Jump to content

Xiauj

Member
  • Posts

    1,032
  • Joined

  • Last visited

Everything posted by Xiauj

  1. My afternoon just went from bad to worse, like, I don't even know where to begin..

    tenor.gif

     

    I think I might call it a night and restart life_exe tomorrow xD 

    /s

  2. Xiauj

    I swear to God...., if I see one more freaking…

    Ok, forget the above comment about the work-around/fix. I've just had the worst moment (or I guess day/afternoon) happen to Me..... I don't even know where to start, lmao.
  3. Xiauj

    I swear to God...., if I see one more freaking…

    Nvm. I think I might have found a work-around / fix for this situation.
  4. Xiauj

    I swear to God...., if I see one more freaking…

    Well... @Cyberspirit, the TLDR of it so far is that, I'm trying to get the plate and PCB to sit in the case but the plate isn't sitting flush on the right side probably because of the new Hotswap-Module-Cable (The one that arrived today). And also, the screws that were supplied go into the holes fine but they just wobble around so I dunno what to do atm. I'm a bit frustrated and kinda need some help lol.
  5. Xiauj

    I swear to God...., if I see one more freaking…

    @Cyberspirit Weeeeell......., there's 3 potential reasons. A) I'm just being incredibly dumb and/or missing something that is obvious. B) The parts just don't like Me (Not to mention the fact that My fingers are in agony from taking the switches out because My switch-pullers are useless). C) The new cable that arrived earlier today could be the cause (Which I very highly doubt).
  6. I swear to God...., if I see one more freaking Squarespace advert... after god knows how many this week thus far, I'm going to bed for the night lmao

    LateDeepEasternglasslizard-size_restrict

     

     

     

     

    In other news.... I'm currently building My new keyboard and bad things are happening which doesn't help! ?

    1.   Show previous replies  8 more
    2. Xiauj

      Xiauj

      @Cyberspirit Nah, something new. Having issues with the PCB.

    3. Cyberspirit

      Cyberspirit

      @Xiauj This new keyboard really doesn't want to be built, huh? What parts did you get, btw? Now I'm super curious.

    4. Xiauj

      Xiauj

      @Cyberspirit It's gonna be a TKL Keyboard with Turquoise-Tealios switches, steel plate, lubed stabs (And no they are NOT, I repeat, they are NOT Cherry/GMK, thank GOD xD) sealed within a plastic case although I'm gonna be changing that, hopefully.

       

      I have yet to order the keycaps as well, should be getting a GMK Set soon!

  7. Xiauj

    Lmao Don't worry guys! Reddit has saved us! /s

    @pierom_qwerty In before Rockstar asks Corona (Company) for their permission to add their own version of the Corona Beer into GTA-Online
  8. Lmao xD Don't worry guys! Reddit has saved us! /s

    1. piemadd

      piemadd

      But what if I drink a corona beer? Then ill get sick! /s

    2. Xiauj

      Xiauj

      @pierom_qwerty In before Rockstar asks Corona (Company) for their permission to add their own version of the Corona Beer into GTA-Online xD

  9. Xiauj

    Goodbye European-Union/Europe o/ Just been watc…

    @Java Lol ikr @TopHatProductions115 Uhhh... no offence, but, I already have been researching as I go along in everyday life... For the past year or two.. You might wanna read the original text again: I have a somewhat good idea of how Brexit is going but like I said, not as much as say... the USA's Politics system which IMHO is completely different compared to ours; everything going on with Trump, etc..
  10. Goodbye European-Union/Europe o/ xD

    Just been watching some live footage of the countdown and to be fully honest, I don't really know if the United Kingdom leaving the EU was a good or bad decision because, despite the fact I live in the UK (Duh.......... >_>), I don't follow UK Politics as much. As of recently, I've been watching the Trump Impeachment proceedings over at the Senate and all that stuff.

     

    Spoiler

    But still, is it weird that I don't follow My own country's politics as much compared to America's current state of politics? ?

    221-2218587_post-feelsweirdman-png-clipa

     

    1.   Show previous replies  3 more
    2. Xiauj

      Xiauj

      @Java Lol ikr xD

       

      @TopHatProductions115 Uhhh... no offence, but, I already have been researching as I go along in everyday life... ;) For the past year or two.. You might wanna read the original text again:

      Quote

      I don't follow UK Politics as much.

      I have a somewhat good idea of how Brexit is going but like I said, not as much as say... the USA's Politics system which IMHO is completely different compared to ours; everything going on with Trump, etc..

    3. TopHatProductions115

      TopHatProductions115

      I'm sorry for assuming, @Xiauj. I misread that part. 

    4. Xiauj
  11. As if My day couldn't get any worse.... :c Just been diagnosed with a skin condition :|. Luckily, it's only temporary, not permanent. Gotta keep an eye on it.

    1. soldier_ph

      soldier_ph

      Take your medication and get well soon !

    2. morra

      morra

      I heard African Black Soap really helps with skin issues. My friend has got acne and she's completely in love with this stuff.

