JoeAguiar

Thanks for your explanation, i don't wanna raid them either, was a question that i had since i own this board and i didn't knew what the behavior would be because i always saw different opinions.

the thing is everybody says it will get bottle necked when the first disk gets full, but for me it doesn't makes sense.

Hi, i have a asus x470 gaming f and 2 samsung 970 evo plus 500 gb each. One of my motherboard m.2 ports is pci 3.0 x4 and the other one is pci 3.0 x2. If i raid 0 them will what speed will i get? I know nowadays there aren't many benefits from raiding nvme ssd's but i would really like to know how this will work. Will i get 3 GB/s readings or will i get bottle necked by the second disk? I already tried it myself and i got 3 GB/s in raid 0 ( the same as 1 pci 3.0 x4 disk) but from what i read online i should be getting much lower speeds.

is your pump running? If the radiator is barely warm to the touch with the cpu at 91ºC it either could be a bad mouting or the pump is broken. In wich header is it connected?

with sata i meant ahci, the board is compatible with nvme in both slots

Hi, i have a asus x470 gaming f and 2 samsung 970 evo plus 500gb. I am using one for boot and the other for games that i like to fastload. The main one is running at pcie 3.0 4x and the second on pcie 3.0 2x. Should i use them in sata, and use the boot one at 3gbps and the one for the games at 1gbps? Or should i raid them? Will i get 3gbps? I used to raid them and in the benchmarks i used to get 3gbps but to me it doenst make sense.

Hi, i have a Rysen 2600 and recently i bought a pc for parts and it comes with a fully functional Rysen 2700. For gaming, mainly Read Dead Redemption 2, Need for Speed Heat, and FPS like Rainbow Six Siege and CS GO, wich one shoud i stick with and wich one should i sell?

Hi guys, i have a asus x470 gaming f, a 500 gb nvme ssd, a 1 tb hdd and a 120 gb ssd acelarating the hdd with the storemi software. I want to add another 500 gb nvme disk in raid 0, but when i select raid in the mobo settings the hdd just doesnt show up on windows. Im i doing something wrong?

Hi, i bought a MASTERLIQUID ML360R RGB and i have a asus x470 gaming f. I have 3 fans connected to cpu_fan and the other 3 to the cpu_opt. Where should i connect the aio pump? i have 3 fans pushin air from autside to the radiator and 3 pulling from the radiator to the inside.

No problem, glad i could help .Mark my answer as solved so it doesn´t show on the threads as unsolved.

If you play competitive shooters go with the 144hz one, if you want a imersive gaming experience go with the 21:9

They are very similar, for looks i would get the one with the R5 but in benchmarks the I5 wins, but then again, benchmarks dont always represent daily usage. Will allt the specs in mind, get the R5. Bigger and better screen, ddr4 ram and it doesnt look so fragile. If you can use all of the 1000 dollars buy this one https://www.amazon.com/Acer-Predator-Overclockable-Aeroblade-PH315-51-78NP/dp/B07CTHLX8C/ref=sr_1_1?fst=as%3Aoff&qid=1566019946&refinements=p_n_feature_seven_browse-bin%3A18107821011&rnid=3012494011&s=pc&sr=1-1

If i was you i would get the Asus VivoBook with the 1050

I think that one its an nvme. I was building a build for a friend of mine and his motherboard only supported nvme m.2 disks. Also have you updated your bios?

Hi, what's your disk?

Have you reseted you settings after you noticed those artifacts?

I will keep 3 of them screwd to the case, and then I will mount the radiator with the other 3 fans on the back(facing the ram sticks) or at least that's what I'm trying to go for

So i connect the fans and the pump to the cm controller, then connect it to a usb header and then the aura pick it up?

I wast sure if it would even have spots to screw in. Its my first time installing or even using a AIO

Hi, i have a coolermaster master box lite 5 and im going to install a cooler master ml360r on it. Can i use the 3 fans included in the Case on the front, and mount the other 3 on the back of the radiator or is it just dumb? I was thinking of doing it for looks, i already saw that the performance gain wont be noticible.

My mobo has a ARBG header, it is a 5v. I dont really understant coolermaster, they say it is compatible with aura sync but they dont say if i need to use the controller from coolermaster or just plug it into the header on the mobo. Am i dumb or is there a lack of explanation from them? Anyways i just want it to be static red xp

Hi, have an asus x470 gaming f and i bought a cooler master masterliquid ml360r rgb liquid cooler. My question is, how can i make it be recognised by aura sync? Do i connect the ARGB cables into the ARGB header or do i use the inlcluded controller, and then the Aura will show it up?

COOLER MASTER 650W MASTERWATT 80 PLUS GOLD FULL MODULAR

the only thing im concerned about is the 56 being now 2 years old

Im aiming for playing at 1080p at 144hz, the price are about the same of both cards here in portugal. I majorly play rainbow six siege i currently have a i7 4790, 16gb ram 1660mhz, and a 650w powersupply from coolermaster