Sazexa

Not quite finished, but running.

I like that green and purple build.
 
Finally got my panels in. Last teaser picture, I'll take more once it's finished.

Here's some various pictures of my build! Debating between a few cases. It was originally in a Phanteks Evolv ATX TG, but, I never completely finished it in that case. (Hence SLI bridge/bad wire management.) The case was too small for my needs. I'm currently debating between a few cases. I'm also curious; how much of a difference do you guys think fans will make when I'm using three radiators? A 480 x 60, a 240 x 60, and a 360 x 40. I'm guessing with that much radiator surface area, fans won't make any more than a couple degrees difference.

Here's some pictures of the build progress. I'm debating on where I want to mount the reservoir and pump. I'm thinking in the secondary chamber on the case, for noise isolation and keeping the main chamber from looking cluttered.



Ordered some more cable combs for the two on the GPU. Though I might sell the 1080's and upgrade to 1080 Ti's, though that's not 100% yet. Already sinking enough money into this build, don't need to put in more really

I've started messing with the glass tubing, including bending and frosting it for the light dispersion when the build lights are on. The glass panels should be done in a week or two, and I'm going to have my two radiators, some case panels, and some internal parts, all cerakoted in a few days so that they match the silver finish of the RAM, monoblock, cable-clips, and SLI bridge.

So my glass panels for the case came in. Here's some more pre-finished shots. All my parts should be coming soon that were getting cerakoted. And I'll be pre-building the loop using PETG, mailing it out to Mayhem's, and they'll make glass tubes to mail to me pre-shaped.

Here's some pictures of the build progress. I'm debating on where I want to mount the reservoir and pump. I'm thinking in the secondary chamber on the case, for noise isolation and keeping the main chamber from looking cluttered.



Ordered some more cable combs for the two on the GPU. Though I might sell the 1080's and upgrade to 1080 Ti's, though that's not 100% yet. Already sinking enough money into this build, don't need to put in more really

I've started messing with the glass tubing, including bending and frosting it for the light dispersion when the build lights are on. The glass panels should be done in a week or two, and I'm going to have my two radiators, some case panels, and some internal parts, all cerakoted in a few days so that they match the silver finish of the RAM, monoblock, cable-clips, and SLI bridge.

Not quite finished, but running.

Here's some pictures of the build progress. I'm debating on where I want to mount the reservoir and pump. I'm thinking in the secondary chamber on the case, for noise isolation and keeping the main chamber from looking cluttered.



Ordered some more cable combs for the two on the GPU. Though I might sell the 1080's and upgrade to 1080 Ti's, though that's not 100% yet. Already sinking enough money into this build, don't need to put in more really

I've started messing with the glass tubing, including bending and frosting it for the light dispersion when the build lights are on. The glass panels should be done in a week or two, and I'm going to have my two radiators, some case panels, and some internal parts, all cerakoted in a few days so that they match the silver finish of the RAM, monoblock, cable-clips, and SLI bridge.

So my glass panels for the case came in. Here's some more pre-finished shots. All my parts should be coming soon that were getting cerakoted. And I'll be pre-building the loop using PETG, mailing it out to Mayhem's, and they'll make glass tubes to mail to me pre-shaped.

I like that green and purple build.
 
Finally got my panels in. Last teaser picture, I'll take more once it's finished.

Not quite finished, but running.

So my glass panels for the case came in. Here's some more pre-finished shots. All my parts should be coming soon that were getting cerakoted. And I'll be pre-building the loop using PETG, mailing it out to Mayhem's, and they'll make glass tubes to mail to me pre-shaped.

Not quite finished, but running.

Here's some pictures of the build progress. I'm debating on where I want to mount the reservoir and pump. I'm thinking in the secondary chamber on the case, for noise isolation and keeping the main chamber from looking cluttered.



Ordered some more cable combs for the two on the GPU. Though I might sell the 1080's and upgrade to 1080 Ti's, though that's not 100% yet. Already sinking enough money into this build, don't need to put in more really

I've started messing with the glass tubing, including bending and frosting it for the light dispersion when the build lights are on. The glass panels should be done in a week or two, and I'm going to have my two radiators, some case panels, and some internal parts, all cerakoted in a few days so that they match the silver finish of the RAM, monoblock, cable-clips, and SLI bridge.

So my glass panels for the case came in. Here's some more pre-finished shots. All my parts should be coming soon that were getting cerakoted. And I'll be pre-building the loop using PETG, mailing it out to Mayhem's, and they'll make glass tubes to mail to me pre-shaped.

Not quite finished, but running.

Here's some pictures of the build progress. I'm debating on where I want to mount the reservoir and pump. I'm thinking in the secondary chamber on the case, for noise isolation and keeping the main chamber from looking cluttered.



Ordered some more cable combs for the two on the GPU. Though I might sell the 1080's and upgrade to 1080 Ti's, though that's not 100% yet. Already sinking enough money into this build, don't need to put in more really

I've started messing with the glass tubing, including bending and frosting it for the light dispersion when the build lights are on. The glass panels should be done in a week or two, and I'm going to have my two radiators, some case panels, and some internal parts, all cerakoted in a few days so that they match the silver finish of the RAM, monoblock, cable-clips, and SLI bridge.

I like that green and purple build.
 
Finally got my panels in. Last teaser picture, I'll take more once it's finished.

Here's some pictures of the build progress. I'm debating on where I want to mount the reservoir and pump. I'm thinking in the secondary chamber on the case, for noise isolation and keeping the main chamber from looking cluttered.



