Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

kir13y

Member
  • Content Count

    123
  • Joined

  • Last visited

Awards


This user doesn't have any awards

About kir13y

  • Title
    Member

Contact Methods

  • Steam
    Kir13y

System

  • CPU
    Intel Core i7-6800K 3.4GHz 6-Core Processor (OC: 4.2GHz)
  • Motherboard
    Asus ROG STRIX X99 GAMING ATX LGA2011-3
  • RAM
    Corsair Vengeance LPX 32GB (2 x 16GB) DDR4-2666
  • GPU
    Asus GeForce GTX 1080 8GB STRIX
  • Case
    Phanteks Enthoo EVOLV ATX
  • Storage
    Intel 600p 512GB M.2 SSD, Western Digital WD Green 2TB 3.5" 5400RPM, Western Digital Caviar Blue 500GB 3.5" 7200RPM
  • PSU
    EVGA 850W 80+ Gold Certified Fully-Modular
  • Display(s)
    Asus ROG SWIFT PG278Q 27.0" 144Hz, Samsung S27D390H 27.0" 60Hz, Dell E207WFP (20"), Dell E207WFP (20"), Samsung SyncMaster 943N (19"), Samsung SyncMaster 943N (19")
  • Cooling
    NZXT Kraken X61 106.1 CFM Liquid CPU Cooler
  • Keyboard
    Corsair K95 RGB (MX Brown)
  • Mouse
    Logitech G502 Proteus Spectrum RGB
  • Sound
    Logitech G930 + Logitech Z506 (5.1)
  • Operating System
    Windows 10
  • PCPartPicker URL

Recent Profile Visitors

562 profile views
  1. So I carry around an ubuntu laptop for the work that I do as well as a surface pro as a writing tablet/windows device. There are times where I want to be able to use the surface as a second monitor like apple sidecar. I want to do it over cable so that I can work without an internet connection and with minimal software on the linux machine. I'm thinking of getting a cheap capture card, connecting the HDMI output of my laptop to the card input, and then viewing the output on the surface (through OBS or a similar software.) The thing that I'm unsure about is if the ubuntu laptop will be able to extend my desktop instead of just duplicating my display. Does the capture card show up as a second monitor (like when connecting an external display) or does it show up differently? Any advice would be greatly appreciated, thanks for reading!
  2. Using the Asus - PRIME Z270-P ATX LGA1151 Motherboard (full part list here: https://pcpartpicker.com/list/8jXXKZ). I have PCIE set to auto. I tried it when set to gen1 and still had the same problem. I'm not sure about +4g decoding though, I couldn't find it in the bios. What category should I look under? Is it "above 4g decoding"? If so, I already have that disabled. I also tried with both DMI config PCIE set to gen1 and PEG config PCIE set to gen1 with no luck.
  3. Currently going from 3 GPUs -> 7 GPUs. They are all the same 1070 (EVGA ACX 3.0 Black Edition). I have 3 GPUs working fine with risers and my monitor connected to one of the GPUs. I shut the computer down and added another GPU with a riser. I then try to power back on and it shows a blinking underscore ("_"). Then it just goes to a black screen (monitor is still getting a signal). I thought that the issue might be PSU related but I have 2 Corsair CSM 750W PSUs connected with this: https://www.amazon.com/gp/product/B0734Z24BJ/ref=oh_aui_detailpage_o00_s02?ie=UTF8&psc=1. The connection "guide" was a bit sketchy so I'm not sure if I did it right. I plugged one 24 pin into the mobo and the other into the adapter. I then connected a molex from the PSU connected to the mobo to the adapter. Then I connected the cards to power normally. Is this the correct way to use the adapter?
  4. just pick whichever u think is cooler. I prefer the strix cards but it's up to you and what you like.
  5. I found the problem! Notice how it says "Via any router IP" under server-2 SSH rule. I needed to set the external IP forwarding to the correct port so that it doesn't just forward all ports to that server.
  6. https://www.cryptocompare.com/mining/nvidia/nvidia-geforce-gtx-1080-ti/ The 1080ti probably uses more power ($) than it will make mining. The 1070 is really the sweet spot for mining.
  7. Wait wot... second gen intel cpu in a $1000 laptop? Maybe pass on this one...
  8. They are all on different ports. Also forgot to mention that I'm using Openwrt on Server Network Router with LuCi.
  9. I run riftcat with my phone which simulates a oculus rift. It works really well on my 1080 so you should be fine.
  10. It could be the CPU fan. Try running a cpu benchmark (like prime95) to see if the noise gets louder when the fan needs to run faster. I really don't know what else it could be.
  11. I have my network configured like this: TDS Router -> Main Router (WiFi) -> Server Network Router - Main Server (ubuntu) - Orange PI (debian distro) So I have ssh servers running on both of the servers on the Server Network Router. They are both configured to use different ports. I have the Server Network Router port forwarding the respective ports to the correct servers. When I connect to the Server Network Router from the Main router (using the Server Network Router's internal ip address, assigned by Main Router), using either port, it will connect to Main Server. I can then use Main Server to ssh into Orange PI with it's internal ip address (192.168.2.xx). Any ideas on why both ports are going to the same box? The TDS Router has ip addresses: 192.168.0.xx, the Main Router has ips 192.168.1.xx, the Server Network Router has ips: 192.168.2.xx.
  12. Update on this: After quite a bit of trial and error, I have narrowed the issue down to my Corsair devices. I have contacted Corsair support and will post once I find a solution.
  13. Update: I've been able to get the settings app (devices tab) open when everything disconnects and it briefly flashes driver error on all of the devices and then the entire settings app crashes. It's happened at least 20 times today, I shit you not. I'm just about ready to throw my pc out the window. This single reply has been such a struggle to type out, it's disconnected 3 times already and I'm not even done writi
  14. Update:Just got the same issue with all cameras unplugged. Also had the problem like 7 times when not playing a game so it seems unrelated to amount of input and may not be bandwidth related. I also forgot to mention that I have checked every single power saving option and turned it off. Ports will never turn off (in theory).
  15. Yeah when it disconnects, the LEDs go off on all devices (except the mouse).
×