Tyrosen

I've read all the posts already, but I still don't understand. Just built a rig, and the white debug light is on. It doesnt flash, nor does it turn off. Its on the whole time, and my PC won't boot. I consulted the manual, and its very hard to understand. It says, based on a color code, which part is keeping me from booting, but the color codes are all white, and I dont understand whats the problem. Could someone please give me any advice on how to fix? desperate as this PC ate up my wallet

Aw I don't

I was hoping for troubleshooting steps to see if its not actually dead before I RMA it

EVGA Bronze 500W, PCP says that the max wattage is lower than 300W

Just built a new PC, everything works fine except the graphics card. When the graphics card, a GTX 1070, is installed, the PC doesnt post, even though the lights and fans turn on. I am using the GPU's HDMI port, not the mobo, so thats not the problem. Don't have any other gpu to test with. only 1 PCIe slot. How would you go about solving this? The PC does work without graphics card, my i5 has onboard graphics

Headphones are 1/4 aux cable, Microphone is usb. The monitor doesnt have any sound output

I want to use the same headset and microphone for my PS4 and PC, but I don't want to unplug the wires every time I want to switch systems. Is there a hub to switch the connection with a press of a button?

Just finished, works like a charm now! but the problem is, I think dskchk deleted many files from my PC, but its fine, im happy my PC is all set

I'll try that. I don't know what happened to the USB boot drive, the file in there was corrupted also, same error and everything

I just set the boot priority first for the USB, but it still shows up the error, can't even get into the USB

Disk is healthy, but now its giving me "your PC needs to be repaired. The boot configuration data for your PC is missing or contains errors. File:\EFI\Microsoft\Boot\BCD Error code: 0xc000000f ". I don't know what to do now...

Just check everything. I'm 100% sure its the SSD now, which is an Intel 750.

And by then, the debug LED for the mobo would have told me if there was any hardware issues

MSI Godlike Gaming Carbon GTX 1080 Intel 750 PCIe SSD 2 WD BLACK That shouldnt equal 1000W

Just built this new computer, it works and all but every once in a while after booting on it will BSOD with a "MACHINE CHECK EXCEPTION" code. How do I fix this? I've looked online, and it says its most likely PSU, but my PSU is a Corsair 1000W, which would never undervoltage. Any ideas? Thank you