-
Posts
131 -
Joined
-
Last visited
Reputation Activity
-
-
-
CyBaNeTiiKz got a reaction from FloGer in Linus' Law #347
#45 Like it if you like it, Dislike it of you dislike it!
-
CyBaNeTiiKz got a reaction from João Severino in Envy! With New Caselabs Mercury S8! Updated 13/09/2014!
Aww, no white LED's! White LED's would have been PERFECT in this build! All of the green would just burst with vibrance! I vote change them to white! Other than that gorgeous build
-
CyBaNeTiiKz got a reaction from MogIsWinning in Envy! With New Caselabs Mercury S8! Updated 13/09/2014!
Aww, no white LED's! White LED's would have been PERFECT in this build! All of the green would just burst with vibrance! I vote change them to white! Other than that gorgeous build
-
CyBaNeTiiKz got a reaction from Kick in Project Medusa [complete]
Shortest GPU cables I have ever seen haha! Nice Compact Build!! Love it!!
-
CyBaNeTiiKz got a reaction from Crimson_Touch in Envy! With New Caselabs Mercury S8! Updated 13/09/2014!
Aww, no white LED's! White LED's would have been PERFECT in this build! All of the green would just burst with vibrance! I vote change them to white! Other than that gorgeous build
-
CyBaNeTiiKz got a reaction from Mawcat in Envy! With New Caselabs Mercury S8! Updated 13/09/2014!
Aww, no white LED's! White LED's would have been PERFECT in this build! All of the green would just burst with vibrance! I vote change them to white! Other than that gorgeous build
-
CyBaNeTiiKz got a reaction from fuse in Envy! With New Caselabs Mercury S8! Updated 13/09/2014!
Aww, no white LED's! White LED's would have been PERFECT in this build! All of the green would just burst with vibrance! I vote change them to white! Other than that gorgeous build
-
CyBaNeTiiKz got a reaction from FMA in Envy! With New Caselabs Mercury S8! Updated 13/09/2014!
Aww, no white LED's! White LED's would have been PERFECT in this build! All of the green would just burst with vibrance! I vote change them to white! Other than that gorgeous build
-
CyBaNeTiiKz got a reaction from Jimstah87 in Envy! With New Caselabs Mercury S8! Updated 13/09/2014!
Aww, no white LED's! White LED's would have been PERFECT in this build! All of the green would just burst with vibrance! I vote change them to white! Other than that gorgeous build
-
CyBaNeTiiKz got a reaction from Bramm17 in 'the Cube' (Cooler Master Haf XB)
Like the build, but over blue with the LED's but they don't seem that bright so its not to bad! Love the backplate on that Vapor X
I know exactly what you mean!
-
CyBaNeTiiKz got a reaction from flibberdipper in Project Mercury - Caselabs S3 | Watercooled | GTX Titan - Completed!
I really like what you have done with the waterblocks. I was never really a fan of the frosted top design on them, and They recently released a 'Clean' version without frosting, but they way you have polished them up like this just makes them looks sooooooo much better! Love it!
-
CyBaNeTiiKz reacted to MetallicAcid in MetallicAcid's TJ07 (working title)
Update
Hello there!
I am very happy to present to everybody, a design that I am finally happy with, but is still subject to change. There are still a few things which I plan to do, very special things, but I want to keep these ideas as a surprise I have composed 18 renders over the last few days for your viewing pleasure, so please enjoy. Please note that the colour scheme is not final, but I am liking the blue/white scheme, and a purple/white scheme the most right now.
Please feel free to give me constructive criticism on how you think the design flows, and what you think are good and bad ideas. I know that I cannot please everybody, but I am always open for suggestion Physical work is planned to begin in December or even beginning of January, so there is enough time for me to buy parts and materials for this build. I will be taking on more night shifts at work in the coming months, so this means that I will have more dead time to get some small custom panel work completed at the workshop at work. You can expect some small updates So, with all said, please sit back and enjoy the show!
Day time tour:
Night time tour:
With best regards,
MetallicAcid.
-
-
-
CyBaNeTiiKz reacted to quackmasta in Project: Ghostfire (finished)
I finished this build a few weeks ago and i decieded i would post a build log since i tooke tons of photos. well here you go. enjoy. /popcorn
Hardware:
Motherboard: Asus Maximus V formula
CPU: Intel 17-3770k (running at 4.4ghz)
Ram: corsair platinum 2x 8gb 1600mhz
GPU: 2x EVGA GTX 670 FTW 4gb
Sound Card: Sound Blaster Pci Recon
PSU: Seasonic 1000w Platinum
Case: Caselabs SM8 Merlin ( white )
SSD: samsung 840 250GB
Harddrive: 1TB WD black
WaterCoolingGear:
Rads: 2x alphacool nexxos UT60 360mm
Pump: Swiftech MCP655-PWM
CPU Block: Aquacomputer kryos
GPU Block: Aquacomputer Nickel 680
Fittings: Bitspower white barbs 3/8inch
Fans: Phobya Nano-G 12 PWM Silenct 1500RPM Red LED
Fancontroller: Bitspower Recon white
Coolant: XSPC Bloodred
Rez: Bitspower Crystal rez 150ml
PumpTop: Bits power high flow delrin top
Modkit: Bitspower red mod kit
Peripherals:
Monitors: 2x Samsung SyncMaster PX2370
1x Samsung SyncMaster P2350
Keyboard: Razor Blackwidow Ultimate
Mouse: Razor Naga Epic
Mousepad: teamliquid razor goloathus
OS: Windows 7pro
I beleive that is it for the spec list.
Time for the photos of the hardware.
