Roshann

I know right? https://www.ebay.com/itm/AMD-Athlon-MP-2000-AMSN2000DUT3C-Socket-462-A-Processor-TQ174/113800750606?epid=74060782&hash=item1a7f0da60e:g:ZO0AAOSwba1dFlj8 68 and for me 28 shipping https://www.ebay.com/itm/AMD-Duron-600-D600AST1B-SOCKET-462-A/312337371452?hash=item48b8c2113c:g:TXwAAOSwE~Zb-vlm 39+25 shipping, I bought this for $7 Intel is probably even more https://www.ebay.com/itm/Gigabyte-6VXD7-Dual-Socket-370-Pentium3-MotherBoard-REV-2-0/122586381273?epid=1100403222&hash=item1c8ab7bbd9:g:TYUAAOSw-2hcF-8D I mean it’s pretty cool but $999

Yep some parts can be cheap if it’s local but eBay has more to offer but a price to pay (especially shipping + tax) For example, this msi board I saw is 28 including the cpu and ram but I saw the same board without the extras for $138 online (Overpriced ? )

I had the exact PLL chip matched etc I could slowly take a few mhz off but if it was sitting at 130mhz it would freeze after some time. I looked this msi board up and you can put some jumpers into the right position to use a 100mhz fsb setting and people said they got their Duron 650mhz working on their board like this.. which is what I want nForce would be amazing but it would be nearly impossible to get though.. or super expensive I don’t want to overclock, I want to underclock or use the default 600mhz speed And mATX.. I looked around quite a bit and haven’t been able to find one with nForce and this msi board is $28 with a cpu, ram and shield I appreciate the help though! The PC I am building isn’t going to be a gaming rig, mostly Pascal stuff or low demanding games etc which is why I wanted to use this Duron 600mhz as it uses less wattage then my Sempron 3000+.

I kinda bought it because I wanted it to be slow and low wattage etc since what I plan on using it for doesn’t need any power at all If I wanted speed, I could put my AMD Sempron 3000+ in.. it has PC3200 ram btw. Changing the FSB with setFSB (ICS950910AF Clock Generator / PLL) results in the PC freezing or getting a no ram beeping error. (Changing the 133mhz to 100mhz) Still don’t know if it is the reason why the sensor doesn’t work though. Maybe it is because of this “overclock” but I’m not sure. I have too many options rn either getting a different motherboard (I want microATX and firewire is nice too so I can charge an iPod if I want eh I don’t have a brick), buy different RAM (pc1600) or buy a new Duron CPU I will probably need to get a different motherboard from what I have learned thus far if I want to use that Duron 600mhz. Very hard to get though since the ones sold near me don’t support it I found a MSI KM3M-V near me which I will probably get if I can get a good price hehe

I’ve figured out that it’s running at 800mhz because the busspeed is at 266 mhz (133mhz x2) and its designed for 200mhz (100 x2) and it has a x6 multiply so 100 x 6 = 600. But it runs at 133 x 6 aka 800mhz. The chipset supports 200, the motherboard runs at 266. Could this be the reason why it doesn’t show any temps? https://uat.support.hp.com/za-en/document/c00069442 Motherboard link^ https://www.viatech.com/en/silicon/legacy/chipsets/km400a/ Chipset link^ GPU-Z just crashes at start up and older versions only show gpu info for my FX 5200. CPU-Z shows no temps but does show the bus speed etc

Yes I have all the right drivers and the right config for my motherboard for speedfan and in the bios it says 0c / 32f and I will try that next

BTW speedfan says -48c for the cpu.. I feel like the cpu is just damaged or the sensor is dead.

