Jump to content

4hwgenxx

Member
  • Posts

    39
  • Joined

  • Last visited

Reputation Activity

  1. Like
    4hwgenxx got a reaction from jkraghify in Assassin creed unity VRAM   
    at the beginning before 970's come to me i had a single r9290 that with eyefinity scale much better than Nvidia surround...using 3x asus vg248qe 144hz at 3240*1920 with the sli can't run over 35/40 fps...that is insane, because at 1080p with 4x msaa i get +double fps like i said before with same vram draw...i dunno...so i switched to a single monitor again also i have the sli because i really need more frame, with 144hz monitor, i hope in future i can see a 2560*1600 120fps ips monitor, than i switch to that, or maybe a good tv like 47/50"
  2. Like
    4hwgenxx reacted to jkraghify in Assassin creed unity VRAM   
    I believe you, but what resolution are you running at? Before the patch the 980s couldn't handle it. At 1080p, holding 60 fps was possible, but any resolution beyond (even with the 980s) was not possible.. When somebody buys two 980s, they probably plan to game at 1440p or 4k or use some sort of surround setup.I didn't know about the patch though. On launch, the statement I made before was true.
    Nice rig man
  3. Like
    4hwgenxx got a reaction from Overl0rd in [4hwgenxx-Build] MK-Classified-X (24Tread Of Love)   
  4. Like
    4hwgenxx got a reaction from alpenwasser in [4hwgenxx-Build] MK-Classified-X (24Tread Of Love)   
  5. Like
    4hwgenxx got a reaction from megadarkwood in [4hwgenxx-Build] MK-Classified-X (24Tread Of Love)   
    =) thanks!
  6. Like
    4hwgenxx got a reaction from megadarkwood in [4hwgenxx-Build] MK-Classified-X (24Tread Of Love)   
    motherboard is arrived!! i just weating for the new vga and waterblocks!!!!
    tapatalkizzato
  7. Like
    4hwgenxx got a reaction from hiyayhi in [4hwgenxx-Build] MK-Classified-X (24Tread Of Love)   
    FIRST OF ALL :. Exuse for my very BAD english!!

     

    MK-Classified-X

     

    Hi bros!! I bulding pc's since i was 7th years old (my father ask me to build something with two old pentium III he's brought to me). Its my passion, my believes, my life and yes maybe pretty much every computer i made its like a friend, sometimes i spoke to them D: . I know, i know...im a pretty nerdy...and you know what?!? IM SO F***ING PROUD OF IT!! ;D

     

    But never mind, now im here to speak about a "little" friend of mine.

     

    HARDWARE USED :.

     

    MotherBoard - EVGA SR2 (SuperRecord2) (MAX BCLK REACHED :. 217Mhz)

    Cpu's - INTEL Xeon X5645 2.4Ghz 12Mb (MAX MULTIPLIER :. x19)

    Ram - CORSAIR Dominator Platinum 6x4GB (24GB) 2133Mhz Cas 9-11-10-27 @1.5v

    Gpu's - ASUS R9 290X Watercooled

    Psu - ENERMAX Platimax 1500W

    Case - CORSAIR Obsidian 900D

    Ssd - Samsung SSD Pm810 SataII 128Gb

    Hdd - Hitachi Deskstar 2Tb

     

    WATERCOOLING SYSTEM :.

     

    Radiator - 2x Alphacool X45 360mm + 1x Alphacool MONSTA 480mm + 1x XSPC 240mm

    Pump - Laing DDC 1T + Alphacool TOP

    Fanbus - Lamptron FC2 (6 channel with maximum 30w for) , planning to found a way to fit in 900D front...because is little more big

    Fan's - 9x 120mm Aerocool Red Led 1500rmp ; 9x 120mm NZXT 2600Rpm ; 1x 120mm Enermax Custom Led Fan

    MbWblock - Nateman EVGA Forum's Custom MASSIVE BLOCK (true copper)

    Cpu'sWblock - EK Supremacy Acetal+Nickel CSQ

    Gpu'sWblock - EK FC R9 290X ACETAL

    WaterTank - EK for 5.25 front bay

     

    OUTPUT HARDWARE :.

     

    Keyboard - Logitech K350 wireless

    Mouse - Logitech G9X

    Mousepad - Razer Vespula

    Monitor - switch to a 39" TV LED...i hope i can downsaple it at 1440p

     

    PHOTOS :.

