Jump to content

GigabitXe

Member
  • Posts

    333
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Profile Information

  • Gender
    Male
  • Location
    The US of A
  • Interests
    Anything electronic.
  • Occupation
    Student

System

  • CPU
    Ryzen 5 3600
  • Motherboard
    AsRock B550M
  • RAM
    16GB G.Skill Ageis
  • GPU
    Radeon RX 570
  • Case
    Cooler Master NR400
  • Storage
    500GB Crucial NVMe M.2, 2TB Seagate Barracuda
  • PSU
    EVGA 500W
  • Display(s)
    LG UltraGear 144hz
  • Cooling
    Cooler Master Hyper 212 Black Edition
  • Keyboard
    G.Skill KM780R RGB
  • Mouse
    Logitech G402
  • Sound
    Logitech Z623 2.1 Stereo System
  • Operating System
    Windows 10 Home 64-bit

Recent Profile Visitors

1,326 profile views
  1. I can't believe this worked but reseating it seems to have fixed the problem. We'll see if it stays. Thanks!
  2. I recently salvaged a Intel 8260 Wireless card from an old laptop. Since my motherboard, an Asrock B550M Steel Legend, has a dedicated slot for an M.2 Wi-Fi card I installed it. After booting, Windows 11 found the intel wireless drivers just fine and I can connect to Wi-Fi no problem. However, despite this card supposedly having integrated Bluetooth (according to Intel) I cannot get Bluetooth to detect. There are no Bluetooth devices showing in device manager and when I run the troubleshooter in Windows settings all it says is "This device doesn't support Bluetooth". I have tried manually installing the intel Bluetooth drivers but it still won't detect. Not really sure what else to try. Any ideas?
  3. I just tried that and I don't think it will work because it is a University account and is controlled by the school. There is no CID in the address bar as required by that guide.
  4. Unless I am missing something I have done this already. I have complete access to both my personal and school accounts on my PC. I am able to open both and both are set to sync. The only thing I am having trouble with is adding a link to my school drive in This PC. I would like a link to my school drive (like I have to my personal drive) in the spot indicated by the arrow in the screenshot below.
  5. I have both accounts added to my PC and I can access them, I simply want to be able to open the University Drive from This PC.
  6. I use OneDrive both for personal use and school through my University. I currently have my personal OneDrive listed under Devices and Drives in This PC in file explorer (see screenshot). I would like to add my university OneDrive in this same spot, but I can't for the life of me figure out how. Both OneDrive's are listed in the left hand navigation, but I can't get the University drive to show up in This PC. I tried dragging it, right clicking (there was no option to add it) and going into OneDrive settings. How do I do this, if it is possible at all?
  7. Thank you all for your input. I took the switch to my networking instructor at college, and he could not figure out this issue either. I am going to return this unit and get a replacement.
  8. Of those, only 9600, 38400, and 57600 gave output, but it was the same as 115200.
  9. 179000 does not work either. Same output as 115200.
  10. What exactly is the reset process? I have tried holding the mode button when plugging it in, and that did not work. I also tried holding the mode button once it was booted, and that did not work either.
  11. I just tried that and it did not work. Very similar result to tera term. The switch appears to be booting, but the console output is not readable.
  12. I have tried Putty (sorry I didn't mention that) and it did not give clean output either. As far as I know there is no configuration on the switch, so how would I go about accessing the web-ui? Also, I tried resetting it by holding the mode button when powering it on. Is there another way to reset it?
  13. I recently bought a used Cisco WS-C2960S-24TS-L network switch to start building a home lab. However, when I console into the device the output is just a bunch of random characters (see image). I did some searching on the Cisco forums and the common suggestion there is to try different baud speeds until one works. I tried all of the available speeds in TeraTerm and none of them give me clean console output. I also tried resetting the switch by holding the mode button when plugging it in, but that didn't work either. Is there anything else that I can do to try and fix this? If not I'm going to have to return it and get a replacement.
  14. Yep, just got it in the mail today and it works great.
  15. I thought about that, but my desk is quite small and I feel that another thing sitting on it will just make everything too cramped, and I am also trying to get things looking as clean as possible.
×