-rascal-

Yup 👍
 
I think PCPartPicker made a mistake.
 
The motherboard has:
 
The case has:
1x USB 3.2 Gen 2x2 (e.g. USB-C) cable 1x USB 3.2 Gen 1 cable
You shouldn't need an adapter...

Essentially, yes.
A higher-end Gen3 or Gen4 SSD with more storage over a Gen5 SSD with lower capacity.
Also, Gen5 SSDs can run HOT when you push it. Gen3 and Gen4 typically runs cooler. 
 
Checking local pricing for me...
A Gen5 Crucial T700 2TB is $529, the 4TB model is $899.99...
Gen4 WD SN850X 2TB is $234.99 and 4TB is $434.99
Gen4 (tier below the SN850X) WD SN770 2TB is $189.99...

Yup 👍
 
I think PCPartPicker made a mistake.
 
The motherboard has:
 
The case has:
1x USB 3.2 Gen 2x2 (e.g. USB-C) cable 1x USB 3.2 Gen 1 cable
You shouldn't need an adapter...

If you are just chasing for faster load times, going from Gen3 -> Gen4 -> Gen5 is not going to be noticeable faster.
Going from HDD -> any form of SSD (even a SATA3 SSD) is a VERY significant change.
 
In the chart @Electronics Wizardy linked, the Crucial T700 is a Gen5 NVMe SSD. The WD SN580 is a lower-end Gen4 NVMe SSD. The difference is 0.9s.
You are not going to see... 33s vs 5s.
 

List is set to private; we cannot see it.

Compared to a good Gen 3, no. Heck, a I've yet to notice a difference between a high end SATA SSD and a high end Gen 4 drive, let alone a Gen 3 and a Gen 4. Gen 5 drives are in an entirely different league of performance, but since nothing the average gamer does actually uses the extra bandwidth of the Gen 5 drives, they're rather pointless. 
 
For data center and other production workloads that actually use 12+GB/s of read bandwidth, they're a godsend, but for a gaming PC, they're overkill for no noticeable benefit. It's like getting a Ferrari just to head to the grocery store, it serves no real benefit and you would be much better off with something cheaper and more practical. 

If you are just chasing for faster load times, going from Gen3 -> Gen4 -> Gen5 is not going to be noticeable faster.
Going from HDD -> any form of SSD (even a SATA3 SSD) is a VERY significant change.
 
In the chart @Electronics Wizardy linked, the Crucial T700 is a Gen5 NVMe SSD. The WD SN580 is a lower-end Gen4 NVMe SSD. The difference is 0.9s.
You are not going to see... 33s vs 5s.
 

List is set to private; we cannot see it.

I've tried EK's opaque / "Sold White" coolant in the past -- once.
It didn't clog the CPU block, etc, but the pigments did fall out of suspension.
It looks like they eventually got it sorted out, according to people online.
 
Used their Cryofuel Clear concentrate (with the occasional use of their dyes) and so far, no issues since I started water-cooling in ~2016(?).
 
Absolutely agree though, their pricing has shot up over the years.
I'm running a full EK loop right now, but may really look into Alphacool (or other alternatives) products now.
Getting things shipped to Canada isn't cheap - even through the resellers / retailers in Canada, rather than direct.

That top left screw at least doesnt look like its providing any tension on that bracket unlike the one beside it which seems to be providing at most adequate tension, you wont be any to get nearly enough torque by finger tightening, you need to tighten with a screwdriver

I'm confused...why do you need to ADD a separate WiFi card, then the ASUS Prime-B760M-A AX COMES with a WiFi + BT combo??
It has the antennas included with the motherboard...
 
The WiFi card won't work because it is a different M.2 key type.
The motherboard supports M.2 Key M only.
The WiFi card is M.2 Key E.
 

I've tried EK's opaque / "Sold White" coolant in the past -- once.
It didn't clog the CPU block, etc, but the pigments did fall out of suspension.
It looks like they eventually got it sorted out, according to people online.
 
Used their Cryofuel Clear concentrate (with the occasional use of their dyes) and so far, no issues since I started water-cooling in ~2016(?).
 
Absolutely agree though, their pricing has shot up over the years.
I'm running a full EK loop right now, but may really look into Alphacool (or other alternatives) products now.
Getting things shipped to Canada isn't cheap - even through the resellers / retailers in Canada, rather than direct.

I was about to purchase over €1000 of custom loop parts from them in just 2 weeks at the beginning of May to start my custom loop build, but with that news breaking out i no longer have the desire to do so. The question about warranty coverage (if the company sinks) aside, there is the bad taste of sliminess in doing business. But they were so good for so long, that i can't help but wonder if some of their competition sabotaged them by having a mole in the higher management positions. Someone deliberately kept their policy of outsourcing manufacturing instead of having it inhouse. You can't simply miss the ever increasing numbers of the expenses. You either have to be a complete and actual idiot to not see the trend when looking at the graphs or you do it on purpose to sink the company. 
 
As for the US vs EU office - sadly this kind of interactions is not that uncommon. Most EU offices really see the US offices as lazy, because of the difference in the work flow scheduling. The 9 - 5 day with 30min or 1 hour launch break in that time is more like 8 - 5 in Europe. Some companies and offices (mainly the tech ones) have the practice of including the commute to and from work in their work hours, which is ok in the EU where you simply hop on a train, a metro, a bus or even if you drive a car and you are rarely more than 10-15 minutes away, but many people in The US spend an hour or more each way, which when added as an overtime to the already seen as the lazy 40-hour work week, pisses off not only the managers, but the rest of the employees as well. My current employer doesn't include the commute in the work hours, BUT we get the fuel paid based on the average consumption of our cars and the distance to and from our workplace which is a compromise everyone is happy with.