Ordered some more cable combs for the two on the GPU. Though I might sell the 1080's and upgrade to 1080 Ti's, though that's not 100% yet. Already sinking enough money into this build, don't need to put in more really

I've started messing with the glass tubing, including bending and frosting it for the light dispersion when the build lights are on. The glass panels should be done in a week or two, and I'm going to have my two radiators, some case panels, and some internal parts, all cerakoted in a few days so that they match the silver finish of the RAM, monoblock, cable-clips, and SLI bridge.

So my glass panels for the case came in. Here's some more pre-finished shots. All my parts should be coming soon that were getting cerakoted. And I'll be pre-building the loop using PETG, mailing it out to Mayhem's, and they'll make glass tubes to mail to me pre-shaped.

034 motorsports has a great selection of audi parts, and if you're in the fremont-south bay area in california, you can even stop by their shop. but their website has a lot of things to get through until you get the car you want so i did it for you https://store.034motorsport.com/audi/s/s5/b8/4-2l-fsi.html

So I ended up buying the 2009 Audi S5. It has 88,000 miles. Car runs and drives excellently. It's likely got a small leak on the oil filter housing, so probably just an o-ring. And I don't remember the name of the part, but something towards the front wheels that help reduce road vibration needs to be replaced also on both tires. It's not dangerous though. The interior is very nice, though I'm scouring eBay for a replacement driver seat back, since the previous owner scuffed up one of the side bolsters on it pretty well. Myself and a couple friends worked on a muffler delete this weekend, and the 4.2L V8 engine just sounds soooooo good! We were thoroughly surprised. I'm not really tempted to do anything else to the exhaust, as it's plenty loud now. I'd like to do an intake, a really nice tune, some coil-overs and sway bars. And maybe in a few years once it's paid off a supercharger after building it up a bit. It needs some exterior touch up paint, but other than that, the car is in near flawless condition. Planning on getting the RS 5 honey-comb style grille and fog-light bezel, and, maybe some tires and wheels for the summer. Also once the brakes get more worn, some drilled and slotted rotors to top off the look.

Does anyone know of any good sites for aftermarket parts for the car? I know there isn't many as far as I've seen.

So I ended up buying the 2009 Audi S5. It has 88,000 miles. Car runs and drives excellently. It's likely got a small leak on the oil filter housing, so probably just an o-ring. And I don't remember the name of the part, but something towards the front wheels that help reduce road vibration needs to be replaced also on both tires. It's not dangerous though. The interior is very nice, though I'm scouring eBay for a replacement driver seat back, since the previous owner scuffed up one of the side bolsters on it pretty well. Myself and a couple friends worked on a muffler delete this weekend, and the 4.2L V8 engine just sounds soooooo good! We were thoroughly surprised. I'm not really tempted to do anything else to the exhaust, as it's plenty loud now. I'd like to do an intake, a really nice tune, some coil-overs and sway bars. And maybe in a few years once it's paid off a supercharger after building it up a bit. It needs some exterior touch up paint, but other than that, the car is in near flawless condition. Planning on getting the RS 5 honey-comb style grille and fog-light bezel, and, maybe some tires and wheels for the summer. Also once the brakes get more worn, some drilled and slotted rotors to top off the look.

Does anyone know of any good sites for aftermarket parts for the car? I know there isn't many as far as I've seen.

So I ended up buying the 2009 Audi S5. It has 88,000 miles. Car runs and drives excellently. It's likely got a small leak on the oil filter housing, so probably just an o-ring. And I don't remember the name of the part, but something towards the front wheels that help reduce road vibration needs to be replaced also on both tires. It's not dangerous though. The interior is very nice, though I'm scouring eBay for a replacement driver seat back, since the previous owner scuffed up one of the side bolsters on it pretty well. Myself and a couple friends worked on a muffler delete this weekend, and the 4.2L V8 engine just sounds soooooo good! We were thoroughly surprised. I'm not really tempted to do anything else to the exhaust, as it's plenty loud now. I'd like to do an intake, a really nice tune, some coil-overs and sway bars. And maybe in a few years once it's paid off a supercharger after building it up a bit. It needs some exterior touch up paint, but other than that, the car is in near flawless condition. Planning on getting the RS 5 honey-comb style grille and fog-light bezel, and, maybe some tires and wheels for the summer. Also once the brakes get more worn, some drilled and slotted rotors to top off the look.

Does anyone know of any good sites for aftermarket parts for the car? I know there isn't many as far as I've seen.

So I ended up buying the 2009 Audi S5. It has 88,000 miles. Car runs and drives excellently. It's likely got a small leak on the oil filter housing, so probably just an o-ring. And I don't remember the name of the part, but something towards the front wheels that help reduce road vibration needs to be replaced also on both tires. It's not dangerous though. The interior is very nice, though I'm scouring eBay for a replacement driver seat back, since the previous owner scuffed up one of the side bolsters on it pretty well. Myself and a couple friends worked on a muffler delete this weekend, and the 4.2L V8 engine just sounds soooooo good! We were thoroughly surprised. I'm not really tempted to do anything else to the exhaust, as it's plenty loud now. I'd like to do an intake, a really nice tune, some coil-overs and sway bars. And maybe in a few years once it's paid off a supercharger after building it up a bit. It needs some exterior touch up paint, but other than that, the car is in near flawless condition. Planning on getting the RS 5 honey-comb style grille and fog-light bezel, and, maybe some tires and wheels for the summer. Also once the brakes get more worn, some drilled and slotted rotors to top off the look.

Does anyone know of any good sites for aftermarket parts for the car? I know there isn't many as far as I've seen.