Jump to content

SirFlamenco

Member
 View Profile  See their activity

  • Posts

    645

  • Joined

  • Last visited

 Content Type 

Everything posted by SirFlamenco

  1. SirFlamenco
    No, what you said is false. It simply doesn't support it, only MGPU over a bridge. SLI has stopped being developped since the first of january for Turing.
  2. SirFlamenco
    You're very much wrong. The RTX 3090 is the only GPU from Ampere to support SLI. This isn't really SLI though, more like DX12/Vulkan MGPU over a bridge. Even then, there are only 13 games supported, with only 1 having been released in the last year. Turing has dropped actual SLI the first of january, which means no one will code for it anymore. SLI is dead.
  3. SirFlamenco
    You're wrong though, the 3090 really only supports the game listed in this article : NVIDIA SLI Support Transitioning to Native Game Integrations | NVIDIA (custhelp.com) On top of that, since January 1 even Turing isn't getting new SLI profiles.
  4. SirFlamenco
    This thread is 3 years old, obviously I didn't recommend a 2080ti because it didn't exist
  5. SirFlamenco
    I know it’s asking a bit much, but could you both test your downsampling? I would like to know if it’s just an issue with my monitor.
  6. SirFlamenco
    RX 580 8GB, I tested Crysis 3 and Battlefront 2. Do you notice a difference?
  7. SirFlamenco
    Hey! So I have experienced different ways to make my 1080p monitor look better in games, and I stumbled upon AMD's Virtual Super Resolution (VSR), similar to Nvidia's DSR, which is basically downsampling. Now, I enabled it and set my resolution to 4K in games, but I don't see a big difference, in fact, I don't even think I can really see it. So I set my resolution back to 1080p, and instead turned the resolution scale slider to 200%, thus also rendering at 4k, and the difference is MASSIVE. But I am also left to wander, why isn't downsampling giving similar results?
  8. SirFlamenco
    So I have tried to boot in legacy mode but I still can’t boot successfully. I then put in the installation disc, which seems to show up as 2 options : normal and UEFI. When I disabled CSM which make the UEFI/Legacy options dissapear the windows installation disc wouldn’t work. After I put CSM , I boot into the windows setup. The "Upgrade" installation doesn’t seem to work, and the custom is giving me several partitions that all say Windows can’t be installed because the partition is "Microsoft recovery partition" but the disc is GPT. What should I do? Both of the normal installation disc options (UEFI and normal) do that.
  9. SirFlamenco
    Hi! I recently did a clean install on my pc, and everything went well, but I saw I had an outdated BIOS version so I decided to update it using Gigabyte’s Q-flash. Then, something weird happened when it finished. It rebooted 2 times, but couldn’t go to windows and left me at the bios. No biggie, I thought. I took out the usb card for the bios and the windows 10 disc I used for the clean install because I thought I wouldn’t need them. I retried booting to windows but it still didn’t work. I then tried to install the usb card and the disc to give me as many boot options as possible, but all of them only try to boot for 2 seconds and then they come back at the boot menu/bios. I couldn’t resintall windows, and someone told me it’s because windows will not work when the bios is corrupted. So my question is, how do I get to boot to Windows? Were there any automatic backups I could use? Edit : I have a 4tb hard drive with a 32gb optane. I used a 16gb usb drive to install windows. My motherboard is a Gigabyte z370 AORUS gaming 5. Here is a video of what happens when I try to load each boot options :
  10. SirFlamenco
    Sorry for the late response. Windows refuse to be reinstalled and reflashing the bios doesn’t do anything
  11. SirFlamenco
    Hi! I recently did a clean install on my pc, and everything went well, but I saw I had an outdated BIOS version so I decided to update it using Gigabyte’s Q-flash. Then, something weird happened when it finished. It rebooted 2 times, but couldn’t go to windows and left me at the bios. No biggie, I thought. I took out the usb card for the bios and the windows 10 disc I used for the clean install because I thought I wouldn’t need them. I retried booting to windows but it still didn’t work. I then tried to install the usb card and the disc to give me as many boot options as possible, but all of them only try to boot for 2 seconds and then they come back at the boot menu/bios. I couldn’t resintall windows, and someone told me it’s because windows will not work when the bios is corrupted. So my question is, how do I get to boot to Windows? Were there any automatic backups I could use?