Clock speed isn't that important, what matters more in this case is how much work it can do per cycle. A 12100F can do more work per cycle than a 6600K, even with that clock speed deficit.
 
That's why a 3.4GHz Pentium D can get absolutely curbstomped by a 2.4GHz Core 2 Duo.

There is a purpose behind the lower and higher end variants of the same GPU.
These are both RX580’s


 
The purpose is more than an aesthetic preference. Better cooler designs, heatsink coverage, pcb design occasionally. That can all translate to slight differences in performance related to thermals and power delivery. And this applies to basically any GPU, and can vary wildly depending on the cards. Nearly every 1050ti ever made will perform almost the same with the exceptions of the single slot ones, sometimes.
But there are 3090’s that range from power limited 2 slot blower cards to cards with a 20% factory OC, 4 slot hybrid air/water cooling and power delivery adequate for liquid nitrogen overclocking. Still both 3090’s, but wildly different performance.

Crucial P3 Plus or any of the other Gen 4x4.
 
No need to spend Pro money on a secondary drive, especially when you were using a shit HDD as secondary for the longest time.  Don't sell the Corolla and get a Ferrari.
 
There is no real world benefit to gamers for expensive PRO level drives.

PCPartPicker Part List
CPU: *Intel Core i7-12700F 2.1 GHz 12-Core Processor  (£219.99 @ CCL Computers) 
Video Card: *Zotac GAMING Trinity GeForce RTX 4070 Ti SUPER 16 GB Video Card  (£777.98 @ Overclockers.co.uk) 
Total: £997.97
Prices include shipping, taxes, and discounts when available
*Lowest price parts chosen from parametric criteria
Generated by PCPartPicker 2024-04-09 02:42 BST+0100
 
PCPartPicker Part List
CPU: *Intel Core i7-12700F 2.1 GHz 12-Core Processor  (£219.99 @ CCL Computers) 
Video Card: *Sapphire PULSE Radeon RX 7900 GRE 16 GB Video Card  (£537.96 @ Amazon UK) 
Total: £757.95
Prices include shipping, taxes, and discounts when available
*Lowest price parts chosen from parametric criteria
Generated by PCPartPicker 2024-04-09 06:31 BST+0100

Neither of these support overclocking, so nothing to do here.
 
This is a bit more weird. If you're going to overclock an AMD card, I'd recommend you use either Wattman (this is included in the AMD driver) or MoreClockTool. Assuming you're using Wattman, open up AMD Adrenalin, go to the performance tab, then to tuning. Click Manual Tuning Custom, and this is where you can mess with all the settings. First thing to do would be to max out the power limit as RX 6000 series cards tend to be pretty power limited in my experience. Next would be to tune the VRAM, where you want to change the timings to fast, set manual control, then max out the slider (AMD artificially limited the memory slider on all cards but the 6900 XT/6950 XT, to the point where almost every card can max out the memory slider). Finally, tune the core. Raise the max frequency until the card starts to crash in a stress test (I personally just run Time Spy, but everyone has their own preferences) or until the clock speed stops improving, then raise the minimum frequency until it starts to crash. Test a bunch of games to make sure it's stable, and you're done. 
 
Another thing you can do is use MorePowerTool to effectively disable the power limits of that card, that can get you a few extra percent of performance, though I'd reserve that for more in the future. 

The Intel 9400F can't be overclocked as its locked.
The Radeon RX 6600 however can be overclocked!
 
This is a very easy to understand guide on how to overclock with MSI Afterburner ( You dont need an MSI card )
Watch it fully if you are new to overclocking. AMD specific at the end.
 

Literally took 45 sec to find the manual and the page.

its not even joking about sexual harassment. It isn't even implied in the joke. 

The joke is not getting away with harassment and using drinking as an excuse to get away with it. 
being promiscuous is NOT harassment. Unwanted/unappreciated advances is harassment. 

Calling something out that is not an harassment joke, as one also trivializes the term in highly damaging ways. 
Like I said, I'm often the first to call out these types of behaviors from people, I am as feminism-pilled as you can get without out going into radicalism.

Both the BIOS are the same.
One acts as a back-up, in case your corrupt the other one...either through modding the BIOS or some other freak accident.

Both the BIOS are the same.
One acts as a back-up, in case your corrupt the other one...either through modding the BIOS or some other freak accident.

I recently did a test with Cyberpunk on my R9 5900x, by taking cores online/offline. Yes, it does scale all the way up to 12 cores/24 threads. And there was a noticeable difference between 4 cores to 6 cores. But beyond that, it didn't really benefit all that much.
 
~edit: managed to find the results I posted. Primary gain is minimum fps, but average and max stays largely unaffected
 

Uhhhhh, have you edited off a HDD? If not, you really need to try out your workflow before dropping cash on it. 
 
 
You're reading the specs wrong. It's SATA 3.0 compatible which is a connection that has an up to 6Gb/s that's bit not byte) so capable of moving about half a gigabyte a second. But the fact that it's an HDD means that it will top out at ~1Gb/s sequential reads or 100MB/s
 
As for a games library? Yeah, an external HDD is gonna be fine. Might slow down some loading times a bit, but it should be fine. Though I'd maybe recommend not just keeping all your games installed at all times. Unless you're on a brutally slow (<50Mbps) internet connection in which case, sure, but most connections are at least 100Mbps.

I think the important questions here is: Are you a fully professional content creator? Is that your primary source of income?