Case
started putting the parts on the mother board tray for prefit
Start fitting thing in the case to get it working and useful before i bought the Water cooling stuff.
Now a look at what i am upgradeing from.
put a heatsink i had laying around on there instead of the stock to push the cpu a little.
before i learned how to use exposer on my camera
this was my original layout for my water system.
got some blocks in
put the pump together
had axidentally oreded the wrong size fitting and it would cost the same to pay to send back and replace as it would be to just buy a new set. so i have white fitting for future builds
while i was putting this together this is how my system was running for about two months. mind you litterally this is how it was running.
time to drill a fw holes to mount the rez and pump. right now i wish i would of changed the rez mounts to inside the round groments instead of the outside. but what can ya do.
above i was trying to decide my pump founting position
this was my original plans for the build with the top of the rez. but it had to chage latter on and you will see but i will resolve the prob i had latter on.
was my original idea of lighting. but i decided against it in the end. i like the current one i chose better.
now to mount the GPU blocks
The gtx 670 FTW 4GB PCB
above i was considering painting the sli bridge white to go with the fittings and the backplates of the gpus white but i decided against it.
now i started tubing the system. trying to make it look as clean as i can and now you see what i mean i wish i would of changed to mounting for the rez and i didnt want to run the inlet for the rez to the bottom of it cause i felt it wouldnt of looked as good. and would of made the runs look to long
i was so nerviouse of this. but i filled it and was leak testing over night with a external psu. let it run consistantly over night.
the next morning nothing no leaks and all was good.
this is how i linked my pump up to the rez and the front rad
final photos. until i get off my lazzy but and finish my wireing but atm i an content on where it is.
this is the wires i have worked on and have not finished.
and my setup pics
well i hope you enjoyed and this was my first build log. I had a great time working on it. And hopefully i will be able to make anouther soon.
-
CyBaNeTiiKz reacted to M00NIE in [upgrade log] MSI - 780lightning/Mpower, Corsair 750D
Edit: Finished album, some more pics that aren't in the thread: http://imgur.com/a/QDVfy
So this upgrade was triggered by problems i was having with my current graphic cards, after a lot of frustration with my 570 sli i wanted to buy a single high end card to last a while. After seeing the 900&350d I had always planned to buy the 750d even before knowing its name. So since i was already using a z77 mpower, planning to buy a 780, and have a 750d on the way i decided to throw a bit more time/money at it to make something that looked cool. It was my first time sleeving so i decided to take some short cuts and buy the black pre sleeved cables for my PSU, and attempt to replace some of the wires with yellow myself. Old hardware used -
I5 2500k
MSI Z77 Mpower
Corsair 1600mhz ram
Silverstone Strider plus
Creative Titanium HD
2TB WD Green
OCZ vertex 3 120GB
Purchased -
Corsair 750D
3x 140mm Bequite! Silent wings 2 pwm
NZXT Hue
Silverstone sleeved PSU cables
MDPC-X yellow/black sleeve
To buy -
MSI 780 lightning
Swiftech h320
3x Noctua Nf-f12
Old system:
750d front panel connectors sleeved (nothing i could do about the USB3 connector, would require going to lengths i was not prepared for.) NZXT HUE sleeved
New case fans -
Front panel connected:
progress so far:
Reverse mounted the NZXT hue. Plan to have a Swiftec H320 with 3x Nf-f12's at the top, fans hidden between the case and rad. Also case fans will be powered by some splitter thing so wont connect to the motherboard unlike in this pic. For now i have the system running with an old cooler and using 1 of my 570s till i get the rest of the parts.
-
CyBaNeTiiKz reacted to Analog in Analog's Project: Isi (ft. Corsair 350D and Asus MARS 760x2) FINISHED
My Corsair 350D arrived yesterday a couple of days earlier than it supposed to, nevertheless I'm very happy with it. Here is the build transfered to the new case. Hope you enjoy the pictures.
PS: H110 is pain in the ass to fit in this case especially when you have a LGA 2011 motherboard.
Testing the PC in order to see if everything works after the transfer of the main components
The build is now pretty much finished
Some final glamor shots of the rig
-
CyBaNeTiiKz reacted to J4M35 in Project [NoName], watercooled Mini-ITX build
me while scrolling threw this thread
subbed
-
CyBaNeTiiKz reacted to PBaines in Custom Water Cooled Desk - 56k warning. Lotsa Pictures! *Now with Table of Contents*
Still need to have a little fiddle to get the led's off of the monitor but yay BOTW next week me hopes
-
CyBaNeTiiKz got a reaction from rhoscrazy in [Finished] Project: Cobalt (Chromed Copper Piping, Laser Etching, Cable Sleeving and More)
Those curtains are definitely university halls! Lol. God, they're ugly!
-
CyBaNeTiiKz got a reaction from mmracho in More game give aways!
I got a couple for steam
Burnout Paradise: Ultimate Box : EJD8T-GG624-0HX6V
Mirrors Edge: DTGFT-TIE6Q-2BPH3
Enjoy :D
-
CyBaNeTiiKz reacted to LaMokona in Project Tomb Raider
Finished the build today. Thank you everyone for the comments and advice throughout the build. Won’t keep y’all waiting any longer :D
Yes, I used red and black rather than all black. Asked a few friends and majority vote went to red and black.
Thank you all again for following and commenting :D
I can bring more pics if wanted
-
CyBaNeTiiKz reacted to Shawy in G5ive
It's because both sides act as a mirror, but at different times. When the lights are off inside the case, the outside acts as a mirror but you can see through it from the inside - where as when the lights are on, the inside acts as a mirror but you can see through it from the outside.
I took a couple more photos of the case in total darkness which gives a better representation of how it looks to the eye.