FlushaDev

What can I do?

This is what I get turning off the LN2 Bios -> https://www.techpowerup.com/vgabios/222912/222912 There's a button you can hit to switch to LN2

Hold on, give me a minute or two and I'll report back, that's cause maybe I have the LN2 BIOS on which is I think meant for nitrogen cooling lol

After I submit this is what I get -> https://www.techpowerup.com/vgabios/181157/181157

Got it, doing it after I finish my game, will report back

Mind sending some post explaining how to do that? Yeah confirmed I have bought it used

Pretty sure the card was made for it since it has the fanstop thing on it's cooler https://www.gigabyte.com/Graphics-Card/GV-N98TXTREME-6GD

Mind sharing how I could check? I kinda don't remember how, also quoting something I said above, the card used to work find for some days after I got it, it's used to maybe, this card has 2 BIOS options I have the LN2 but it makes no difference it kinda just locks the colors of the GPU so they can't be changed. Yes I have tried turning them off without the LN2 Bios

I've had this GPU for about a year now, it was doing fine in the beginning but I didn't dig too much into it, the fan stop feature wouldn't work so I gave up on it and had my fans on 20%, now that I have the AC on the card stays way cooler so I want my fans to turn off and they JUST DON'T. I've used the XTreme Engine still nothing, Afterburner still the same, it just doesn't turn off. Do I need to DDU or have we got any other solutions?

It's a Gigabyte Windforce 980Ti

I reseated the GPU and reconnected the power cables, I forgot to ask but there's an extra 6pin connector on the side of the GPU, it's used for OC I'm pretty sure, does that have to do with anything?

They were part of a kit, a Corsair LPX kit

I've seen people with the same GPU run games easily at this res. Yes the GPU is on the PCi-E 16X slot, I'm thinking of reseating it and just cleaning in general while I reseat the power cables 2x16GB DDR4-2666MHz using DOCP and 2933MHz

Quick note: I've played fallout 4 for a while with stock clocks and all, CPU Temps were around the mid 40s GPU were somewhere in the 70s but usage was still below 60% and was giving me drops below 60fps in the low 50s... what could be wrong

Played Hitman 2, the settings are attached, GPU Usage stuck under 50%, temps were fine under 60% but fps were in the low 40s and high 50s, it was a demanding mission with lots of NPCs and things going on

I'll run it on stock for 10-20 minutes no OC no UC and is hitman 2 or fallout 4 gonna do the job or no

Hello again, DDUd the drivers, installed the latest ones, ran a furmark at 1360x768 with 8xMSAA and got AVG: 65-70fps with +150Mhz Core clock and +420 at memory clock, is that good or should I keep testing?

Sure thing

Doing it now. I'll keep you updated mate

What other things can I check? I mean I didn't change any drivers after I swapped my 970 out

Hello everyone I was using my old graphics card on my current backup monitor which was a GTX 970 and I was getting higher FPS in most games in my monitors resolution which is 1360x768. For example when I was playing the game Dishonored I was getting 60 FPS with Vsync on on and it was not going under 60fps. After I upgraded to my GTX 980 Ti I jumped back on dishonored since it is the game I try to master at the moment and was getting frame drops down to 50fps sometimes even in the 30s. I would like to ask the community if someone else has experienced this problem and if they have found a solution I was thinking of doing a DDU but I wanted to ask here first. GPU is in gaming mode with stock clocks and temps are in the 50s, also running a ryzen 5 2400G with 32GB RAM Thanks!

As said above, I have found out that it's only the 2nd one which when rebooted fixes itself for some time, and all of the routers are being used as APs.

The 2nd one that's not in my room is receiving internet from the downstairs one which is ISP provided, and the 2nd one is being used as an AP with DHCP enabled, what should I change in this case?

First one is what my ISP provided me and it works fine, I can confirm that. 2nd one is the probably the troublemaker which is a netis router that's served me well for the past 2 years or so, but it was placed in another location in the house and the third one is a tplink archer c50 model

They are basically WiFi..ing the house, modem is downstairs for the kitchen, 2nd one is for upstairs parents' bedroom and living room, and 3rd one is for my bedroom PC and brothers, it is all wired through the wall with HQ ethernet cable