Ofir aviel

This is the map of my network. (I'm sorry for my drawing skills, they are bad...) Using my pixel 6 Pro I can access the 192.168.1.0/24 network and the 10.227.186.0/24 but I cannot access the 192.168.10.0/24 network. My end goal is to get access to the 192.168.10.0/24 network from my Pixel 6 Pro.

, I have a PiVpn WireGuard server running at my dad's house where the local network's subnet is 192.168.1.0/24, and I have a pfsense PC connected to a CGNAT Wan at my house as a client with the lan subnet of 192.168.10.0/24 to the WireGuard server. the WireGuard's subnet is 10.227.186.0/24 I want to access my 192.168.10.0/24 network when I am connected to the WireGuard server as a client. how can I achieve such a thing?

Hi, I have successfully installed FreeACS on a ubuntu server 18.04. I have a Technicolor TG789vac v2 that I have hacked and I now have access to the CWMP Settings (tr069) I did manage to get it (i think) to talk with the FreeACS server: but I can't figure out what username and password should i put in the settings in my router to get it to authenticate I would really appreciate any assistance or advice that anyone can provide. thank you all in advance!

Hi, I know it has been a few years since I started this thread. It's now 2023 and (somehow) the rubber replacement pack I ordered finally arrived today. I replaced the belt and it played find for an hour or so, and now it's back to how it was when I first started this thread. Does anyone has any idea what to do?

Yes, i connected it to the same SATA port as the old ssd. the original ssd boots normally.

I didn't clone the disk while windows is booted I cloned it with a windows pe disk with acronics

Hi, I have a problem with windows. I had the SanDisk plus 240GB and I used acronis disk clone utility to clone it to a new Samsung 870 Evo. Now when windows starts to boot, the whole pc would shut down and then when I start it back up, it gets to the automatic repair. When it is in the automatic repair screen, the pc stays on, but if I try to boot it normally again, or in any of the other modes(like safe mode) in startup settings it start to boot and then shuts down again

i know it has been a long time, i have successfully installed EIDAuthenticate on my pc and on my active directory server and i was ablle to enroll a test user to a "fake" smart card (i used a USB drive as a "smart card"), but when i try to use my cards with my smart card reader, i get this: anyone has a solution for me?

And the plane he took was near my house

But does It work if the drive is not detected in the bios?

i think its spining. i am running ubuntu from a usb drive but in the disks program i cant seem to find the drive

Hi, I have a wd my cloud home 8TB that does not boot anymore for some reason. I have taken it apart and took the drive out, and connected it to my pc, and the bios did not recognize it, so i looked it up on google and i found the thing about the 3.3V pin, but unfortunately, that did not work. does anyone have any other suggestions for how i can make the bios recognize the drive? the drive looks like this drive: (i did not take this picture, its one i found on google)

it worked! i am not getting this error anymore

It's running now, and I am waiting for it to finish

i ran it, and it showed this: but it still shows the error