TechniKal

So we're opening our shops up (automotive) and I've been tasked with building the best security system for it that has good quality and is able to be viewed on the Roku and a Amazon fire stick. I'm looking where I can use a computer with a survalince distro running on it I'm not horrible worried about that but we need 14 to 16 cameras for under 2000 I found some amecrest 4k Poe and yes I want Poe a lot simpler to setup and use. Any ideas will be appreciated. I'm doing this by phone as I'm in a car but just message me with questions and I'll answer as fast as I can

Make sure you have the cou properly mounted with decent tightness just had this a few days ago

Thanks to anyone who will try to help. I'm not at the computer at the moment, but I have a large knowledge of the problems and the steps I have taken

Few months back one random morning I started having a problem my computer with only two of the three displays and usb were connecting and disconnecting. So i went through trying to find if anyone had the problems and couldnt find anything. So i went through some standart trouble shooting. Try to see if there was any new events that happened see if anything cause it to updating had this problem didn't see anything then I started going to the hardware side went barebones won't stick around 1 CPU the motherboard plugged it all in with only the display for working still did it went to one GPU still doing it nothing on hardware side effects it takes a few buddies see if they ever had a problem one of them said that they had something similar and it was a PSU I've had problems with this PSU manufacture before and I went to a buddy that had an old computer of mine got the PSU out of it took it home tried it out no work this is probably two months and by this point.so I diagnosed it that it's probably a motherboard issue seeming that is still doing it with almost no hardware into it. So contacted motherboard manufacturer they said shipping and we'll see what we can do but in a box and forgot about all the emails and it's been about 4 months now so buddy of mine that had my old computer brought this computer to me so I can use it hooked everything up all very old hardware 3 to 4 years old nothing that I've ever had a problem with always work whenever I needed it I hooked up my old drives to it so I had all my saves and turned it on still has a problem so I backed up all my files disconnected to my storage drives and then reset Windows on my SSD after I was done resetting it started working fully 500% like it's supposed to not a single problem all three displays showing up USBS are not having a freak out it was turning out to be great well three days later which was this morning I turn on my computer after installing graphics drivers and updating graphics drivers and I went to sleep while it was updating woke up went to the computer you play some YouTube and it started doing again only two of the displays were showing up out of the three if you look into display settings it would show that they'll be a third screen connected but it will sometimes disconnect and reconnect and I'll show unavailable. USBS are freaking out reconnecting disconnecting every 5 seconds and I have no idea what's causing this I tried deleting my graphics driver putting it back to the day before nothing has helped. Rig #1 Cpu 6700k Gpu 2 gtx960 Psu evga 1000 watt Ram 1 16gig stick of vengeance ddr4 1 year and a few months Rig #2 Cpu 3500k Gpu 1 gtx 670 Psu corsair 650 wattt Ram 2 sticks of 8 gig.vengeance ddr3 3-4 years old

For the most part all visual and audio interface or well anything isnt working or showing up. The buzzer on mb isnt working dont know if it is bios. Ive attempted reseting bios/cmos mutiple times but it dosnt seem to work. I might have fried the ram sticks. Also the dimm were all empty Thank you for trying to help me

After thinking about it I think I overclock my memory a little too high or too much power because I think that is the last thing I did before I restarted it and it would never come on again CMOS resetting CMOS doesn't work could this be Ram problem

So I gutted the whole computer I set it up without CPU just power and it brung up the qcode C I reinstall the CPU with a new thermal paste then I ran it with no Ram in it and it brought up these 3 codes I put a one stick of ram in it and it brought up the qcode 32 here is the link to the few qcode that were brought up

So the EVGA z170 x99 for the win motherboard with an Intel i7 6700 K 32 gigabytes of Corsair lpx memory two 960 EVGA FTW GPU after a little bit of overclocking I don't know what sparked it but my computer stopped working,when turning it turns on all the lights and it turns on all the fans, hard drives, gpus on but it does not show any post or show any signal. I've checked it with multiple monitors without gpu, with one GPU then I switched from and none of them work I have one stick of memory in it, CPU Cooler, cpu, and fans no other USB and it still does not work it brings up the postcode 32 which is from my knowledge of good postcode I am new to this and I do not know what's wrong The psu is a 650 watt rosewell 50+ platinum

Thank I'll have to check it out

Hello this is my first time building a computer for my cameras. I've have bought multiple dvr and all have cramped out from high demand of 24/7, and network streaming. I want the computer to be able to get all cameras, be able to view through my phone tablet other pc, and be able to run small servers. I can't really find a decent cctv pci card so I was hoping the community could help me out I need a 16ch card and that'd be awsome. Here is a link to the computer I put together http://pcpartpicker.com/list/PFzz7h Thank you

Gaming

I love buildingredients a new pc, but I don't know if the gourmet will work with everything else http://pcpartpicker.com/p/yptqxr