PeachyUwUSenpai

Also what's your powersupply

You may want to double check your power mode is set to high. had a friend who was running a 4090 in lower power mode by accident it acted very odd. otherwise how legit was the people you bought your rtx4090 from because that is sus output hopefully just outdated drivers like flipo mentioned and not a fake 4090

Could just be coil whine its hard to tell withought a recording of the sound Or possible your hdd if you have one

even with the power cords unplugged?

It kinda just depends on how busy they are but there's also other factors then labour its the Pebcak or user factor is the boss or other people going to freak out that there laptop or cellphone isnt connecting to wifi. with most decisions like this its mostly just weighing the pros and the cons Pros Devices wont all be kicked off the network and you wont get angry messages from your ceo manager etc redundant wifi incase the controller for the wifi7 set goes nutty Cons Theoretical unproven congestion (Like if this was proveable and you could show like greater then 40% slow downs sure or the internet being unuseable but other wise its kind eh) Higher attack surface And in the end at least all teams i've been a part of in small businesses always have a mountain of ever growing tickets so in the end lower priority things like this get pushed down.

its back for me now

Same just went to go see what's new and the sites down

What's your monitors refreshrate?

Its not about doing a better job as long as the screw goes in and stays in place and holds the thing properly it works. i've built computers with all grip sizes and have built ALOT of them and not one has failed due to screws everything from home computers to servers that are still in service to this day a screws a screw the only 2 ways to mess it up is either don't put in enough so it jiggles out or overdrive it so hard and so purposefully you literally cause the board to audible creak than crack or gouge the board. any thing between those 2 is a successful screw placement at least for computer components.

Id personally declare them all /32 and if my prof marked it wrong id lecture him on subnets till he gave me a correct mark.

i guess based on your answer the actual question is what is the lowest possible sub netmask. since on a actual network you can subdivide those so it could technically be anywhere from a /24 to a /32 and 2 being /16 to /32 so in short on a actual network no but in Theoretical question land i guess.

when you press the power button does stuff start happening ?

is your screen plugged into your mobo or your graphics card

doesnt really matter to much just make sure to screw it in well and make sure its pressed fully in before booting if you have a spare lower slot you can use that to. and perferably keep it off your desk so you hitting your desk when you die in a game doesnt move it and dont kick it when its running.

the maon caster does have live monitoring im pretty sure. but for that price range essentialy your looking at a interface plus a mic for a podcast the rode podmic is decent and cheap. as for interfaces with about 100 dollars left in budge there isn't much choice a Behringer U-PHORIA UMC22 Audiophile 2x2 USB Audio Interface with Midas Mic Preamplifier should work fine but you could always splurge more for a wave xlr or scarlet solo (the wave xlr is pretty great if you care about mixs and easier advanced audio tricks)