Jump to content

GEREddie

Member
  • Posts

    13
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Dude I wanna thank you, and I appreciate your help and support but, i figured it out thank God, after I've done a lot more research about PSU, Mobo and I/O problems, I saw a video suggesting that after i cleared the CMOS, I turn the PC back on and spam f8 even if seems like there is no connection to any of the peripherals, and that will take me to the BIOS settings! And from there i just set the time and date and i save and exit and that should do it! Again i want to thank you for your help! #PCMR
  2. The fans are spinning normally and all the lights on the mobo and gpu are working just fine
  3. I only force restart once
  4. Unfortunately I can't, there is no signal to the monitor!
  5. Hello, I don't know what happened to my PC it was working fine, I was playing GTA V, and all of a sudden it froze and I got a blue screen and as far as i remember it this was written "IRQL_NOT_LESS_OR_EQUAL." So it restarted again and i got another blue screen i can't remember what it said, this time it restarted and gave me this blue screen as it shown below, so i pressed enter nothing happened, i press f1 I can't remember what it gave me so after that i pressed Esc and it gave me a black screen and it says "initializing boot..." or something like that at the end it said press ctr+s so I did, nothing happened so i held down the power button to restart again, because i figured maybe it froze again, after i turned the PC back on the PC was running, all the fans were spinning but the monitor, the mouse and the keyboard had no signal, i looked everywhere for a solution, nothing worked, i thought maybe its a graphic card issue, so i removed it and connected the HDMI to the motherboard it didn't work, I removed the battery from the motherboard to clear C-mos because i thought it might be a bois issue as some video suggested, also didn't work, i checked if the ram sticks was seated properly it was (I did not take them off though just pressed on them to see if they're seated properly.) Can someone please help me with this issue, because i really don't know what to do! PC specs i5-7600k 16gb hyper x ram GTX 1080 SSD: 240gb WD blue "boot drive" Mobo: ASRock z270 Extreme4 PSU: EVGA 500w bronze
  6. Guys thank you all for your help, I just fixed the problem, I opened MSI Afterburner, and I realized that my GPU usage was at 60%, so I did a little search, and I found a video, I will link it below, that helped a lot, the problem was the RAM, I just had to enable XMP profile, now my FPS avrage is 92!
  7. No, I don't think the setting is too high because I didn't have this problem before, with the same hardware and settings I used to get an average of around 90 FPS, I thought maybe because I didn't update the drivers for a while but, I just did, and the FPS is still locked at 60!
  8. Hello Everyone, I have an FPS problem with GTA V, my FPS never goes above 60, and when I go to an area where there is a lot of grass, it drops to 45 FPS sometimes less, and as you can see from the pictures below showing the graphics settings, I have Vsync off PC Specs: CPU: i5-7600K @ 3.80 GHz "I didn't overclock it" Mobo: ASRock Z270 Extream 4 RAM: 16 GB DDR4 Hyperx Fury GPU: MSI GTX 1080
  9. i place it on my desk of course, and the room temp is 23-25 degrees, but i dont use a cooling pad, i mainly play League of Legends and it works perfectly fine but, sometimes i love to play games like GTA V, and thats where i face the throttling.
  10. Hello good friends, I have the Lenovo y50-70 and i have a problem with it, it over heats a lot while playing games like GTA V, BeamNG Drive, COD BO3....etc, the first 30 mins it plays well after that, i get a lot of FPS drops, like when i start playing GTAV for instance i start with 60 FPS after a while it drops to 20 then goes to 40 then drops to like 12 and just keeps on doing that all the time, and the temps reaches 93-98 degrees celsius, i heard if i changed the thermal paste and use a cooling pad will help with this problem, so i wanna know if thats true, and if there is anything else i can do that could help me i would be greatful
×