TheEpicDuck

The used market in Holland is horrible tbh. I do see some 980ti's for 125 Euro on marktplaas.nl I'd buy that over the 1070 ti for 150.

I got a kit from phanteks. They're a bit stiff but once you get them installed it's not an issue

I had the o11 Mini as well. I went with a cheap psu extension kit to make it look better at the time.

What case are you using? I would move the main GPU Into the top slot as well.

Works fine for me as well. Might be an issue on your end? Could be a geografical one.

I had an issue on my Asrock B550 Taichi where the Ethernet was very unstable. They did replace it with a newer one without the issue but I'm going to stay away from Intel NICs on my own desktop in the future. https://www.intel.com/content/www/us/en/support/articles/000057261/ethernet-products/gigabit-ethernet-controllers-up-to-2-5gbe.htm

Are you converting to Dual link DVI? Most adapters are single link.

Could be a short somewhere in your system. Only way to know for sure is to test with a known good psu

There are GTX cards as far back as 2006 and as recent as 2019. So yes and no

I'd choose the pixel personally. My OnePlus 7 Pro seems to be forgotten by them by now and the last software updates i got for were unstable.

There is an option in windows to uninstall the newest updates that can help. Here's a link for a guide: https://pureinfotech.com/uninstall-windows-11-22h2/

I had the O11 mini and a Suprim x 3070 Ti. Not too impressed with the cooling tbh.

Thanks. Now I have something to do next weekend

DRAM COMPONENTS ------------------------------------------------------------- Manufacturer : Hynix Part Number : H5AN8G8N[C/D]JR-TFC Package : Standard Monolithic 78-ball FBGA Die Density / Count : 8 Gb / 1 die Composition : 1024Mb x8 (64Mb x8 x 16 banks) Input Clock Frequency : 1067 MHz (0,938 ns) Minimum Timing Delays : 15-15-15-36-50 Read Latencies Supported : 16T, 15T, 14T, 13T, 12T, 11T, 10T Supply Voltage : 1,20 V XMP Certified : 1802 MHz / 16-19-19-39-58 / 1,35 V XMP Extreme : Not programmed SPD Revision : 1.0 / January 2014 XMP Revision : 2.0 / December 2013 ------------------------------------------------------------- Yup definitely Hynix. Am just out of luck over 3200Mhz then?

Looks like it's a Hynix kit. For now @ShrimpBrime Suggestion on manually setting 3200Mhz has worked.

Thanks. i'll try that

Hey guys, Over the past months or so I've had some real issues running my ram at 3600Mhz on my motherboard. It won't even boot when I apply the xmp profile. Does anyone have some experience with this? Specs. AMD Ryzen 5800x Asrock B550 Taichi G.Skill Trident Z neo 3600Mhz Thanks in advance for any suggestions.

https://download.lenovo.com/pccbbs/mobiles_pdf/0b48474.pdf Page 96

I'd remove everything and start over tbh. Make sure no cables are overlapping as much as possible.

I used to do VR with my 980 Ti. So it should be very well suited for it.

Did you make it work? Theres a dbug led on the top left which should light up during boot. you should check what code it stops at

Some clicking from the relays is normal. Does your motherboard have a dbug display or leds?

Vsync?

The Bluetooth headset I use has 2 devices built in and when I'm in a call it's locked to a hands free mode which has way worse quality. Not sure how to fix it on mobile I'm afraid