Atlas780

I can overclock timing? Didn't know that

Just use one in single channel?

Yeah, I have the here. Thing is, I'm trying to optimize performance in satisfactory and someone on a forum mentioned it maybe good for low ram latency. i tried just pulling out the Crucial, but it just gave me 2FPS avg.

Hello there, I have a System with a Core i7-6700k and a random selection of memory. I'm thinking about what I should use. I have this: - Ballistix BLS16G4D240FSB 16 GB 2400MHz 16-16-16-39 - Crucial CT16G4DFD8266 16 GB 2666MHz CL 19 - Corsair CMV8GX4M1A2133C15 2133 MHz 15-15-15-36 - Samsung M378A1K43CB2 8GB 2400MHz CL17-17-17 Now, I don't know which combination I should use. I want to use at least dual channel, but I want to keep the Latency as far down as possible. My BIOS has support for Linked and unlinked DRAM Timing. What do you think I should use?

Good you mention stuck because it never goes away. Even after restart of HWinfo and Reset of Values, in Idle it's stuck to yes and running Prime95 doesn't change anything about it. Thanks, I will try that. But probably in a few hours, it's getting late here and that is something for tomorrow ^^

Exaclty the difference, it stays at 4.5 under SIngle Core Load and Idle, Full Load, it drops down. I have a CoolerMaster 120mm AiO, don't know the exact model cause I bought it with the CPU and Board used. But like all the data shows, cooling doesn't seem to be the problem. Thanks for the tip, I tried it, but it doesn't detect any throtteling: Also the CPU Package Power spikes at around 80 and even the stock TDP is 91W (although I don't know if you can compare that). I added a whole Log file as an attachment, but I don't think it will tell you anymore. log.CSV

the 4.5 GHz Overclock is set in BIOS, a friend said I whould install the tool to see if the configs stick. And also I can't take screenshots in BIOS

Hey guys, so I'm not an expert or anyhing regarding overclocking. I bought a used i7-6700k with a Z170 board. I have it fixed to 4,5 GHz on all cores and the system is stable, here are my configs: As you can see, I haven't touched the Voltage there, because I'm scared I would brick it. So it runs on 4.5, but when I give it a multicore load it immediatly throttles. It's not a temperature problem tho: This was with Cinebench R20 Multicore (left) and the Intel Extreme Tuning Utility integrated Benchmark. Now this was Cinebench R20 Single Core and it pretty much stays at the frequency, although it does seem to spread the load between the cores when I look at Task Manager, which I don't really understand. I tried overvolting it a little (Offset of +0,020 V), but didn't had the courage to go for more and it didn't change anything. So I reverted it. Any experts here who might have some Ideas why it's behaving this way and what to do about it to keep the overclock stable?

Thanks for the suggestions, but these are just too expensive. I just look for a somewhat color accurate 1440p Monitor that has a <5ms input delay. Don't need high refresh rate or something.

Hi Guys, hope here are some Monitor Experts. I'm looking for a monitor for a friend. She does graphic design, but also gaming. Would like it to have 1440p and good color accuracy, but not a huge input delay. High refreshrate is not that important. The prive range would be around 300€. Is there something out there at this price? I found the "Dell UltraSharp U2719D", but it's a little expensive and it has a 8ms delay.

Just tried that too, didn't do anything. (And ofc I'm restarting the service) I don't think its the config, when I got my firewall active or the entry isn't in the Config I get a orange connecting in my control. Now Its online, but as soon as I click on it it changes to yellow updating.

