BeckModZ

Thank you very much for your kindness ! Different taste But thanks It's just a waterblock from EK Water Blocks, thats installed to the GPU .. Regarding the skews, im pretty sure it's just the angle the picture was taken. though the one from pump to tunnel had to be a bit skewed

Done Filling The Loop, Now Bleed Testing FINALLY it was time to fill the loop with the beautiful Mayhems Pastel Blue, and it looks amazing! Really spot on color match with the sky blue acrylic parts! Before i filled the loop, i obviously did a leak test and cleaning of the parts with distilled water, and found a few smaller leaks, that had to be fixed. But once that was taken care off, the mayhems blue filled up the loop and res block of the Blue Morpho, and result looks breathtaking! <3 So lean back, scroll through these images and enjoy! .. Final images will come very soon, just have to do some minor adjustments before it's ready. Need to figure out if i should bend some of the remaining white acrylic, and do some smexy cover for the I/O in the top, and also still need to get the white acrylic cover in the bottom finished, and glue the small butterflies in place, for a final touch.. Also last but not least, tighten those cables up again so please my OCD.. Enjoy!! Thanks so much for the support both from all you guys in the forum and my facebookpage "Beckmodz - liquid Designs" who has been following this project!<3

Thanks .. filled the loop 2 days ago and still doing bleed test update will follow soon. i used the lian-li pw-pci-e-1 gen 3 riser i think

Thank you very much yes took a crapload of time to get everything straight.. Was thinking of doing some white acrylic to cover the i/o bit, but havnt decided yet, just want to get this one done now, and get started on the s-frame project

Tubing Done! Ready to Fill the loop! SO after 14 days more of work offshore, and i am finally home again to work on this beauty!.. Just finished the Tubing, and am pretty happy about the result, or i WAS, untill i did the first leak test! one of the small 90 degree bends from tray tunnel to rad was leaking, so tried 6 new bends but just couldnt get it to work in that small space, so ended up using 2 x 45 adapter and a spacer instead. Also the top tube from cpu to reservoir was bleeding a little, so decided to make a new tube for that one as well.. And finally no leaks! But updates of that will follow soon! First off, here's a few images of the bends. I also took the time to get the 2 x 6pin sleeves inside and under the frame, instead of the horrible crap where i had them going out and over the frame! Was messing so bad with my OCD, so had to fix it, and finally im pleased! While posting this update, the blue morpho is doing a 24 hour bleed test! Updates and final images VERY soon !! <3 Hope you like it !! cant wait to show you the next update!

Thanks man ! .. Indeed, too many bends ! .. but going to look nice i think

Allmost Done Sleeving! Thank GOD, i am allmost done with all the sleeving.. The cable lacing took forever and was hard on my OCD haha. I still have to arrange them a little more neat and close together, and also sand the edges of the acrylic window that holds them in place. But leaving the cables alone for a while and have started doing all the tubing, Just to get my mind on something else than lacing! Anyways, here's a few photos of the sleeving result so far, hope you enjoy it, and i'm sure it will look very nice once it's all done. Majestic looking EK WATER BLOCKS below <3 Now to continue all the bends on the tubing. Needed a break! haha.

Sleeving and Installing Blocks So the past week i've been busy doing all the sleeving, and I'm still not done... I started with the cable lacing, (takes forever!), and i'm not sure i want to use the blue cotton thread because it looks fluffy. So probably going to get some waxed blue thread instead and redo it. Anyways i will attach a few images below so you can see what i mean. I also installed all the waterblocks and fittings today, and see if i can find the best looking way to do the tubing, this weekend. Another thing i have been doing is drilling 14 holes on the backside of the reservoir and tapped them, then mounted some standoffs that will keep the clear plexi plate in place, which is going to keep all the cables neatly in place.. At least thats the idea, dont know how it'g going to look yet. Almost forgot! Been trying a few options out for the placement of the powerbutton, and ended up bending some acrylic under the rad, and installed the button in that. Not done with it yet though!.. need some fine adjustments and maybe some blue vinyl.. Originally i was going to put an LCD temp in the acrylic piece also, but we'll see Stay tuned guys, soon more sleeving and also the tubing is getting done soon!

