Velinzor

AMD, the 2600 around 4.1Ghz and up has really good single core performance tbh I would go with AMD

the refresh rate wouldn't change that's what the monitor is set as, so if you have a 144Hz pannel and your only getting 120fps you can see all the frames still, just untill you get to 144fps then the frames after that are well basically irrelevant. I play on a 60Hz pannel an when I get +100fps it helps with input lag

Though so

By HWMonitor, CAM and AIDA64 my cpu temps are fine idk why my liquid says 100c though

The liquid in my Kraken x62 is saying it is at 100c not sure why, I've never looked at the liquid temps till now messing around with cam. My CPU idles at about 20c and never goes above 55 to 60c under load https://gyazo.com/4a19ed61aa8f1c87695de9d304459a84

They are Vesa compatible, I'm asking for stand Ideas for my desk to eliminate screen wobble

I have x3 Acer K222HQL monitor running a fairly very inexpensive 5760x1080 setup Athough I get alot of monitor wobble from these stands, I am looking into a triple monitor mount solutions that will stop my monitors from wobbling

Couldn't

Thats old, I got 1370

My ram is at 2133 at 4.1GHz I got 1328 max

I ran it at 4.1 got 1320

I'm at 4GHz right now, I put it down 100Mhz to see what I would get. I got 1301 CB. My cpu isn't under performing, I was asking around They said I was lucky I changed my voltage when I did

Alright, So I figured out how to use the offset properly. I'm running at 4.1Ghz again with a voltage of 1.417

I had an offset of 0.02500