c8h10o2n4

This is stunning. Very strong "Androidarts" vibes imo! As sff builds go this is as usual way out of my price bracket, but one can dream. And besides, there is always 3d printing... So maybe somebody could whip up something with a similar design phoilosophy.

After a while of just daily use etc i can report now that up to 2866 (1.35V CL16-18-18-38) everything is just smooth and no issues. Going above will not POST when all four slots are populated leading to the mentioned before behaviour. So this is where we are.

Thanks, that is reassuring in what we have been expecting basically. So we will continue going this route and i will post again once we get stable!

Hi all, coming to you with an issue I need advice on. We got new additional 16GB (2x8GB) of G.Skill DDR4-3200 RAM (identical to the kit already installed!) for our MSI Mortar B350M (with latest non-beta BIOS) with R5 1600. For over a year the system ran perfectly with an overclock of 3.8GHz on the CPU. Memory was simply set to use XMP and reported the expected 3200. Life was good. Now the following issues occur: when all 32GB are installed and set to XMP the computer will try to boot, fail retry etc a few times, then reset automatically to defaults, and it boots fine then into the OS. The memory then is set to 1866 only. So we tried a few things and ran memtest86: Now i looked around and when similar issues are reported here it is usually pointed out that it may be also a motherboard or cpu issue. My questions now: Is it really so hard to get this to run right? 1st gen RYZEN issue? Should we return the ram and get a two stick 32GB kit instead to have the amount we want and ditch the 16GB we have now - assuming the problem is the use of all four slots at once?

As far as I can tell it just takes (sometimes quite) a while to actually switch between loads. Same happened with my laptop - about a day into setting to full load it actually used the resources made available to it.

Over the course for a day the laptop is now using all threads at 100% and it also boosts up from 2.6 to 3.1GHz so apparently it was only a matter of it finding the right load i imagine. thank you very much for the replies tho. P.S.: In the case on my Laptop I can only use CPU, because it won't run on Intel Graphics!

Happily folding and this morning I also started to do so on my laptop. But for some reason, even when set to "Full" the CPU load according to Task Manager is only between 30% and 50% on my Thinkpad. It also only heats up to around 55°C. Any idea why this might be?

Very cool! I have been doing the BOINC seti@home thing for over a decade again and again, never really thought of making it a competition. Now i have started folding just this month and after seeing WAN show, here i am on the team! Why not get a chance to win a proper graphics card while doing a good thing :D

Don't worry. I am fairly certain the majority of people buy low end just as a rule of thumb. So it is in AMD's best interest to get those parts on the market. I think they went with the enthusiast lineup first to get most of the quirks ironed out to then release the line that the people will get that really dont want to bother with that kind of hassle or dont care to be early adopters of a fresh platform.

I thought so, which makes me wonder tho how much in video is done in term of cropping in post, i mean it must be one of the reasons for crazy high res video ... hmmm would that make it also ture to just shoot as big as you can to give you the freedom to crop more to your liking afterwards? i am sort of bad in this regard anyway, never touching up other than getting some chromatic aberration out form a cheap kit zoom and such i dont even crop. guess i am one of "those" people lol. well anyway, didnt mean to blow up the thread. so i guess i will withdraw from this corner.

I am interested as well, since this is pretty much what i want as well. (as soon as funds allow) PSU sounds sort of like a reason, but i am not certain about this. As a rule of thumb though: never skimp on your PSU to save money, ever.

It comes down to framing preference. The long time photographer in me looks down on either ratio though j/k. But 3:2 is where it's at honestly imo, it is a very nice balance and if you learn anything about laying out in ratios (..) you will see how good of a balance it is Aside from that ... choose the ratio not by the image data, but by the image quality, Forums used to be and i am sure still are full of how you generally should trust a good lens more than a good body (yadda yadda)

Would you also consider mumble? it is super simple, minimalistic even, and you can host servers yourself. We have a Pi running our server 24/7 for nearly two years. how secure and how accessible you want and/or need it you can tailor to your needs at no cost and completely independently of any third party.

Use your phone as a mobile hotspot if the rate is that is included with your plan is acceptable. Both on Android and iOS it is pretty easy to set up.

We placed he case outside in the yard and waited a little. By the time the case got cold (it was standing in the shade) and the lizard felt safe it ran away again. in the meantime while we were trying to trick it out of the case it just hid deeper in it, behind the HDD cages and such, Well not the wildlife returned to where it came from

Rat's nest non-modular PSU cable mess comes to mind ... yuck! We are in San Jose California, they seem to be common here, sorta like fancy rats maybe Never played Gex, what did i miss?

i think this has been answered now, i made a general thrad about this kind of issue, so i am gona link it here to help others finding this thread in the future:

THIS. i actually didn't think of this.problem solved! thanks! one DHCP for everything, no subnets, and all shared settings, turned out to be confusion wiht two network adapters only.

Well on Monday we have been cleaning around the house and that old computer (the one we used to rescue data from a degraded RAID 5) was still sitting around without a side panel when we had a visitor from outside. No idea if the cats chased it in or if it just was lost. but after a while of chasing it around the bedroom to get it out it ended up in this cozy space. I present to you: Computer Lizard Anybody else has had computers and wildlife clash?

Hello Forum! I am experiencing weird network related issues. Let me summarize what happens and lay out my setup: I have a Lenovo T430 Laptop with Intel Centrino Advanced-N 6205 (Wi-Fi) and Intel 82579LM GbitLAN. Running Windows 8.1. Network devices are a comcast xfinity modem thing, some switches, and behind one of them a WRT54G running DD-WRT as a pure access point for this area of the building. Now when i connect my laptop to any of the switches or the WRT via cable i can see games hosted and games i host are also visible, yet when we try the same thing with my laptop on wifi neither work. (we tried battlefront 2 and flatout 2 since those games run great on this laptop) Furthermore we also did try this at a different place where we can use wifi and we run into the same issue. in either case any other network task we do including windows filesharing and any kind of internet things work without any problem whatsoever. Any ideas?

Same problem here too now, LAN game is not visible on the other computer. One runs Win 8.1 the other Win 7. Any ideas? Maybe i forgot to check something

Side note about data rescue... I am sure most people who are more geeky than us and run a Linux system permanently as their dailies will not find this helpful, but to us and some that are still on windows despite all the privacy issues because we wanna game, there is a software from paragon that allows you to mount extfs on windows. also another that does the same with hfs. i have them both since i used macs a lot years ago and now we got the other for our rescued linux partition. TL;DR Use Linux partitions on Windows with ExtFS for Windows (they offer a free trial).

Status update and conclusion: After a four day long rebuild to an external USB drive we now have the original partitions back on it! Data can be recovered; everything seems to be readable just fine from my usual Linux live systems. One of the files i copied off of it, m4a i think was having trouble and skipped, so there might be a small percentage of data being corrupted. All other random files we tested however were fine. We are gonna plan out a new server set up in the coming months. I will probably post about it in a kind of a build log thread.