Need Help With 24Pin Sleeving Design?! Since the block is finally here, it is time to start the massive sleeving job!.. Today i started on the 24pin, and have some troubles choosing what layout to go with, so i took some photos and threw in some numbers on them, and hopefully you guys can help me pick the best design, before i go all crazy with all the damn double wires i have to make! Take your pick and let me know guys Also added a quick picture of my pinout for the 24pin.. massive! ..Always remember to write down the pinouts before you rip the old cable apart ! And will be using white connectors in the front, instead of black ones, so threw in a photo of the 4pin CPU cable going in through the block, to give you an idea. Also i decided that it will look too disturbing to the eyes if using cablecombs,when there's 44 cables in the back that has to be nicely tugged together.. So instead i will probably go Oldschool and do cable lacing on all 44 cables. Hopefully with a very neat looking end result. Please write what number you like the most, so i can get started with the 24pin.

Thanks very much guys !

FINALLY!! The Reservoir/Motherboard block has arrived! So after waiting way too long for this piece of art, Parvum finally finished the reservoir and motherboard block, and i have to say, once again they did an absolutely AMAZING job. The block looks so stunning. i unpacked it and instantly tried to see if i could mount it, unfortunally the mount holes was on the wrong side of the block, so i had to drill and tap new mounting holes, and also had to tap the rad holder mount. So guys, finally here's a small tease of the block and a quick mount of it! Really sorry about the white plastic pieces in the block, was lazy and didnt want to open up the block to get it out. (14 days of work and 200hours, im tired!) Hope you like it !! cant wait to show you the next updates

Installing the PSU while Awaiting Parvum So just a small update guys. The reservoir/motherboard block from Parvum, still isn't finished Really hope it gets done soon, as i hate to keep pushing the deadlines on this project, but i know it's a complicated piece of work and that it's better to have everything correct so we dont have to re-do it.. Also had to re-design the block after sending new meassures, but i think this will look much more sexy when done. Will put in a image of that too. So while waiting for the block, there's not really anything i can do, want to start sleeving but since the block isn't here, i have no idea about the lengths of the wires. So i installed the PSU instead and started thinking about just making the psu side of the cables, and then just cut them long enough that i can adjust the length once the block is here. Well, i have around 4-6cm of freeroom for all the double wires, and just noticed that the 24pin has 11 freakin double wires.. Amazing, so i guess the old soldering iron will come into play again. Just hope that i can make it neat and that there's enough space to fit all them cables Oh, wait, i also have the next project planned when i am done with this one An In Win S-Frame project called "Phoenix", with x99 soc Force from gigabyte, and alot of sexy custom waterblocks to be made for it..! So have a look out for that one when the blue morpho is finished Dropped in a few teaser images for that project. Now some teaser images for the next project.. Hope you like it !!

Final Renders of Res/Mobo Block Before Cut So the reservoir/motherboard tray is now in ready to get cut!. While I have 14 days of work ahead of me with 168 hours total, so will not have any time to build in that period. But when i get back from work in two weeks, the reservoir block should be arriving at my door. Here's some new 3D renders with the cable routing and ssd housing on the backside of the block. Really looking forward to getting this piece home and see how it all comes together! So be patient guys, updates will come again when i am home from work in two weeks, and when the reservoir is here. Hope you like it !!

Just Trying Some New Stuff So as i await the big piece of acrylic block from parvum, I recieved som goodies from both CaseKing and Coolerkit. I take photos of these later on, but first off i wanted to show some 90 degree angles adapters in acrylic that i recieved. I kinda like the looks of these, an actually think they would be a perfect match to the big acrylic reservoir/motherboard combo. But who knows, i might change it once the block is here and i have a better visual idea of it. For now though, i installed them to get a visual idea of the flow direction, and also the new flow meter arrived, which had a matching skye blue backplate that fits perfect to the rest of the acrylic custom parts! The fittings leading towards the back of the case, from gpu, from rad and from pump, are going into the tunnels in the reservoir block, and being guided to the next piece of hardware. Will be easier to see later folks, so stay tuned and let me know what you think of the angled adapters. Should they stay or should they go ? Stay Tuned Guys!!

Small Status Update Hey Guys, Just a small status update.. I am currently awaiting the Reservoir/motherboard block from Parvum, and really not much work i can do until it's here. Would love to do the sleeving, but don't really know the length of the cables until the block is here. Same goes with installing the parts or making some sexiness to the motherboard since the motherboard is at Parvum for measurement. So next photo update will be the reservoir block when it arrives, and it's going to be amazing!! Also got my new camera, a Canon EOS 70D and some macro lenses, so images are hopefully going to get even better now. If not then i will go back to my HTC ONE M9 that has delivered all the images up until now. So stay tuned guys, next update is going to be pure sexiness!!