     



     

    THIS SISTEM IS NOT A WORK STATION

     

    I plan to build this because im a very hardcore gamer, i need very massive AA samples and many tweaks when i play like 4k downsapling for 3rd person camera game and 1440p 120hz for 1st person shoter game! :Q___ but i also used it with Maya, 3dsMax and other program for video editing and encoding or ripping bdray movies!

     

    I was able to reach, when i have the platimax 850 psu a maximum clock like 217bclk x 19multiplier (4123mhz), that is really awsome for the board and for the cpu's to, with a UNCORE clock of 3906mhz, with all 24 tread used!

     

    I really like my sistem, i love it...but SOMETHING APPEN THAT DAY...

     

    I was left over my old Xigmateck Elysium, to build the sistem with my new platimax 1500w and brand new 900D!!! And when i finish to build it, PEFECTLY, i start up the loop to fill it, everything fine here...after 1 hour i was pretty sure that the loop was right...but was not...after 2 hour and half after i boot up my system, he's self shut down...BECAUSE WATER KILL MY BOARD

     

    But never mind, i bought a new one next days untill the rma is processed, and in the end i used the rma ones like backup motherboard...

     

    STAY TUNED FOR THE TONS OF PICTURES WHERE THE MOTHERBOARD ARRIVES!!

  8. Like
    4hwgenxx reacted to Gamebozzo in Watercooled 900D   
    intel i7-3970x
    rampage iv extreme
    dual sli titans
    and u might want a larger psu like 1200axi
  9. Like
    4hwgenxx got a reaction from tristan1035 in [4hwgenxx-Build] MK-Classified-X (24Tread Of Love)   
    i dont notice any different from the desktop version...and with dual xeon you can do other things that a norml processor cant
    ...or better he can but slower than two xeon, like video editing, encoding and work with program optimized for multitreading...but if you pay attention in crysis 3 the game run better with hyper treading tecnology so i can benefit not of 12tread but 24...i do not know if this can be considered an a awsome score but i can run crysis 3 stable at 40fps maxed out at 4k + txaa 2x with vga's at stock speed and cpu at 3.8ghz...when i reassemble the system ill post some screen!!!
    Inviato dal mio iFake5 now Free
  10. Like
    4hwgenxx got a reaction from Dr3nz4r in [4hwgenxx-Build] MK-Classified-X (24Tread Of Love)   
    FIRST OF ALL :. Exuse for my very BAD english!!

     

    MK-Classified-X

     

    Hi bros!! I bulding pc's since i was 7th years old (my father ask me to build something with two old pentium III he's brought to me). Its my passion, my believes, my life and yes maybe pretty much every computer i made its like a friend, sometimes i spoke to them D: . I know, i know...im a pretty nerdy...and you know what?!? IM SO F***ING PROUD OF IT!! ;D

     

    But never mind, now im here to speak about a "little" friend of mine.

     

    HARDWARE USED :.

     

    MotherBoard - EVGA SR2 (SuperRecord2) (MAX BCLK REACHED :. 217Mhz)

    Cpu's - INTEL Xeon X5645 2.4Ghz 12Mb (MAX MULTIPLIER :. x19)

    Ram - CORSAIR Dominator Platinum 6x4GB (24GB) 2133Mhz Cas 9-11-10-27 @1.5v

    Gpu's - ASUS R9 290X Watercooled

    Psu - ENERMAX Platimax 1500W

    Case - CORSAIR Obsidian 900D

    Ssd - Samsung SSD Pm810 SataII 128Gb

    Hdd - Hitachi Deskstar 2Tb

     

    WATERCOOLING SYSTEM :.

     

    Radiator - 2x Alphacool X45 360mm + 1x Alphacool MONSTA 480mm + 1x XSPC 240mm

    Pump - Laing DDC 1T + Alphacool TOP

    Fanbus - Lamptron FC2 (6 channel with maximum 30w for) , planning to found a way to fit in 900D front...because is little more big

    Fan's - 9x 120mm Aerocool Red Led 1500rmp ; 9x 120mm NZXT 2600Rpm ; 1x 120mm Enermax Custom Led Fan

    MbWblock - Nateman EVGA Forum's Custom MASSIVE BLOCK (true copper)

    Cpu'sWblock - EK Supremacy Acetal+Nickel CSQ

    Gpu'sWblock - EK FC R9 290X ACETAL

    WaterTank - EK for 5.25 front bay

     

    OUTPUT HARDWARE :.

