bars rising on recording device tab or any other software e.g. - Google voice search, discord in any game) and I think the levels are too low for any program to detect and for some reason I think that it's more of a software problem than a hardware problem although I can just buy another sound card, any suggestions to fix this problem would be appreciated. Thank You.
  3. @jstudrawaI - I built this PC around 1.5 years ago all the products are covered in warranty i don't think it will fail just yet, and no I dont have spare gpu because my another GPU died (from an old pc). @Derrk - CPU temps are 49- 50 idle and 60-65 under load and yeah I've reset everything back to stock after this happened using MSI afterburner and no I did not mess with the volts. I did not face this instability before, man and as I said the system is new I think (1.5years) Here are my specs - CPU - Ryzen 5 1600 Motherboard - Gigabyte AB350M - HD3 RAM - ADATA XPG 8GB @ 2800MHz GPU - MSI GTX 1060 3GB OCV2 SSD - WD Green 120GB HDD - WD Blue 1TB HDD PSU - Cooler Master 450 MWE Case - Antec GX505 Windowed Why are all the letters bold? and the funny thing is I'm writing this from the system and it looks stable with all the fans spinning and everything.
  4. As the title suggests my PC keeps crashing and sometimes restarting.automatically when at idle watching Youtube videos or playing games for about 1 - 2 hours and whenever it does it shows a screen like this - I need to know is my GPU failing or my monitor is past its prime(its very old HDMI TO VGA) or something? I used to oc the GPU a bit but after this I just run both CPU and GPU at stock because i'm afraid. Oh yeah I thought it must have been a heat issue so I cleaned my PC thoroughly(physically) set my fans at max speed and applied thermal paste to the CPU and the CPU temperature went down a bit !
  5. Hello guys so I've been having this problem where my PC won't turn on but tomorrow when I checked the PSU separately (with a clip) it turned on! so does that mean my motherboard is dead/fried? and if it is can any repair be done (it's warranty is over for 10 days now that I realized)
  6. I'm trying to overclock this graphics card - https://www.msi.com/Graphics-card/GeForce-GTX-1060-3GT-OC.html via MSI afterburner using this settings below and for some reason I can stress test using MSI Kombustor - Furmark (with these settings) just fine but during gaming it freezes and crashes to desktop So I want your opinion on this guys, am I just pushing this card too high? If so can you tell me how much to the core/mem clock would fine for me? or is it just a Driver problem?
  7. MSI afterburner is showing only (gpu)temperature in my OSD and nothing else
  8. MSI afterburner overlay just showing temperature any help?
  9. Will there be any problem in cable management issues?
  10. Hey guys, so I'm facing this problem when I mounted the ssd on antec gx505 it does not fit appropriately I have some pictures for reference here . As you can see(which you probably can't my bad I suck at shooting photos) the ssd in a bit slanted and to the left and it worries me that it will damage the component or not.
  11. Guys I have a TP-Link WR740N router and a TP-Link WN725N wireless adapter, for a month I was getting like 1 MBps out of my 5 MBps connection, it used to frequently disconnect me from my network and then one day I discovered that I put the adapter in a USB 3.0 port and the adapter being a USB 2.0 one, it was somehow probably throttling my internet speed and I was at my normal speeds once again when I reconnected it to a USB 2.0 port. So I recovered back my full speeds but I still get disconnected every now and then and when I heard about this software DD-WRT I began wondering can this thing in any way help me like increasing transmission power or something? I really could benefit from that extra range.
  12. Hey guys I am Ahmed,I'm 16 and this is my first PC Building I'm doing this on my own, I was trying to use pcpartpicker but for some strange reason I can't seem to find this exact motherboard which is strange, So I am posting it here :- CPU-Intel Core i3-6100 3.7GHz Dual-Core Processor. Link:- http://www.amazon.in/dp/B015VPX2EO/?tag=pcp03-21 MOTHERBOARD-MSI H110M-PRO-VH PLUS (Here is the link:- http://www.amazon.in/MSI-H110M-PRO-VH-PLUS-Generation-M...) MEMORY-(Hyperx Performance Gaming Black 4 GB DDR4 -2133 MHz) x2 (And the Link:-http://www.amazon.in/Hyperx-Performance-Gamming-Desktop...) GRAPHICS CARD:- Sapphire Radeon NITRO Rx 460 4GB GDDR5 Graphics Cards 11257-02-20G (The link:-http://www.amazon.in/Sapphire-Radeon-NITRO-Graphics-112...) POWER SUPPLY UNIT:-Corsair VS Series VS550 - 550 Watt SMPS. (Link:-https://www.snapdeal.com/product/corsair-vs-550-smps/50...) The all total cost is $498.822 USD to be precise{ (this is too much precise I guess }. So yeah guys how's my build? any suggestion is welcomed, thank you.
×