-
Posts
7 -
Joined
-
Last visited
Reputation Activity
-
Perfectguns reacted to troubleis in The Water Cooling Gallery
Project Nightmare
CPU: Intel 8700k
GPU: Asus 1070 Dual
RAM: 4x8gb G.SKILL Ripjaws V Series
SSD: 512GB Samsung 970 Evo NVMe
Mobo: Asus ROG Maximus XI Code Z390
PSU: 850w Corsair RM850X
Case: Silverstone TJ07 (Acrylikustom mod panels)
Cables: CableMod Pro ModMesh C Series
CPU Block: EK Velocity D RGB GPU Block: BYKSKI
Pump: XSPC D5 PWM SATA Pump
Reservoir: Singularity Computers Protium Reservoir 200mm
Radiator: XSPC RX480
Tubing: BYKSKI Metal Tubing 14mm
Fittings: XSPC 14mm Chrome
Coolant: XSPC EC6 Opaque UV Blue
Fans: Corsair ML120 Premium Magnetic Levitation Fan x6
-
Perfectguns reacted to SaviorSelf_666 in The Water Cooling Gallery
Tried my hand at hard tubing. Was not as challenging as I thought. Also picked up a new case and some rads.
-
Perfectguns reacted to pecosROB TTV BTW in The Water Cooling Gallery
Note: I need to re-take these photos now that the coolant is 100% bubble free! I've also added sleeved black cable extensions for the gpu and motherboard so it looks a bit better.
This was my first try at hard tube water cooling. Before this I was using an NZXT h500 Vault Boy edition with a Corsair h115i RGB Platinum (280mm) for my CPU (great cooler by the way). Figured a bigger case would be more helpful (plus more radiators), so I chose the Lian Li O11 Razer edition.
Bitspower Leviathan 360XF & EK CoolStream PE 360 radiators, mostly EK fittings and about 5 from Bitspower. Tubing is a mix of Bitspower and EK 16mm OD. Front panel is from Bitspower - the Sedna O11 front (pwm). GPU > Leviathan > CPU > EK PE > water block. Idle temp for GPU and CPU is 33C and 37C with fluid temp of 30-31C. Under full load for 1.5-2 hours fluid temp is around 41-42 and GPU and CPU temps about 57C for both.
9700k, 2080 founders, maximus xi hero wifi (y'all can figure out the rest I'm sure), and Corsair LL120 RGB fans. fluid temp sensor is Bitspower Touchaqua (only shows fluid temp, not flow rate). The power plug is so much better than the huge one from the Thermaltake sensor that has flow rate as well.
-
Perfectguns reacted to Owen Chief in The Water Cooling Gallery
Witcher keycap finally came yesterday to complete the rig lol
-
Perfectguns reacted to Knuxz in The Water Cooling Gallery
Copied and pasted the specs from Instagram so I didn't have to type it again. Wiring isn't completed at this time. Hooked it up quick to run some benchmarks and ensure everything was working properly. Thanks all!
First time poster, long time LTT fan.
Hardware:
- @amd Ryzen 3950x
- @asrock_official x570 Aqua
- @hyperx Predator 32 GB 3600 CL17
- @asus @rog_na Strix 2080 Ti OC Edition (x2)
- ASUS ROG 3 Slot Bridge
- @teamevga 1300 G2+ PSU
- @kingstontechnology KC2000 NVMe 1 TB (x2)
- Kingston UV500 SSD 2 TB (x3 in raid0)
- @phanteks Enthoo 719
________________________________________________________
Watercooling:
- @ekwaterblocks FLT 360 Pump/Res
- EKWB Quantum Strix DRGB Blocks (x2)
- EKWB Nickel Backplates
- EKWB Torque Fittings, Nickel
- EKWB 360mm Radiator SE
- EKWB 360mm Radiator XE
- EKWB 480mm Radiator SE
- EKWB Electric Purple Cryofuel - 16mm OD Hard Tubing PETG
- @noctua_at Chromax NF F12 (x10)
- Noctua Chromax NF F12 IPPC 3000rpm (x3)
- Noctua Chromax NF A14