my cpu will not run cool. It is idling at about 50c and as soon as i add a load it jumps to 90-100c within just a few second.
I was using a stock cooler on my i7 4790k so I thought it might be the cooler
I swapped out to a antec h2o 1250 closed loop water cooler and upgraded thermal pasted to artic silver 5
i reset my bios to defaults and still the same issue is occuring. as soon as i add load to the cpu the temps go through the roof
any ideas would be appriciated
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 8 (max 8)
Name Intel Core i7 4790K
Codename Haswell
Specification Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
Package (platform ID) Socket 1150 LGA (0x1)
CPUID 6.C.3
Extended CPUID 6.3C
Core Stepping C0
Technology 22 nm
TDP Limit 88.0 Watts
Tjmax 100.0 °C
Core Speed 3099.3 MHz
Multiplier x Bus Speed 31.0 x 100.0 MHz
Stock frequency 4000 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 8 MBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
Turbo Mode supported, disabled
Max non-turbo ratio 40x
Max turbo ratio 44x
Max efficiency ratio 8x
O/C bins unlimited
Ratio 1 core 44x
Ratio 2 cores 44x
Ratio 3 cores 44x
Ratio 4 cores 44x
TSC 4000.0 MHz
APERF 3305.8 MHz
MPERF 4000.2 MHz
IA Voltage Mode PCU adaptive
IA Voltage Offset 0 mV
GT Voltage Mode PCU adaptive
GT Voltage Offset 0 mV
LLC/Ring Voltage Mode Override
LLC/Ring Voltage Target 1203 mV
LLC/Ring Voltage Offset 0 mV
Agent Voltage Mode PCU adaptive
Agent Voltage Offset 0 mV
Temperature 0 51 degC (123 degF) (Core #0)
Temperature 1 47 degC (116 degF) (Core #1)
Temperature 2 46 degC (114 degF) (Core #2)
Temperature 3 48 degC (118 degF) (Core #3)
Temperature 4 51 degC (123 degF) (Package)
Voltage 0 1.30 Volts (VID)
Voltage 1 +0.00 Volts (IA Offset)
Voltage 2 +0.00 Volts (GT Offset)
Voltage 3 1.20 Volts (LLC/Ring)
Voltage 4 +0.00 Volts (System Agent Offset)
Power 0 25.65 W (Package)
Power 1 15.02 W (IA Cores)
Power 2 n.a. (GT)
Power 3 10.63 W (Uncore)
Power 4 2.51 W (DRAM)
Clock Speed 0 3099.28 MHz (Core #0)
Clock Speed 1 3099.28 MHz (Core #1)
Clock Speed 2 3099.28 MHz (Core #2)
Clock Speed 3 3099.28 MHz (Core #3)
motherborad is an asus h97 plus
Chipset
-------------------------------------------------------------------------
Northbridge Intel Haswell rev. 06
Southbridge Intel H97 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 16 GBytes
Channels Dual
Memory Frequency 799.9 MHz (1:6)
DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Corsair (7F7F9E00000000000000)
Size 8192 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number CML16GX3M2A1600C10
Manufacturing date Week 24/Year 12
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes
XMP revision 1.3
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 5.0-5-5-14-19 @ 380 MHz
JEDEC #2 6.0-6-6-17-23 @ 457 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 666 MHz
XMP profile XMP-1600
Specification PC3-12800
Voltage level 1.500 Volts
Min Cycle time 1.250 ns (800 MHz)
Max CL 10.0
Min tRP 12.50 ns
Min tRCD 12.50 ns
Min tWR 28.75 ns
Min tRAS 33.75 ns
Min tRC 46.25 ns
Min tRFC 260.00 ns
Min tRTP 7.50 ns
Min tRRD 6.25 ns
Command Rate 2T
XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
XMP #1 6.0-7-7-17-23-2T @ 480 MHz (1.500 Volts)
XMP #2 10.0-10-10-27-37-2T @ 800 MHz (1.500 Volts)
DIMM # 2
SMBus address 0x52
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Corsair (7F7F9E00000000000000)
Size 8192 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number CML16GX3M2A1600C10
Manufacturing date Week 24/Year 12
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes
XMP revision 1.3
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 5.0-5-5-14-19 @ 380 MHz
JEDEC #2 6.0-6-6-17-23 @ 457 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 666 MHz
XMP profile XMP-1600
Specification PC3-12800
Voltage level 1.500 Volts
Min Cycle time 1.250 ns (800 MHz)
Max CL 10.0
Min tRP 12.50 ns
Min tRCD 12.50 ns
Min tWR 28.75 ns
Min tRAS 33.75 ns
Min tRC 46.25 ns
Min tRFC 260.00 ns
Min tRTP 7.50 ns
Min tRRD 6.25 ns
Command Rate 2T
XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
XMP #1 6.0-7-7-17-23-2T @ 480 MHz (1.500 Volts)
XMP #2 10.0-10-10-27-37-2T @ 800 MHz (1.500 Volts)
Display Adapters
-------------------------------------------------------------------------
Display adapter 0
Name NVIDIA GeForce GTX 970
Board Manufacturer ASUSTeK Computer Inc.
Revision A1
Codename GM204
Technology 28 nm
Memory size 4 GB
Memory type GDDR5
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1043)
Model ID 0x13C2 (0x853F)
Performance Level 0
Core clock 1088.4 MHz
Memory clock 3505.5 MHz
Win32_VideoController AdapterRAM = 0xFFF00000 (4293918720)
Win32_VideoController DriverVersion = 10.18.13.6881
Win32_VideoController DriverDate = 07/10/2016