Tried it, changes nothing

I already written on the F@H Forum but got no response there. I set up my old dual Xon Server for this with a Virtual CentOs Machine and installed the FaH Client. But I got two problems with it I don't know how to resolve. Just before, here is my /etc/fahclient/config.xml: <config> <!-- Folding Slot Configuration --> <gpu v='false'/> <!-- Slot Control --> <power v='full'/> <!-- User Information --> <passkey v='XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX'/> <team v='223518'/> <user v='atlas'/> <!-- Folding Slots --> <slot id='0' type='CPU'/> <allow>127.0.0.1 192.168.178.29</allow> </config> And btw, When I start the service, it says Fail, but I can see in the Log that it is indeed running. 1. I can't connect to my control on my main PC which is 192.168.178.29. The firewall is disabled and I can see the open Port on netstat. I can also connect via telnet on the port. I can add it into my Control, and when I'm not on it, it says Status = online. But when I click on it to see what it's doing, it changes to "Updating" and I can't see anything. Also, when I add <web-allow>127.0.0.1 192.168.178.29</web-allow> to my config, it won't start at all, no errors in the log, so I can't check what its doing from the web interface. 2. It seems to be folding hence the logs outputs these rows: 06:15:23:WU00:FS00:0xa7:Completed 490000 out of 500000 steps (98%) 06:16:38:WU00:FS00:0xa7:Completed 495000 out of 500000 steps (99%) But I don't think the points are contributed to my account. When I look here https://stats.foldingathome.org/donor/Atlas I see that the Date of the Last WU isn't the same as on my machine (I temp. disabled my PC Folding to see this). Also I think I would have more Points if it would actually count on that. I'm sorry that I'm posting here with this problem, but I couldn't get any help on the correct forum and thought here might be a few experts.

Youn can still do it and just set your devices manually to the DNS IP. It will work just fine, just a little bit more hassel

I work in a small Webshop Company in the tech department. Unfortunaly we dont get notebooks, we will just buy the newest HP ProDesk with an i7 for Java-Devs and normally i5 for the rest with RAM being between 8 - 32 GB and some random gpu, if even external. Although, out graphics department have Macs, the newest beeing from 2014 tho

I runned my Pi 3 with a 1A once, so I think you should be fine

Thanks for your feedback, and dont worry I have multiple Backups on external drives. And I will soon put a encrypted Backup in the cloud. @Scheer Your idea sounds interesting, I will look into it.

I would recommend getting a WQHD (1440p) Monitor with 144Hz and maybe FreeSync. Linus did a video about this a short while ago:

Thanks for your feedback, I think I'm gonna go with three or four WD Blues in RAID then.

http://vault.centos.org/ you can download pretty much every version here, just select the version you want, click on iso and go from there

Sounds stupid, but I had the problem with a friend of mine. Is the Monitor plugged into the graphics card or the mainboard video?

Hi guys, I'm planning to build myself a NAS for home. I'm using some old PC parts and a silent case for it, because it keeps the cost down, but I don't want to reuse my old 1TB HDDs. Therefore I want to buy probably three 4TB HDDs. But about this there are two things that do confuse me: 1. Why are most of the 4TB drives just 5400 RPM? I thought 7200 RPM is pretty normal nowadays. And will I be fine with 5400 RPM drives or is it worth it to spend extra to get 7200 RPM? I'm not doing heavy stuff on the NAS, just accesing my files (picutres/music/etc) and streaming media (videos, mostly Full-HD). 2. Should I invest in special NAS Drives (like the WD Red)? Because its a heavy bump in price. For example, for the price of three WD Red 4TB I could literally buy four WD Blue 4TB. Is the advantage of the WD Red so much bigger? I had some really old refurbished 1TB WD Blues in my Home Server for a few years and none of them broke. In my whole life just one HDD failed on me (a really old seagate). I would love to hear your advice and oppinions. Greetings Philip

I would buy it from a college with 8GB of RAM and a Cooler for 50€.. Even with an H170 Chipset it is a pretty good deal

Hey guys, What do you think is a good CPU to go with an H170 Mainboard? I was thinking about an 6600k, but I would loose the Overclocking Capability (or dont? a college said he could overclock with it a little, dunno why). Price budget would be around 200€. I would use it mainly for gaming