Jump to content

CaptainSav916

Member
 View Profile  See their activity

  • Posts

    242

  • Joined

  • Last visited

 Content Type 

Everything posted by CaptainSav916

  1. CaptainSav916
    waiting on my shroud. the one in the photo is a mock so I could get the loop going. it is RGB by the way! *wink wink*
  2. CaptainSav916
    Hey guys, thank you for all of the help, but the board ended up being a DOA, exchanged for a new one and she is now up and running nicely!
  3. CaptainSav916
    Thank you for replying, RAM is good as I am currently using the same sticks in the pc that I am currently using to talk to you, I will try the other suggestions, Thanks again
  4. CaptainSav916
    Will not boot to OS, and will lock up even when I try to use USB to reload, it will literally get to the windows loading screen, do one rotation of the circle and completely freeze up. This is the first time I have ever experienced this issue out of the 7 PCs I've built. I tried a different SSD, completely wiped the USB and reloaded the iso, i'm just lost at this point. My next step is to switch to the m.2 slot under the chipset, and then see if I can get a boot off of a SATA drive and see if a bios update would help and then try to reload onto the m.2 1700x, x370 gaming pro carbon, Samsung pm851 m.2, 16gb vengeance rgb, and the rest of the components are pretty much irrelevant to my issue.
  5. CaptainSav916
    I've used every fx motherboard above $100 with 8350, 8370, and even 9590 and have never had any overheating issues.
  6. CaptainSav916
    Might I also add that once malware is in your computer it is going to be there. malware screws with your files in a manner that antimalwares normally dont recognize because they are only designed to detect the malware activity itself.
  7. CaptainSav916
    Back up your files onto a seperate drive and reload your OS. That is the only proven 100% successful method to completely wiping your pc clean. Doing all of the work and starting over is crap, but sometimes you just gotta suck it up and deal with it. -Repair Technician II
  8. CaptainSav916
    If you think it's going to be moved at one point and its a heavier gpu, id say put the gpu in in a separate small box with padding. if it is a custom loop just lead the gpu in but store the box on its side. other than that youll be fine. everything else will be prettymuch sturdy unless you didnt screw things in tight enough.
  9. CaptainSav916
    All that shows is geforce experience which I already have.
  10. CaptainSav916
    I have the driver on the disk that came with my 1080, which is zero help because i dont have an ODD, looked everywhere, cant find it for windows 10, need it to OC my monitor, pulling out my hair, please help.
  11. CaptainSav916
    i love cramming parts!
  12. CaptainSav916
    I need one, cant find one. Caselabs is super expensive so thats out of the question.
  13. CaptainSav916
    id take the 50 bucks and just let it go lol
  14. CaptainSav916
    Your avatar is way too close to a swastika for comfort
  15. CaptainSav916
    barrows for a a cheap reservoir, yes, but dont be suprised if your G1/4 threads strip if you dont get your fittings in right on first go. don't buy anything else from barrow imo.
  16. CaptainSav916
    My Question: Do you like your PC? Yes= No to your question. No= Yes to your question.
  17. CaptainSav916
    FINALLY!!! Finished my first loop! I'll post my specs since that seems to be the cool thing to do. Loop: EKWB FC-GTX1080 NICKEL PLEXI EKWB EVO SUPREMACY AMD NICKEL PLEXI BITSPOWER Z-MULTI 150 CLEAR EKWB COOLSTREAM SE 360 ALPHACOOL VP6655 W/CLEAR TOP(forgot the name) 10x EKWB ACF 10/13MM CHROME EKWB DURACLEAR 10/13MM EKWB CRYOFUEL BLOOD RED XSPC G1/4 PLUG THERMOMETER Also I have an EKWB drain setup going out of the back of the case at the pump. You can see in the second photo where right after the pump the loop starts at the compression fitting and at the other end is the drain valve/ csq plug that goes out the case. Huge shoutout to all of you and helping me and engaging conversations with one another. You guys have really assured me that these things are possible! The lighting and camera quality sucks. I don't know how you guys get your photos to pop so much...
  18. CaptainSav916
    Might I ask why do you care for the Ryzen 3?
  19. CaptainSav916
    I used to work in an office and essentially they do the same thing. Just make sure they are the right measurements. I can however suggest that the mats need to either have a very close under dot(don't know what it's called) or an X pattern underneath.
  20. CaptainSav916
    How long did it take to dry? I need me some. I want to finger paint.
  21. CaptainSav916
    In response to the OP, I like to decorate my room with random parts laying around, boxes from shipments that were delivered over a week ago, and a steady arsenal of cans I spit my chewing tobacco in. Other than that, I like to occasionally rearrange my wife's scarlet figurines so that they aren't staring at me in the wee hours of the morning. It kinda bugs me that the figurines have turned back to normal. not sure if she moved them back and did not tell me or if they are going to kill me some time tonight.
  22. CaptainSav916
    Do people talk about it when they visit?
  23. CaptainSav916
    I heard the soul is absorbed into the walls and you gain mass FPS through a higher voltage fed directly to your PC. But what do I know about Flipping Pandas per Second.
  24. CaptainSav916
    I've always wanted sound absorbing pads. Being a married man and having to deal with the high acoustic levels of my bitch wife screaming, I feel I would benefit from it.
  25. CaptainSav916
    Most modern boards have a header for a pump. For example, my ASUS 970 pro gaming has a header labeled "W_PUMP". If you do not have a designated header for water pumps you can do two things, you can get a molex adapter, or plug it in to a very easy to remember fan header and set it to %100 using whatever utility you have. Just beware if you have an auto-tuning utility you want to override it in either BIOS or the utility because once you update the utility chances are it will adjust the speed to what it thinks is suitable for a fan because it does not know that it is a pump.
×