  12. RIP Kobe Bryant :( I thought the the media were joking at first but I think it's actually true/fully confirmed. Cause of death seems to be a helicopter crash in Los Angeles, California. Aged 41. Some are saying His daughter was also killed :|

  13. Hey everyone, I recently (re)installed Windows 10 on a new ADATA SSD in place of My HDD and whilst I was on My PS4 earlier today, I kept noticing 1-2-3 second long screen flickers at the top part of My second-monitor. (FYI: The monitor I have PS4 on and My second monitor are sat right next to each other). It's still happening right now btw whilst using My PC and writing this forum-post, pretty much whenever the PC is being used / is turned on currently. I keep seeing it happen at least 2-4 times per minute every 5-10-15 minutes at random times. I just downloaded OBS to see if I could try and visually demonstrate it by recording it a video then replaying it on My main monitor where it's not happening but I can't seem to capture it on the video. In saying that though, one thing I did notice when adding a Display Capture then selecting My second-monitor in OBS before I was about to record a video was that, it took about 5 seconds for it to be recognized. It shows up as grey then it shows display about 5 seconds after, as mentioned. Here's where the confusing part comes into play: This has started happening today since I installed the ADATA SSD on Friday 17th January, 2020 and I don't know why! There's no broken pixels and/or bezel damage on the actual monitor from what I can tell. I've had it for ages but there's no physical damage to the panel. I just don't know why it's started happening since I replaced the HDD with the SSD. Does anyone know what could be the issue and how to fix it, if possible? I'm a little bit concerned/confused as You can probably tell. Thanks -Xiauj
  14. Xiauj

    Hello LTT-Forums once again Currently livin' th…

    Lol ikr, loving the new SSD so far
  15. Hello LTT-Forums once again :D Currently livin' the SSD-Life from here on! (I've never had an SSD before, sorry! I feel ashamed in Myself for saying that) **** using hard-drives ever again xD Unless it's for a crappy low-budget build, but still, You get what I mean.

     

    Had to do a fresh install of Windows 10 in the end. Noticing a couple of issues since I installed it last night but for the most part, it's doing well so far.

    1.   Show previous replies  2 more
    2. Xiauj

      Xiauj

      Lol ikr, loving the new SSD so far

    3. Tristerin

      Tristerin

      Once you go SSD, you cant go back.

    4. Tristerin

      Tristerin

      I rarely use my NUC so I swapped in a 500gb 7mm HDD drive to steal its SSD for another rig...I don't even like turning it on now.

  16. Hey everyone ( @Mira Yurizaki , @Kilrah , @Vishera & @Lady Fitzgerald ), Just thought I'd give an update I decided to go with a fresh install of Windows after all. Had no luck try to find another piece of software that is capable of transferring the OS (Windows 10), OS-Files and Personal Files to the NVMe-SSD. Bit of a shame that I've gotta reinstall some programs buuuuuuuut..... meh, whatever . Have noticed a couple of odd things since last night so I gotta contact MS about that. Or ask here, but yeah, just thought I'd give an update as mentioned.
  17. Hmm, interesting So do You think it is possible, but only if I change the ADATA M.2 Drive's settings to make it so that it's set to GPT and not MBR? Btw...
  18. Am I actually able to transfer from SATA to NVMe, Yes or No? ? Because I'm really confused right now and both of You are 50/50+saying Yes AND No, lol. And btw @Kilrah that option highlighted in Red in the image in the above comment, I did select that exact option, dragged everything over and let it start the cloning process.
  19. It's a ADATA SX8200 Pro 2TB M.2 SSD (https://uk.pcpartpicker.com/product/kQZzK8/adata-xpg-sx8200-pro-2-tb-m2-2280-nvme-solid-state-drive-asx8200pnp-2tt-c)
  20. Really? Hmm.. interesting. Soo what would You recommend that I do next / can use to clone absolutely everything, the OS, OS-Files, personal files etc..with no issues?
  21. @Mira Yurizaki Soo, does this mean Macrium Reflect is not able to transfer the OS, all system-files and everything else? Because of this "hidden partition that the computer uses to actually boot into Windows." ...? If not, any other suggestions on what to do next?
  22. I've never heard of that o.o So, is Macrium Reflect not able to transfer the OS, all system-files and everything else?
  23. After installing the M.2 SSD on the motherboard near My GPU, I dragged everything over that was in the HDD (..in the Macrium Reflect interface) to the M.2 SSD then it took about 50-60 mins to finish cloning, so I would have assumed it copied everything. What did I was this: I went into the BIOS after the cloning via Macrium Reflect was finished, restarted the PC, went into the BIOS, tried setting boot-option-1 to the M.2 SSD, saved and exited and it told Me to "reboot / select proper boot device / insert boot media" and so, I went back into the BIOS and set boot-option-1 back to the HDD so I could get back to the desktop. When I got to the desktop, I did notice that both drives were the same as shown below: Whilst writing/posting this comment, about 10 or so minutes ago, I have just restored device defaults on the M.2 SSD so it should be completely free/empty currently. My assumption is that it was a failed clone? I dunno what to do next D= any advice @Mira Yurizaki @Kilrah ?
  24. Hey everyone, In My current PC, I have My OS and EVERYTHING ELSE on a Seagate(?) Hard-Drive that I've had a while and as of recently, I decided to purchase a ADATA M.2 SSD for that little extra boost but there's a problem. I just tried Macrium Reflect to clone everything from the HDD to the M.2 SSD but that didn't work, I don't think so at least. So um........., does anybody know of a good reliable free software that can clone everything including the Operating-System files? ? I just want to clone absolutely everything, the OS and personal files etc.. onto the ADATA M.2 SSD, make that the boot-drive and reset the HDD to device defaults and remove it from the PC entirely. Please gimme some suggestions and thanks in advance! ? -Xiauj
×