     

    Keyboard - Logitech K350 wireless

    Mouse - Logitech G9X

    Mousepad - Razer Vespula

    Monitor - switch to a 39" TV LED...i hope i can downsaple it at 1440p

     

    PHOTOS :.

     



     

    THIS SISTEM IS NOT A WORK STATION

     

    I plan to build this because im a very hardcore gamer, i need very massive AA samples and many tweaks when i play like 4k downsapling for 3rd person camera game and 1440p 120hz for 1st person shoter game! :Q___ but i also used it with Maya, 3dsMax and other program for video editing and encoding or ripping bdray movies!

     

    I was able to reach, when i have the platimax 850 psu a maximum clock like 217bclk x 19multiplier (4123mhz), that is really awsome for the board and for the cpu's to, with a UNCORE clock of 3906mhz, with all 24 tread used!

     

    I really like my sistem, i love it...but SOMETHING APPEN THAT DAY...

     

    I was left over my old Xigmateck Elysium, to build the sistem with my new platimax 1500w and brand new 900D!!! And when i finish to build it, PEFECTLY, i start up the loop to fill it, everything fine here...after 1 hour i was pretty sure that the loop was right...but was not...after 2 hour and half after i boot up my system, he's self shut down...BECAUSE WATER KILL MY BOARD

     

    But never mind, i bought a new one next days untill the rma is processed, and in the end i used the rma ones like backup motherboard...

     

    STAY TUNED FOR THE TONS OF PICTURES WHERE THE MOTHERBOARD ARRIVES!!

  11. Like
    4hwgenxx reacted to PBaines in Custom Water Cooled Desk - 56k warning. Lotsa Pictures! *Now with Table of Contents*   
    what we first start off with is making some guideline holes so that we are able to do better cuts with the jigsaw allowing us to change angles easily.

     
     
    Mid way cutting.

     
     
    now time to lay it on, and all is good.

     
     
    a wild cat appears! "hmmmm, can i fit through here?"

     
     
    "Why yes! of course I can!"

     
     
    marking out the other side, and repeating the process

     

     
     
    both sides have been completed and look very nice. they are BOTH yet to be routered so that the grill sits in flush. but that is next days off job.

     
     
    I quickly decided that I would do my 5.25" holes, one for a Blu Ray drive (basically just incase i need it for whatever case. And no, I couldn't be bothered getting a USB one), and also will be fitted with a Fan Controller too.
    Here is the plan...

     
     
    Holes done

     
     
    all cut out

     
    with a bit of extra little rasping (wood equivalent of a file) they fit nice and snug! Though like the rad grills. Will router a recess for them to sit flush in. If some may notice, the drives are sitting lower then centre, this is because I will probably put my power/reset buttons above the 5.25" area. 
    and ps, yes I know the middle piece between each 5.25" slot is weak as hell, and I understand that. If it breaks it breaks, if it doesn't it doesn't! it looks nicer with it though 

     
     
    Oh, and this is the glass installed 
    easy to remove to, simply put fingers between the two glass sheets and lift the top one up! the front bit is siliconed in place

     
    Next update will be Wednesday of everything routered
    and then theres only two holes left to do (PSU, I/O shield) and its time to d-d-d-d-d-drop the hardware in!!
     
     
    Here is how I will be spacing my UP7 to the desk itself. just a few rubber spacers, that will be screwed into the desk, will have to go find some nice long thin srews while I think about it!

     
    We start with the routering of the 480 grill rebate, so that the grill can sit nice and flush

     
     
    The middle bits had to be done also, and were very difficult too as after a few cm's the router wasn't sitting flush anymore so would 'dip' as you can see in the picture where it dipped a little bit. but that's okay! it's not seen 

     
     
    Thinking about how I could find a packer to use that allowed an extra bit of width... duh, why not use the template to rest the router on!

     
     

     
    Now, this is what it looked like! the rebate for the grill was done, and also i further rebated in a rectangle for the actual little hex-hole grills to sit in too

     
     
    Then there was about a 2 week period where I did nothing in life but work/sleep. UNTIL my parts arrived! and I will also be getting another GTX 680 4GB too 
     

     
    After thinking and googling, I figured a way that I could mount my power supply tidily, by making a metal template I guess you'd call it. where you would screw the thin sheet steel to the desk so you could then be able to screw the psu in! 

     

     

     
    And then there she was. the template to cut out the... template :B

     
    Mid way cutting it out, realised I shouldn't have cut the paper up so much as it was so hard to get the small rectangle square again! 

