HeroXLazer

Locked.
 
This falls into malicious behavior/actions and it isn't allowed on the forum.

If you decide to use conduit, you should still use exterior cable. The conduit provides more physical protection, but condensation can form inside the conduit and inside the ethernet cable itself. Exterior cables should be gel filled to prevent the condensation from forming. 

No you can use that exterior cable without conduit if you like.
 
If you use conduit you can run regular CAT 6A cable, no need for exterior grade stuff as the conduit would be what protects the cable itself. Any home improvement or hardware store will have exterior PVC conduit. 

Ideally you should always run cable within conduit to protect it on the exterior but you can just use tough cable and anchor it to the structure with cable hold downs as is. 
 
Here are also some options if you want CAT 6A exterior grade cable. 
http://www.primuscable.com/cat6a-outdoor-cable.aspx

You can use regular CAT 6A cable inside of a conduit which is how it should be run on the exterior regardless. If you want exterior cable I would recommend ubiquit's tough cable, it is however CAT 5e unless you need 10 gigabit speed. 
https://www.ubnt.com/accessories/toughcable/

CPU: i7 - 8700K Motherboard: Asus ROG Maximus X Hero (WI-FI AC) Cooling: Custom Hardline loop cooling the Graphics Card and CPU | 2 360 Rads Thermal Paste: Thermal Grizzly Kryonaut RAM: G.Skill Trident Z RGB 32GB (4 x 8GB) DDR4 3600 MHz Graphics Card: EVGA 1080 Ti FTW3 SSD: Samsung 960 PRO 512GB M.2 HDD: Seagate BarraCuda Pro 7200RPM 4TB PSU: EVGA Supernova P2 1000W Case: Fractal Design Define R6 Blackout TG Fans: 5 Dual Pack Corsair SP120 PWM High Performance Edition Operating System: Windows 10 Pro Boot Drive (Key bought from Kinguin) Accesories: NZXT Puck NZXT GRID+ V3 Fan Controller NZXT Hue+ Peripherals: Mouse: Razer Deathadder Elite Keyboard: Razer Blackwidow X Chroma AMP: Sennheiser GSX 1000 Headphones: Hyper X Cloud Alpha Speakers: Bose Companion 2 Series III  

 
Wagner Furno 500 Heat Gun Barrow 10mm Silicone Insert Wera Kraftform Kompakt Ratcheting Screwdriver Needle Nose Pliers Zipties Ziptie Mounts ModRight Mainboard Anti-Static Mod-Mat 3 Piece Thermal Grizzly Spatula EKWB 1000mL Filling Bottle PETG Chamfering: 1,000 grit sandpaper 1,500 grit sandpaper Thin block of wood (sandpapering surface) 3 DeWALT Small Trigger Clamps (to clamp sandpaper)  

 
Like I mentioned before in the introduction, I had been planning the build since Summer and since then the list changed a lot and I went from wanting to do hardline to bouncing between using an AIO or using a kit like EKWB's MLC Phoenix and then back to hardline. I also made a drawing planning out the approximate shape of the loop and the exact order of the loop.

 

This looks pretty cool.

Why not use a cable modem and a Google WiFi kit?

Hello Everyone!
 
Just wanna share my cleanest NCASE M1 build since I got it.
 
Let me know what you think guys!  Specs below. Thanks! 
 
HARDWARE
Intel Core i7-7700K Processor 4.20GHz (Up to 4.50GHz)
Asus ROG STRIX Z270I Gaming mini-ITX Board
G.Skill Trident Z RGB 3200MHz (32GB)
nVIDIA GeForce GTX 1080Ti GDDR5X 11GB
Samsung 850 EVO (500GB) - Boot Drive
Seagate FireCuda SSHD (2TB) - Mass Storage
Silverstone SFX 600W
NCASE M1 Case
 
WATERCOOLING
Alphacool Eisbaer Solo
Barrow Fittings - 14mm
Barrow PETG Tube - 14mm
Hardware Labs Black Ice Nemesis M92 GTX 92mm Radiator
Noctua NF-A9x14 - Radiator Fan
Mayhems XT-1 Nuke UV Green Coolant
 

 
Few photos can be found here, https://imgur.com/a/p1atk
 
My YouTube video below.
 
 
 
 
 
 
 
 
 

What's the model number of the modem/router that ATT gave you. Also, check if there are any firmware updates. Finally, LUCKY. I'm not saying I have slow internet, but I have 200MBPS on Xfinity. It's the Xfinity part that I don't like... Also, where do you live, I've heard about ATT Gigapower, but I'm not sure where they have it now.

http://speedtest.att.com/speedtest/

Oh, hi, I saw you on SFFF, and I saw this project on there also. I'm the guy with the custom PCB keyboard design I posted yesterday.

Semi active on r/globaloffensive and on r/guildwars2, was also at one point top  active contributor on survivetheark.com (ark forums) but lets say I became... disenfranchised, by WC's antics, and the month wait to even reply to my ticket that literally broke my game (unlaunchable.)
 
Currently this is my main forum though, eith ocasional reddit browses. Part of the reason I prefer this forum over reddit is because the community is small enough to make friends. And enemies. Ive made too many of those.

Only about three.  This one on occasion, TechPowerUp on a few occasions, and the home forum being Overclock, though I stay over in the folding and boinc subforums there most of the time.

I know, but it matches my theme, and I can't find a gold one.

I think you need to combine this with another Tower 900. It's wayyyyy too small right now.

Amazing build, also what 3D program do you use?

Ohhhh. Yah, I've been on there a lot, posted this there too.

I love the S4 Mini, Nice paint job.

On completed builds, some people joke and put food on there.

I said on completed builds. I'm sorry, I didn't mean it like that. On forum posts or completed builds, some people put those things in their build. They aren't listed anywhere obvious.

Yah, I love the food section. On the request part addition part of the PCPP forum, I may just ask to add some Coke or Pepsi.

Here's my food... http://pcpartpicker.com/products/food/

Np, I've never heard about you guys but once I do a custom project I am get some stuff from the website.

Hey could you get this edited
https://modguru.net/product/led-strip-rgb/
lenght to length twice