Ca0123

IDK, I take particular issue with the doubling down on the Billet Labs situation. I felt weird with the video where the conclusion was 'Hey here's an expensive product, watch us use it with incompatible components, then dunk on them for not being a good value'. Like yes, maybe not a good value to LTT, but when has top tier enthusiast hardware always been a good value? Majority of the time, enthusiast watercooling in a consumer PC is not a good value, but people enjoy it! There would of been a small group of enthusiasts out there who had there ears perk up about this product, even with the cost. But coming to the conclusion, a percentage may of been turned away purely based on your words and flawed testing. This is in conflict to the 7950X3D video, where you saw it was not performing correctly so you contacted AMD to confirm. Why do big companies like AMD get your extra '$500 of other peoples time', where LTT's influence over potential customers is an order of magnitude smaller than it is compared to a startup like Billet Labs? Why do they not get the same courtesy? May be an 'L' take, and happy to take it on the chin if others don't agree.

Hi guys, I've been using 'Dolby Atmos for Headphones' as my 'Spatial Sound' preference for a while now. However, Windows defaults back to either 'Stereo' or 'Windows Sonic for Headphones' whenever I restart, sleep, or change the audio output on the PC. I just want the PC to only use Dolby, without me having to change it every time I use it. Does anyone have a solution to this issue?

Hi guys, I have a 4K, 28" monitor and a 1440p, 27" monitor - stacked. Just wondering, as you guys would know that windows 10 'Display' settings see the monitors as 2 different sizes due to the differing resolutions, is there anyway to align these monitors in windows as if they were the same size/an inch out. Just looking to not have dead spots when the mouse is changing displays, be able to 'span' wallpapers, ect. Hope that all makes sense Anyone have any ideas?

Yeah, JayzTwoCents did it on his as well and recorded VRM temps. Again a 2 fan card, but they seem to do very well.

This guy did it to his Strix card and seemed to have really good results! https://www.youtube.com/watch?v=N0NL2ueZYDA

What would i be looking for in the BIOS though? The Nvidia control panel says it's being used in SLI

Yeah i bought a MSI high bandwidth bridge

Watch dogs 2, Dark souls 3, GTA V, Hitman 2016, Fallout 4\, ect.

Hey guys, I have recently bought a second GTX 1070 for my system, but when i fire up MSI Afterburner to test the GPUs, it shows that the 2nd GPU is using only 0%-5%. I've had negligible improvement in any of my games and I can't seem to find any reason why I'm having this problem. I have updated all of my system's drivers and made sure I've activated the second GPU in NVidia control panel. My system specs are: - Intel I5 6500 CPU - MSI Krait gaming x3 motherboard - X2 MSI GTX 1070 Armour OC GPUs - MSI high bandwidth SLI bridge - 16GB of DDR4 RAM Thanks guys!

Hey guys, I have recently ran into troubleshooting issues regarding my "Samsung 960 EVO M.2 250GB NVMe SSD" and my "MSI Krait Z170 X3 gaming motherboard". The issue came about when out of the blue my PC wouldn't post, I could only resolve the issue by taking out my SSD out of the M.2 slot, to which my PC boots twice and then begins working fine. The error that the board is illuminating is a VGA error. Can anyone please help, I have tried resetting the CMOS on the board but it doesn't help.

i can disconnect the 3 pin connector that connects to the molex to power the splitter... are there any 3pin to 3pin or 3pin to 4pin female connecters that i can use to power it?

I recently installed my PC in a Silverstone Primera PM01 case, and was disappointed to realise that the case only has a molex connecter for the fan splitter which houses 10 3pin connector fans. I was curious, since I'm a 'silent' PC nut, are there any adapters to change that molex connector into a 4 pin connector to connect to my motherboard so I am able to have a bit more control about the working curve of those fans. Thanks, Caleb

That's all I needed, thanks guys

I have quite an old HDD in my PC at the moment, and i have a replacement HDD to put into my PC. I want to completely transfer all my data from one disk to the other so the PC's OS is not effected and I can run the PC off the new drive. How do I do this?? I've searched around and all that has been a result of me being confused about the long and suspicious applications people are suggesting to use. Please help