evenst3ph3n

Do I clear cmos after each stick?

I have tried with one stick of ram and using on-board graphics the code is still 00 and still no power to the keyboard and mouse

There is no power coming to the wired keyboard or wired mouse from the motherboard I7 11700k Asus strix z590 e gaming mobo Asus tuf rx 6800xt gpu Corsair 750 hi psu All watercooled

I7 11700k Asus strix z590 e gaming mobo Asus tuf rx 6800xt gpu Corsair hx 750i psu All watercooled

3 days ago I upgrade my gpu from an nvidia to an amd without deleting the nvidia drivers. I also used some new custom cables(not) extensions with my psu. It all worked well for a few days when I ran the rog cpuz software and it said it need a update. I clicked OK and the whole machine froze. Since then I keep getting the 00 debug code and cannot post. I have tried pressing the clear cmos and I took out the battery. I have replaced the custom cables with the original cables and am still getting the same code and no post any suggestions please?

Thought so Bugger Probably not LOL Thank you

I have an i7 7700k and a Galax “Hall of Fame” GTX 1080 GPU. My current monitor is an ASUS 27” 1080p 144Hz. I play games such as Elder Scrolls, Assassins Creed and Witcher etc. All the research suggests that 1440p is the way to go, 144Hz, 27”, (I live in a 1 bedroom apartment so my PC desk is tiny so depth wise of the monitor stand has to be considered), G Sync and I would like it to be curved. All monitors I have seen have at least one element missing either no G Sync or they are not IPS or they are not 1440p or they are a flat screen. I really like the look of Asus’ https://www.asus.com/au/Monitors/ROG-SWIFT-PG27VQ/ but it’s a TN panel. Am I being too picky, as I sit right in front of the monitor? Is what I am looking for not available? Should I look at 4K? Is going from 144 FPS on a 1080p to 60 FPS on a 4k going to be an improvement or not? Is there still issues with Windows scaling with a 4K monitor? Any suggestions please.

Just as I thought thank you for that info.

Hi just complered my first waterbuild on a Auros Z270X Gaming 9 Mobo. I have an EK 140 res pump combo. It is a 4 pin PWM and powered by molex. I have connected it to the 4 pin header for a system fan/pump. In the bios for this header (6) I have a choice to set PWM or voltage I watched a youtube vid. and they suggested voltage but shouldnt I put the setting to PWM.

Why would I do that when I have a copy. Do you think there might be something wrong with my retail version?

Its a retail version I purchased and didn't have to do anything in January to make it bootable.

Hi I am trying to reinstall windows 10 from my retail USB. I have disconnected the ssd's and the hdd from the motherboard by taking the SATA cables out of the drives themselves and keeping the cables connected to the motherboard. I am trying to reinstall to my M.2 drive which I did in January with no problems at all. I have recently had a problem with command prompt popping up and kicking me out of my games so I decided to do a reinstall. I pressed f12, and in the boot menu chose the USB with Windows 10 to boot from. Unfortunately it just goes through to my normal desktop and doesn't give me an option to reinstall. I am using a Z170 motherboard and fast boot is disabled. What am I doing wrong.

Hi there do you have any links on how to sleeve the pipes? Yes I am a novice at this...

Think I will just wait for a while and see if anything new comes out later in the year. But thanks.

I have watched a few videos on plasti-dip coolers and the rubber pipes don't seem to be to successful as it peels off. What type of other spray paint would you suggest?