I also liked this pic but kinda off topic lmao

Hey, I bought a AMD Duron 600mhz yesterday and received it in the mail today. However, my bios sees it as a AMD Duron 800mhz and the temp shows up as 0c. Before this I had a AMD Sempron 3000+ (Obviously faster etc but I don't need the speed ) Because it shows up incorrectly and has a wrong Celsius value, the fans ramp up to 100% the whole time. Oddly enough, inside the BIOS the fans are at an OK speed (Still a bit fast but ok). After leaving the BIOS and even trying to boot to a floppy, the fans go to 100%. My other CPU, the sempron, works just fine with the correct temps etc and the fan is very quiet. Even when inside Windows.. My motherboard is a7v8x-la, it has the correct socket and this Duron CPU is older than the one I had in it before. It should work just fine and is supported. I already tried updating the bios to the latest version with nothing changing. (3.15) Do you have any idea or is this cpu just.. dead? It works fine but the fans are wayyyyyyyyy too loud.. Some information to sum it up: a7v8x-la Mobo AMD duron 600 CPU (yes 600 not 800 even though it says it’s 800, the numbers on the cpu say 600) I tried 2 psu, 135 watt and 400 watt BIOS version 3.15 The AMD sempron 3000+ works normal and shows 49c. If I use fanspeed to check the temps of the duron, it says 29c and -48c. Changing the fan speeds from there doesn’t work, they’ll go down as you change it but go back to 100% a second later. core temp shows 0c (It’s a single core cpu btw) I cleaned everything well and it’s not the first time I put a PC together. (I had to assemble PC’s many many times for my internships including servers etc haha and repair multiple pcs/laptops on the daily) So I have my doubts that I put something in wrongly hehe If you have any idea, let me know if not, I will contact the seller and hit him up. I bought it at some store What I have tried; Clearing cmos, default bios settings, Cleaning the CPU very well since you can overclock it with a pencil(So I have heard), Different psu, reseating it, updating the bios, reinstalling windows xp (I had to else I couldn’t install the bios since I was stuck in an activation loop and yes I tried to extend the 30day trial a few times but it stopped working) and lastly just cleaning it and other stuff some more so it’s dust free. (With care)

Cool thanks, I’ll take a look at both and think about it. Rn I have to fix an issue with my cpu first

I found this case; Chieftec CI-01B-OP Looks good, cube shaped which is nice but maybe a bit on the larger side I’ll continue looking around. It’s an almost perfect case though for a DOS pc. 5.25 inch and 3.5 inch extern slots.

Hey, I’m looking for the absolutely smallest Micro ATX case that can fit a normal atx power supply and has a 5.25 inch bay. No GPU, no pci etc just the motherboard. i’ve looked around quite a bit but they are all either quite large or cost more than this entire system that I plan on using.. It’s a dos pc with no hdd etc just floppy and I want a small case for it Does anyone know such a case or uses one? Let me know !

Just tried PrimeOS and it’s veryyyyyy good, best one I have tried. However, the one app that I need does not work. I think it’s because of x86 though. App name; Insta Ultra (sideloaded app, modded version of the normal instagram) or any other modded Instagram app isn’t working. When looking for an official Instagram apk online, I saw different versions including a x86 version. The modded app is probably just an ARM app so it doesn’t work. That’s my guess but yeah without an app like this, the system is very useless to me. I guess I’ll continue with my samsung dex system since it will just not work. Thanks anyways though, PrimeOS is very good, just a bummer that this app doesn’t work. I run a few pages and need this app to easily download items and using a desktop version like Dex was really a speedy improvement to me. But without this it’s kind of useless.

Hello! I’ve been playing around with Android on x86 in the last few days and.. my experience.. it’s terrible.. I’ve tried Bliss 11, 12, normal x86 and wanted to download some others tomorrow. Why was it so terrible imo? Very glitchy and crashes often and I just could not get any freeform windows to work. It did work on bliss 12 but it was very glitchy and had many graphical issues and was respringing? Often. Anyone have some more experience with it? I want to use Android on some oldish i5 PC for social media etc Instagram and a modded Instagram to download stuff with. But with the ones I’ve tried It would go in fullscreen mode or be glitchy or with the normal x86 android it would just not work at all (ethernet). I’ve looked around on google for aggeeesssssssss with no luck. Can’t find anything good. I want to try Prime OS tomorrow. Atm I use Samsung Dex for a desktop experience but I’d rather use an actual desktop PC for the task. Dex isn’t perfect as I can’t move Instagram around and my current dongle doesn’t have an extra usbc port for charging so I can use it for some time until it hits 36% and my usb3 ethernet adapter stops working . So if anyone have any idea or tips let me know ✌︎ Motherboard is from Dell, CPU i5-2400 and 4gb ram. Idk the full name out of my head but if you need it I can look it up. Windows is fine too or Linux just no bluestacks aha I was also thinking of ChromeOS as some have Android support, like FYDEOS

Omfg I LOST ALL MY COINS THAT I THOUGHT WERE ON MY OTHER DRIVE OMH