C.Ainsy

point to which it stopped increasing which was 6 mins i have left it on for a hour before and the core difference is still the same

on stress test my core 1 is 51 and rest at 43 give or take 2 either way so core 1 is around 10 more but im not too fussed cheers

hello i have a i5 4690k @ 4.6ghz in a custom loop with my 2 480mm rads and a 240mm rad no gpu yet my idle temps on core 2,3,4 are 16-20c but core 1 is 27 to 30 roughly 10 more now i know my idle temps are good but would deliding the cpu and putting fresh thermal paste on and reliding it fix this or is it normal thanks

ye cheers mate i bought brand new flexi and didnt use it so i will ise that cheers

sorry wasnt clear i will be buying petg tubing and petg fittings 14/10 but for the flexi part at the bottom can i use my old fittings and spare tubing which are 19/13

hi i want to move from flexi tubing to hardline but i dont want my pumps and bottom res to be fixed as i may want to move it to see in (check for leaks) so could i use my plan to get 14/10 hard tubes and also then use my spare 19/13 flexi tubs and fittings for the bottom i understand i will be limited to 10mm flow but thats fine just didnt want to sped a extra on new fittings when i could possibly use old one thanks

im sure it is up to date but im going to put fresh update on hopefully that works

i have to put pc in sleep mode to prevent having to deal with this error its every time for me and driving me insane would a fresh bios from usb help ?

msi krait lga 1150

ive looked on the internet at the a2 boot error and it appears to be sata detection ive done some troubleshooting and temporarily fixed the issue so i can post when i reboot the system i have to disconnect my hdd boot off my ssd which has os on it and then turn pc off and plug hdd back in and then it boots but every time i shutdown pc or need to reboot i have to do this and its a pain all my hard drives work perfectly when booted but i cant seem to fix this error permanently ive also set boot priority but that doesn't work any help much appreciated

looks cool

I filled it up yesterday I'm using distilled water and a kill coil as you can see do I also need a biocide ?

Ok lol I realised when I took the picture will it be okay like that for a week or two until my gpu block arrives or do I need to drain it and change port

Could this be the reason I realised I've used a diffrent port this time the old port inuses had a tube thing going further into res ?

I use to have a 480mm rad on the top of my case with a Laing d5 and my res mounted onto it I recently added another 480mm rad to the bottom of my case so now I have 2 now I have to keep the g1/4" plug in the top of my res becuase when I turn off the pc my water rises out the res is this normal becuase I didn't have to put the plug in before I added another rad any help much appreciated thanks