Jump to content

Velinzor

Member
 View Profile  See their activity

  • Posts

    251

  • Joined

  • Last visited

 Content Type 

Everything posted by Velinzor

  1. Velinzor
    AMD, the 2600 around 4.1Ghz and up has really good single core performance tbh I would go with AMD
  2. Velinzor
    the refresh rate wouldn't change that's what the monitor is set as, so if you have a 144Hz pannel and your only getting 120fps you can see all the frames still, just untill you get to 144fps then the frames after that are well basically irrelevant. I play on a 60Hz pannel an when I get +100fps it helps with input lag
  3. Velinzor
    Velinzor

    Finally got my account back

  4. Velinzor
    Though so
  5. Velinzor
    By HWMonitor, CAM and AIDA64 my cpu temps are fine idk why my liquid says 100c though
  6. Velinzor
    The liquid in my Kraken x62 is saying it is at 100c not sure why, I've never looked at the liquid temps till now messing around with cam. My CPU idles at about 20c and never goes above 55 to 60c under load https://gyazo.com/4a19ed61aa8f1c87695de9d304459a84
  7. Velinzor
    They are Vesa compatible, I'm asking for stand Ideas for my desk to eliminate screen wobble
  8. Velinzor
    I have x3 Acer K222HQL monitor running a fairly very inexpensive 5760x1080 setup Athough I get alot of monitor wobble from these stands, I am looking into a triple monitor mount solutions that will stop my monitors from wobbling
  9. Velinzor
    Couldn't
  10. Velinzor
    Thats old, I got 1370
  11. Velinzor
    My ram is at 2133 at 4.1GHz I got 1328 max
  12. Velinzor
    I ran it at 4.1 got 1320
  13. Velinzor
    I'm at 4GHz right now, I put it down 100Mhz to see what I would get. I got 1301 CB. My cpu isn't under performing, I was asking around They said I was lucky I changed my voltage when I did
  14. Velinzor
    Alright, So I figured out how to use the offset properly. I'm running at 4.1Ghz again with a voltage of 1.417
  15. Velinzor
    I had an offset of 0.02500
  16. Velinzor
    Okay so when I put it to 3.8Ghz. It goes to 1.395v I get 1138CB
  17. Velinzor
    I have no Idea how to use the offset tbh
  18. Velinzor
    Well It only shows an offset for me, This board is wank
  19. Velinzor
    Want to just have a call on Discord my head is spinning
  20. Velinzor
    I can't change my voltage in my Bios
  21. Velinzor
    Okay I'll set it to 3.8 with that vcore
  22. Velinzor
    at 4Ghz I got 1305
  23. Velinzor
    I have not set the core voltage to 1.45 in the bios I have to with AMD Master. The Bios on the Asus b350 Strix gaming f board won't let me change the Voltage. Every time I boot I have to put it down. I just underclocked it to 1.428v on 4Ghz
  24. Velinzor
    I disabled CPB and it did nothing to my voltage
  25. Velinzor
    Naw its good, I have it set at 1.45 It Autos to 1.5... I have to change it every time I boot into my computer through AMD Master
×