     

     
    And there it is. Not the tidiest and 100% most beautiful, but it will be painted, not seen. It will serve the purpose it was made to do _b

     
    Time to mark out where the IO shield will be put, and also where my PSU hole will be too.

     
    Time to do my preliminary guide holes for the jigsaw

     
    And there it is, all nice and square!

     
    The PSU Template works well too

     
    Now, the one thing that bugged me the most... The PCI holes. How do do them? Do I rebate them? Do I cut out one big hole instead? I will do it individually instead and rebate me thinks..

     
    I then proceeded to use the smallest router bit I had and rebate the groove for the PCI brackets to sit in.
    Also, the top L piece of the bracket needed somewhere to sit in, so I marked the lowest point the bracket could sit, otherwise the card when in the motherboard will be on a lean and could have a dodgy connection to the PCI/E Lane

     
    Making sure my depth was correct, I used a test bit of wood to make sure that when it came to the final piece, it was done properly.

     
    A Perfect fit!

     

     
     
    Just a FYI, to prevent any scratching this is how I lay the top down to do any cutting/routering etc

     
    Now that the first PCI slots had been cut, it was time to finish the rest off

     
    Here is how I measured the spacings for where the slots went, just an old case I chopped up!

     
    All cuts done

     
    Next, to square all the holes out I figured, what better way to do that, than with a Router! Least that's what I thought. The insertion of the bit went well, as soon as I itched it to the right BOOM. the middle piece of the PCI slots just snapped off.. I said a naughty word beginning with F. the next one began with C. hehe

     
    It was time to resort to Plan B. Cut the whole damn thing out and chop the PCI bracket bit out of that old case that was in the pic above

     
    it looks a lot tidier this way anyway, so while I am not happy the slot snapped out, I am happy with the result I guess!

     
    So after cutting the PCI Bracket out, i gave it a quick sand and a quick paint with orange and will continue to polish it up over the next week but just wanted to test it out for the time being to make sure all was well... Guess I was just impatient and wanted to see if when everything was laid out in the desk it would all look pretty is more appropriate
     
    PS- Hello Vita! (sheep)

     

     

     
    After the day, I moved everything to it's little box. and covered it. Until tomorrow 

  12. Like
    4hwgenxx reacted to V1RK in (Updated) Just Finished off first watercooled Rig   
    Updates (23/05/2014)
    Made a few changes to the build
    Case colour is white used spray paint, I have another 750d which will be air brushed so did temporary spray paint to see what it looked like on main case Changed motherboard to MSI Z77 Big Bang M Power OC board  Used slighlty thinner tubing  Using XSPC 360 Crossflow Rad with two fans only, third will be added but due to dual resbay up top still need to change Using XSPC EC6 UV Blue Sharkoon UV lights XSPC LCD watercooling montior  Additional SSD added which is Crucial M500 240GB  NZXT Sentry LXE fan controller Dual monitors- First is LG27EA63 and second is Asus VE278H Update (24/10/2013)
    Will be installing another ssd OCZ Solid 3 120 which I already have and 2 additional drives for storage 2TB Seagate & 3TB Toshiba drive.
    Changed the case over to the Corsair 750d, still making changes atm due to leak but will have it fixed by the weekend.
    I've attached the latest picture of what the case currently looks like with everything in
     
    My Full Build Information 
     
    CPU: Intel i7 2700K @ 4.9Ghz
    MB: Asus Sabertooth Z77 
    RAM: G.Skill RipJaw X 32GB 1866Mhz 
    GPU: EVGA 2GB GTX770 SC
    Sound Card: Creative X-Fi Fatal1ty 5.1  
    PSU: Corsair HX750
    NZXT White led lights and Fan Controller
    Case: Corsair 750D
    Watercooling kit: XSPC EX240 dual rads 240mm x2, XSPC Raystorm 750 res/pup, XSPC waterblock and gpu Waterblock
    SSD: Kingston 240gb
    HDD: Seagate 2tb & 1TB Hitachi 
    Forgot to mention leap motion 
    Logitech G110 Keyboard
    Creative Fatal1ty mouse (Changing this to a Mad Catz Rat 3 Mouse)
    Logitech 5.1 Surround X530 
  13. Like
    4hwgenxx got a reaction from legopc in MK-CLASSIFIED-X - time of innovation??   
    if i've got i start my worklog and you can see the power unleashed!!! Inviato dal mio iFake5
×