Jump to content

ZeroCool22

Member
  • Posts

    15
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ZeroCool22's Achievements

  1. I'm doing an Undervolting and following this guide https://www.youtube.com/watch?v=dU5qLJqTSAc to correctly identify what core fails when i get an error, so go the Event Log and take the value to modify it till goes stable. But i would like to do it from Ryzen Master so i don't need to restart and enter the BIOS each time. But comparing CPU-Z and RM, one of them start counting cores from 0 and the other one from 1. So lets say Thread 3 givean error, which CORE will be: 1 or 2 in Ryzen Master? Thx.
  2. Yeah, it gets applied without problem and i tested it a lot, letting the PC just IDLE, Gaming, rendering, etc... no crashes. But message there is still a little annoying.
  3. I already have my Profile and it works fine, but every time i click "Apply & Test", that message pop up. Also my PC never crashed, i don't know why that message comes out...
  4. I want to Update the AMD Chipset Drivers and also the Ryzen Master to the last version to try out the new Curve Optimizer feature because i feel a lot more safe doing it here than in the BIOS because RM not do any permanent change in the BIOS until you apply them again, i don't care to open RM and apply the profile again with every reboot. If yes, i should uninstall all of them in the order they appeared?: And for the last, i should uninstall RM before uninstall the Chipset Drivers? My current UV config in RM i have been using for months without problems: And CTR results: Thx in advance.
  5. I want to go for the UNDERVOLTING (not interest on OC) summer is coming here, so i want to get the best Temps i could without loosing much performance. So based on this results: Voltage: 1000 mV Frequency: 4100 Mhz 1- With that values i will lose too much performance? 2- Also that Frequency will be the MAX or the CPU will still can turbo to 4.8 Ghz? 3- And finally, i know now i should put this settings and RUN the TUNE, but I'm a little afraid if the TUNE process could damage the CPU... PD: I will not use the CTR Profiles, one time i get the stables values for the IV i will use Ryzen Master. Thx in advance.
  6. I will try to describe my problem the best i can... I recently did an upgrade: ASUS ROG STRIX B550-F GAMING (WIFI) RYZEN 9 5900X COOLER MASTER MASTERAIR MA610P RGB 2X16 3000 MHZ CORSAIR VENGEANCE RGB PRO MSI GTX 1080TI 11GB GAMING X WD BLACK 4TB WD BLUE 1TB AEROCOOL KCAS 700W FULL RANGE Everything is new, except the 1080 TI and HDD's/SSD's. But the 1080TI and the HDD's/SSD's are fine, i did benchs and tests and everything is ok. The problem is i feel the system a little sluggish like with micro stuttering, and the worst part is when i use Air Explorer (a program for Download/Upload file from different host like Google Drive). When i use Air Explorer and play games, i get FPS Drops every x minutes. If i not use AE games runs fine. And i'm downloading to a different disk from where the Win is installed. Things i already tried: Old and new versions of Win 10. Old and latest BETA BIOS. All Chipset Drivers are installed and are the latest versions. Different power plans. There is NO conflicts/problems on the Device Manager. Still the same result/problem. *I must say in my old INTEL system, an I7700K + Msi Z270 Gaming M3 never had this problem, i could leave Air Explorer downloading/uploading things and play games without any problems. And we are talking about Single Player/Offline games , not Multiplayer, just in case. I can't believe i have this kind of problem with this beast of CPU, multitasking with AE an playing a game should be a piece of cake... I'm really close to sell this CPU + Mother and switch to an 10900k + a new Mother. I regret so much for not listening my friend who told me: "if a was you, i would go for the 10900k, AMD have lot of problems with incompatibilities..." Also what's this damn glitch on the Resource Manager slider?: I tested it on my old 3770k and didn't do that...
  7. OK, man very thx. I will take then the Savages mems they offer me (2x8), and hope this time with the XMP feature i don't have all this problem and can run the mems at 2133. Because u know it sucks to pay for something that u can't use at 100% like should be. I go for the first mems because i was too confident that Kingston will have a XMP feature (that's almost on all other mems manufacturesrs) on a 1866 mems too, but i got a very bad surprise when discover it not.
  8. Yeah i know, but after trying it i got the same results, PC don't boot, and need to press "MemTestOK" button and then it reboot and set mems to 1600 again. I think only modifying the timings is not enough (if u search about XMP for mems speed that need an O.C, the profiles modify more things than only timings). If this damn mems had an XMP profile all this would be more easy, but..
  9. Thx for reply, i was afraid because i read setting it above 1.5v could be dangerous for a Ivy Bridge. Also u think maybe the Motherboard could be a problem or the fact that an i7 3770k is mean for 1600Mhz max mem only?
  10. After talking again with my vendor and tell him about this, him offer me a a 8 GB DDR3 2133 HYPERX SAVAGE that have XMP but also i read for XMP Profile #1: DDR3-2133 CL11-12-12 @1.6V and the 3770k i think don't support that voltage, so i will screw more my situation if i accept that memories right? Memory specifications: http://www.kingston.com/dataSheets
  11. I just bought 2 modules of Kingston Hyperx Fury Ddr3 8gb 1866mhz to make DUAL CHANNEL, and for my surprise those don't have the feature "XMP" (for auto O.C and not need to touch timings, voltage, manually), instead this are Plug&Play memories. If i had know this memories don't have XMP i had bought another ones. If i change the memory Frecuency in BIOS to 1866 without changing any other option, the PC don't BOOT and i need to press "MemTestOK" button in the mother and this will boot again but with the memories set at 1600Mhz. My mother and CPU: i7 3770k ASUS P8H77-V https://www.asus.com/Motherboards/P8H77V/specifications/ 4 x DIMM, Max. 32GB, DDR3 2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1800(O.C.)/1600/1333 MHz Non-ECC, Un-buffered Memory Dual Channel Memory Architecture Supports Intel® Extreme Memory Profile (XMP) Exact model of the memories and features, voltages, etc..: So since this fuckers don't support XMP i guess i will need to do all the changes manually but i don't know the corrects values, here some screens where i need to make changes but don't know what number put in: Timing values? Looking at the memories description in the image i post above then i should put it: CAS LATENCY 10, RAS TO CAS DELAY 11 y RAS PRE TIME 10? And this part is the most hard: BCLK/PEG FRECUENY and BUS SPEED 100:100, 100:133 or AUTO. And for last, about DRAM VOLTAGE i should leave it as it's now 1.5 since in the memory page said it's the value of testing. I can't belive a really famous company like Kingston don't have the XMP feature in this memory, what a shame! I go for the Kingston because i think, i will not have any problems with those because hey those are Kingston!, but surprise no XMP.
×