  12. SirFlamenco
    It did not, there are unfortunatly no such warranties. I am concsious that cracks expand, The thing is, I had it broken for 3 weeks and it showed no signs of getting worse. When I got it back though, it was fucking massacred and I can't use half of the screen now. I was very careful with it when I transported it. Do you think there is something I could do?
  13. SirFlamenco
    Hi ! Long story short, I unintentionally broke my chg90. I brought it to the store, where they took it for a few weeks to evaluate the damages. When I got it back, they said they didn’t repair it because it was not covered by the extended warranty. Ah well. When I took it home and plugged it in, I saw that they worsened the damages by far. The crack is now two times bigger, and pixel lines are appearing on the sides. I have a photo of before and after. Has anyone been in similar situation?
  14. SirFlamenco
    Well basically what happened is that it sent me to the Bios, probably because it couldn’t boot correctly. I then tried to do it manually but here is what happens. I have a 4tb hard drive with and optane 32gb. C9E92AA8-E86E-4587-AF14-5B04A5C9B352.MOV
  15. SirFlamenco
    I honestly don’t know. My motherboard is a Gigabyte gaming 5 z370. Was the backup automatic though? I don’t remember saving anything. (Edited the post. Hope it’s easier to understand now.)
  16. SirFlamenco
    Hi! I recently did a clean install on my pc, and everything went well. Then, I saw I didn’t have the correct BIOS version so I decided to update it using Gigabyte’s Q-flash. Then, something weird happened when it finished. It rebooted 2 times, but couldn’t do it and left me at the bios. No biggie, I thought. I took out the usb card for the bios and the windows 10 disc I used for the clean install because I thought I wouldn’t need them. I tried booting from the bios but I couldn’t do it. I then tried to install the usb card and the disc to give me as many boot options as possible, but all of them only try to boot for 2 seconds and then they come back at the boot menu. The installation disc still works for reinstalling windows but this is obviously not an option I want. So my question is, how do I get to boot in Windows? Were there any automatic backups I could use?
  17. SirFlamenco
    Yeah I did.. If you don’t have any relevant answers don’t post memes on a support thread.
  18. SirFlamenco
    I left my computer for a few hours, and when I was back it was updating. When it finished, I logged in but I was met with a black screen and a small window saying that windows explorer is not responding. I can still move my mouse and do ctrl-alt-delete. Any help? Thanks
  19. SirFlamenco
    I tried to install battlefield 4 and its dlcs today, but it seems like at the stade of finishing, (so when it’s after 100%) it says error 327684:1, with something about directx. I installed battlefield 1 a few minutes before, and everything was fine. Could someone please help? I have other games in queue and it doesn't work with them either, but I really don’t want to loose hundreds of dollars. Edit : Tried running it as an administrator and reinstalled it, doesn't work
  20. SirFlamenco
    I took those from speed test lol
  21. SirFlamenco
    11 up, 68 down
  22. SirFlamenco
    So when I download games from steam and origin, the speed is about 8mb/s and I find that quite slow. Is it normal? Optane : https://www.newegg.ca/Product/Product.aspx?Item=N82E16820167427&_ga=2.104614403.2069759329.1524261805-986710944.1518379736 My hard drive : https://www.newegg.ca/Product/Product.aspx?Item=N82E16822179009&_ga=2.109651590.2069759329.1524261805-986710944.1518379736
  23. SirFlamenco
    Hi So I set a certain download to open with an app that is incompatible (yea I'm dumb) but now that I have the correct program to open it (WinRAR), I want to change actually open with WinRAR. How can I do this? Thanks!
  24. SirFlamenco
    Well I reinstalled Windows without a USB drive, and now I am running the latest version. Taskbar isn’t working though, and I am in the process of returning back to the previous version.
  25. SirFlamenco
    Yea I put « disableantispyware » and set the value to 1 but today I deleted the entry. I can’t reinstall Windows though, it won’t let me. Also, I can’t update, it’s stuck at 25%. My guess is that it’s related to windows defender not working properly.
×