SpOoOoKy

Here in Europe the electronic prices are way more expensive than in USA . And there are no discounts for PC components. Anyone know an US site who has good prices like newegg and ships in Italy ? Thanks anyway. And other sugestion are more than welcome.

I usually use this site: http://www.risparmiodigitale.com/ or this http://www.mrelettronica.it/home.html Thanx again

Thanks for all the answers. You have been very helpful. I'm going for the GTX 760 as your advices and becouse i'm more for nVIDIA . The ASUS DC2 is discounted , so the cheapest, and have good cooling solution. Any other advice for my build? - i5-4670K. - ASUS z87-A. - Cooler Master 212 Hyper EVO.+ X2 Corsair Air Series SP120 High Perf Push-Pull (45 Euro). ( Any budget water cooling soltion like: - Anteck 620 (45 Euro ) or - Corsair H55 (50 Euro) that can push the i5 to about 4.5GHz? Dont know if will benefit in any aspect ) - Kingston HYPERX 2x4GB 1600 CL9. - HYPERX BEAST 2x4GB 1600 CL9. ( Same price but maybe have prolem with the 212 EVO ) ( Maybe i will take a single 8Gb and add later an other 8Gb ) - Corsari CX600. - Cooler Master Thunder B700. - OCZ ModXtream PRO 600W. (Dont know if its compatible with Haswell.) (I'm not planning to go in SLI) - ENERMAX OSTROG ECA3250-B. - ENERMAX OSTROG ECA3253-WB. - CORSAIR CARBIDE SERIES 200R (My choise) - ZALMAN Z9-U3. - And of course the ASUS GTX 760 DC2. Thanks again.

I need help assemblin a new PC. i5 4670K + ASUS z87-A + Corsari CX600. I will use it esclusivly for Sketchup and Lumion 3.0 (NO GAMES). Since Sketchup use only the CPU i was thinking to overclock the 4570K to 4.2 max 4.5 MHz Coller Master Hyper EVO in Push-Pull whith 2 Corsair Air Series SP120 High Perf. 2350 rpm, 35 dBA (CO-9050008-WW). The noctua are MORE expensive! Lumion 3 use only the GPU. http://lumion3d.com/forum/f-a-q/lumion-2-minimum-hardware-requirements/ http://www.videocardbenchmark.net/high_end_gpus.html My question is: GTX 660Ti (1344 CudaCores / BusWidth 192-bit ) 185 Euro 760 (1152 CC / BW 256-bit ) 200 Both ASUS DC2 2GB http://www.hwcompare.com/14802/geforce-gtx-660-ti-vs-geforce-gtx-760/ http://gpuboss.com/gpus/GeForce-GTX-760-vs-GeForce-GTX-660-Ti I don't understand what will benefit more the renderdering time of Lumion 3. Is better to have more CudaCores or BusWidth? More Cuda Cores +192 of the 660Ti or More Bus Width +64 of the 760. Will i see benefits if i spend 15 Euro more for the 760 for the +64 Bus Width but less -192 Cuda Cores or is better the 660Ti that has more + 192 Cuda Cores but less Bus Width -64? So the question is: (+192 CC ; -64BW) 660 Ti vs 760 (-192CC ; +64BW ) +15 Euro? Considering that the 670 ( 250 Euro ) is out of my budget? Thanks.

Help! I'm assembling a new Haswell PC exclusively for rendering in Lumion 3 and i have some doubts. I'm planning to associate a GPU with a i5-4670k and overclocked to 4.2 / 4.5 GHz. GTX 660Ti (1344 CudaCores / BusWidth 192-bit ) 185 Euro 760 (1152 CC / BW 256-bit ) 200 670 (1344 CC / BW 256-bit ) 255 All have 2GB of memory. The 670 is a little out of my budget. Whictch is more imposrtan for the render time in Lumion? Cuda Cores or BusWidth or other factors?? Thanx