Jump to content

Marziin111

Member
  • Posts

    59
  • Joined

  • Last visited

Everything posted by Marziin111

  1. Hello, I need some help with my motherboard, the Asus ROG Maximus XI Hero. After shutting down the pc, the motherboard's led lighting stays on. I tried this solution: https://rog.asus.com/forum/showthread.php?52422-HOW-TO-Turning-off-All-motherboar-lights-when-shut-down-Keep-ROG-LED-when-PC-is-on. But after I enabled it, my pc always takes two attempts to boot. Any solutions? The psu is a bequiet dark power pro 11. Thanks for your help.
  2. I hope you did not cancel your plans on a monoblock for the XI Hero ?
  3. Ok Yeah X-Flow would be nice Do you know if there will be a D-RGB version of the Vector GPU block?
  4. Hi, thanks for your reply. I will not forget the backplate I just ordered the Velocity D-RGB Is it possible to keep the motherboard lighting that covers the I/O panel or do I have to remove that when using the monoblock? And is the monoblock a D-RGB? Do you plan releasing an X-Flow Rad in the near future btw?
  5. Nothing yet. I am buying the EK DIY Kit. Do you have any recommendations for cutting and bending? Don't want to use angled fittings to be honest.
  6. I followed these steps: 1. Asus Board 2. WiFi 3. Not more than $350 So I decided between Strix 390-E and the Hero. Preferred look of the Hero
  7. Hello guys, as I am pretty new to water cooling I wanted to ask if you can check my selected parts. The PC has the following specs: Phanteks Evolv X Asus Maximus Hero Xi (WiFi) i7 9700K RTX 2080ti 1000 Watt beQuiet PSU As I made good experiences with EK WB I wanted to stick with them for the most parts. If there is a better solution for any part, I'd like to here your recommendation. Pump: https://www.ekwb.com/shop/ek-xtop-ddc-3-2-pwm-elite-acetal-incl-pump (must fit in the Basement, so no D5) Reservoir: https://www.ekwb.com/shop/ek-res-x3-250-lite Radiator Front: https://www.alphacool.com/shop/radiatoren/radiatoren-aktiv/20474/alphacool-nexxxos-st30-full-copper-x-flow-360mm-Radiator (X-Flow, to get from the pump to the CPU block) Radiator Top: https://www.ekwb.com/shop/ek-coolstream-se-360-slim-triple CPU Block: https://www.ekwb.com/shop/ek-velocity-rgb-nickel-acetal GPU Block: https://www.ekwb.com/shop/ek-vector-rtx-2080-ti-rgb-nickel-acetal Tubing: https://www.ekwb.com/shop/ek-hd-tube-12-16mm-500mm-2-pcs Fittings: https://www.ekwb.com/shop/ek-hdc-fitting-16mm-g1-4-elox-black Thanks for your help. Greetings Marzii
  8. Hello, does anyone know what this sh** is? I am using an Asus Maximus XI Hero. Greetings Marcel
  9. Hello, I just installed a WD Black NVMe SSD on an ASUS Z170-A. There is nothing else connected to any SATA port. Unfortunately the the SSD is not shown and I can not install windows on it. Do you have any idea what's wrong? CPU is a i5-6600 and the GPU a ASUS ROG Strip 970. BIOS Ver. 0604. Thanks for your help! Greetings Marzii
  10. So basically I know as much as from the beginning. I'll go with an Asus board. No clue about the CPU though. Why should the supported amount of PCIe lanes be irrelevant? How many lanes are needed for a GPU?
  11. https://ark.intel.com/products/126684/Intel-Core-i7-8700K-Processor-12M-Cache-up-to-4-70-GHz-
  12. I found this on the Intel site, that is why I was wondering: PCI Express Configurations ‡Up to 1x16, 2x8, 1x8+2x4 Max # of PCI Express Lanes16
  13. Ok. The i7 8700k has 16 PCIe lanes. If I go with a WiFi board I will loose 4 lanes due to the WiFi model (which also blocks one m2 slot) and 4 for a m2 SSD? So I only got 8 left for GPU?
  14. Do the motherboards have comparable overclocking possibilities?
  15. Hello, I am looking for a gaming CPU to run with a water-cooled RTX 2080 Ti including a new motherboard of course. I have been looking at the Ryzen 2 2700X and the Intel Core i7 8700k as well as the 9700k. For the 9700K Intel removed HT, is this a big deal? Motherboard-wise I want to stick with Asus and go with something like a ROG Strix or a ROG Maximus (Crosshair). Which one would you recommand? The Maximus Hero has a price difference of 70€ for the AMD and a bit more than 100€ for the Intel one compared to the Strix. Is it worth the extra money? Greetings
  16. Wall mount is a good idea. Thanks.
  17. Hello, I am looking for a table stand for my 24" monitor. My table has a depth of 1 meter and I am sitting really close to the monitor so the stand has to be long enough. Can you recommend me any? I don't want to pay much more than 60$. thanks Marcel
  18. Hello guys, I am looking for a new power supply for my new build. It will be placed in a S340 Elite and has to power: GTX 1060 6GB i5 7600K (will be OCed) with a NZXT Kraken X62 16GB of Ram and 4 SSds I want the PSU to fit my black and white build, so it would be cool if you could recommend me some cable extensions as well. Thanks for your help
  19. Marziin111

    New Headset

    Hei guys, I am looking for a new headset. I live in Germany and that is why I thought about buying the MMX300. What do you think about the headset? Greetings
  20. I want it to perfectly match the case style
  21. I am looking for a new Phanteks cooler. Which one would you recommend me for overclocking an 7600K to 4.8GHz? My case is the Phanteks P400S tempered glas.
  22. Looking for a new budget case, around 70$. I want an ATX case with a window.
  23. I am currently looking at these motherboards: http://geizhals.de/?cmp=1544604&cmp=1558866&cmp=1557469&cmp=1544860&cmp=1557475&cmp=1558141&cmp=1557962&cmp=1557471 . Which one would you recommend? I am pairing it with an i5 7600K
×